-Makes Life Powerful PNI-200501500VA001 500VA Pure Sine Wave Inverter General Description: PNI-200501500VA001 series of inverters are innovative product in the power inverter world. This inverter accepts wide range of the input DC voltage from the battery, and provides 230VAC, 50Hz clean sine wave output. This inverter offers relatively low harmonic distortion in the output voltage and excellent load regulation. The inverter efficiency remains grater then 90% over the full output power range and full DC input voltage range. This power efficient and lightweight inverter has inbuilt battery charger, which charges the fully discharged battery (12V, 150AH) within 5 hours this charger puts nearly 80% energy in the battery with in 3 hours. Not only this, the battery charger uses four stage-charging techniques, which maximize the charging efficiency and battery operational life. The battery charger takes AC input power from your home power socket at ≈ 0.99 power factor, which again saves the AC input power during charging. The high efficiency of the inverter allows the power availability for longer duration (large back-up time >5.0 hours (approx.) under fully charged battery and full output load conditions. Backup time will be increased in case of lower output load connected to the inverter). Features: 1. 2. 3. 4. 5. 6. Sine Pulse Width Modulation (SPWM) inverter control technology. Output Voltage waveform is clean 50Hz Sine Wave. Low output voltage harmonic distortion. Accurate Output power limiting (by cycle by cycle output load current limit) Accepts wide range of the input DC voltage. Uses very fast, low loss Power MOSFET & smaller magnetic parts, hence provides comparatively higher power conversion efficiency. 7. Overall inverter weight is less then 1kg, hence offers high power density. 8. Includes very fast and efficient Battery Charger. 9. Battery charger saves a lot power during the battery charging. 10. Battery charger charges your inverter’s fully discharged battery in 5Hours. 11. Battery charger accepts universal input voltage range, which still allows your fully discharged battery to be charged in same time, even if your home AC input voltage is 85V. 12. Automatic “ON” or “OFF” as per the availability of the AC input power. 13. Under battery voltage protection. 14. Excellent load and line regulation. ©2005 Power Nucleus Inc. PN200501500VA001 www.powernucleus.com PNI-200501500VA001 500VA Pure Sine Wave Inverter January 2005 PNI-200501500VA001 Technical Specifications of PN- 200501500VA001 Input Power Source : Lead Acid Batteries Input Voltage Range : 9.5VDC to 16VDC Output Power : 500VA (Max) Peak Output Power : 575VA Output Voltage : 230VAC, -2%, Sine Wave 50Hz Output Voltage THD : <5% Over load protection : Yes (output current is limited to 2.5A) Inverter overall efficiency : ≅ 90% Control technology : Sine Pulse Width Modulation Inverter Control frequency : 50kHz. Input Voltage to Battery Charger : 85VAC to 260VAC (48Hz to 62Hz) Battery Charging Time : ≤ 5.5H for 12V, 150AH Lead Acid Battery Charger Input power factor : 0.99 Total Inverter Weight : 1.0kg. (Approx.) (Without batteries) ©2005 Power Nucleus Inc. PN200501500VA001 www.powernucleus.com IMPORTANT NOTE Power Nucleus reserves the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement. Power Nucleus’s products are not authorized for the use as life support applications/devices or medical system without the written permission of the president of Power Nucleus Inc. www.powernucleus.com ©2005 Power Nucleus Inc. PN200501500VA001 www.powernucleus.com ©2005 Power Nucleus Inc. PN200501500VA001 www.powernucleus.com ©2005 Power Nucleus Inc. PN200501500VA001 www.powernucleus.com