Chunghwa Picture Tubes, Ltd. Product Specification TFT LCD CLAA057VA01CW ACCEPTED BY : V0.3 APPROVED BY CHECKED BY PREPARED BY Prepared by : Small &Medium Product Planning Management Department Small &Medium Product General Division CHUNGHWA PICTURE TUBES, LTD. Doc.No: CLAA057VA01CW—Ver0.3 Issue Date: 2006/11/6 CPT CHUNGHWA PICTURES TUBES, LTD., REVISION STATUS Revision Description Notice 0.0 First revision (Tentative) Product name change to CLAA057VA01CW 0.1 0.2 0.3 Revise the contact of 1.OVERVIEW (P.3) The thickness of MDL appearance is revised for 6.6mm (P.3) MDL weight is revised for 110g (P.3) Delete three items Forward Current, Reverse Voltage, Pulse forward current in 2.ABSOLUTE MAXIMUM RATINGS(P4) Voltage of LED power in the 3.ELECTRICAL CHARACTERISTICS (VLED) as Minimum= 4.5V Stand= 5V & Maximum= 5.5V. Revision LED power electric current mark is ILED in the 3.ELECTRICAL Revise standard specification value:VLED is input for 5.0 V. Maximum specification value:VLEDis input for 4.5 V. Revise 4.INTERFACE CONNECTION SYMBOL & DESCRIPTION of 2nd, 3rd & 8th pin. Alter ADJ: Luminance control pin, the bigger the brighter its pulse duty is. Revise 5. Input signal (DE only mode): Dot Clock (fCLK) TYP value is 25. Modification of figures of front view and back view in the 7. MECHANICAL DIMENSION. Modification of the high temperature keeping testing is 95℃ for 240 hours. Thermal shock testing is -30℃(0.5hours) to 85℃(0.5hours) for 200 cycles in 9.RELIABILITY TEST. Supplementary: Low-temperature turn on testing condition : Backlight unit always turn on. 4. interface connection(p8.) Power consumption(p.4) TFT-LCD current comsumption (p.6) MECHANICAL DIMENSION (p.14 &p.15) CPT Confidential 2/19 Page Rev. Date 18 18 2006/9/6 2006/9/13 2006/10/31 2006/11/6 CLAA057VA01CW _Specification_2006-11-06 CPT CHUNGHWA PICTURES TUBES, LTD., CONTENTS 1. OVERVIEW ....................................................................................................................... 4 2. ABSOLUTE MAXIMUM RATINGS ................................................................................... 5 3. ELECTRICAL CHARACTERISTICS ................................................................................ 6 3.1TFT LCD .................................................................................................................................... 6 3.2TFT-LCD current comsumption.............................................................................................. 6 3.3 Power、Signal sequence ....................................................................................................... 7 4. INTERFACE CONNECTION............................................................................................. 8 5. INPUT SIGNAL(DE ONLY MODE) ................................................................................. 10 5.1 Timing Specification .............................................................................................................. 10 5.2 Timing sequence(Timing chart)........................................................................................... 11 5.3 Color Data Assignment......................................................................................................... 12 6. BLOCK DIAGRAM ......................................................................................................... 13 7. MECHANICAL DIMENSION ........................................................................................... 14 7.1 Front Side ............................................................................................................................... 14 7.2 Rear Side ................................................................................................................................ 15 8. OPTICAL CHARACTERISTICS ..................................................................................... 16 9. RELIABILITY TEST ........................................................................................................ 19 9-1. Temperature and humidity.................................................................................................. 19 9-2. Shock and Vibration............................................................................................................. 19 9-3. Judgment standard .............................................................................................................. 19 CPT Confidential 3/19 CLAA057VA01CW _Specification_2006-11-06 CPT CHUNGHWA PICTURES TUBES, LTD., 1. OVERVIEW CLAA057VAO1CW is 5.7" color TFT-LCD(Thin Film Transistor Liquid Crystal Display)module composed of LCD panel,driver ICs,control circuit,and LED backlight. The 14.52cm(5.7") screen produces a high resolution image that is composed of 640×480 pixel elements in a stripe arrangement.Display 262K colors by 6 Bit R.G.B signal input.Use 3.3 Voltage to drive the power of LCD system,and 5 Voltage to drive the black light LED. General specifications are summarized in the following table: ITEM Panel Size Display Area (mm) Number of Pixels Pixel Pitch (mm) Color Pixel Arrangement Display Mode Number of colors Viewing Direction Response Time (Tr+Tf) Brightness(cd/m2) NTSC ratio Viewing Angle(BL on,CR≧10) Electrical Interface(data) Power consumption(W) Outline Dimension(in mm) Weight(g) BL unit Surface Treament CPT Confidential SPECIFICATION 5.7 inch(panel diagonal) 116.16(W)×87.12(H) 640×3(H)×480(V) 0.1815(H)×0.1815(V) RGB vertical stripe Normally white 262,144 6 o´clock 30ms 220nit(typ) 50% 140 degree(H),100degree(V) TTL 2.1W 127(W)×100(H)×6.6(D) 110g LED Anti-Glare,Hardness:3H 4/19 CLAA057VA01CW _Specification_2006-11-06 CPT CHUNGHWA PICTURES TUBES, LTD., 2. ABSOLUTE MAXIMUM RATINGS Symbol Vcc DCLK,DE,R0,G0 ,B0~R5,G5,B5 VESDc VESDm IRUSH Top Tstg Item Power Supply Voltage Signal Input Voltage Static Electricity ICC Rush Current Operation Temperature Storage Temperature Min. -0.5 Max. 5.0 Unit V -0.5 Vcc + 0.5 V -200 -15K -30 -40 +200 +15K 1 85 95 V V A ℃ ℃ Note *2) *3) *1) *1) Remarks: *1) If users use the product out off the environmemt operation range(temperature and humidity),it will concern for visual quality. *2) Test Condition: IEC 61000-4-2 , VESDc :Contact discharge to input connector VESDm:Contact discharge to module *3) The input pulse-current measurement system as below: 3.3V Q1 VIN ( LCD Input) C1 1uF R1 47k Q2 R2 Crl signal 12V 1k C2 R3 C3 47k 10000pF 1uF Control signal:High(+3.3V)→Low(GND) Supply Voltage of rising time should be from R3 and C2 tune to 550 us. *4) Ifp Conditions : Pulse Width=10msec and Duty=1/10。 CPT Confidential 5/19 CLAA057VA01CW _Specification_2006-11-06 CPT CHUNGHWA PICTURES TUBES, LTD., 3. ELECTRICAL CHARACTERISTICS 3.1TFT LCD Item Power Supply Voltage For LCD Power Supply Voltage For LED Logic Input Voltage Symbol VCC VLED VIH VIL Min. 3.0 4.5 VCC*0.7 0 Typ 3.3 5 --- Max. 3.6 5.5 VCC VCC*0.3 Unit V V V V Ta=25℃ Note *1) Remarks: *1) VCC –dip codition: When 2.7 V≦VCC<3.0V,td≦10ms. VCC>3.0V,VCC-dip condition should be same as VCC-turn-on condition. 3.2TFT-LCD current comsumption Item LCD power current Symbol ICC LED power current ILED Min. -- Typ 150 Max. 190 Unit mA Note *1) 320 360 mA *2) *1) Typical: Under 64 gray pattern Maximum: Under black pattern *2) Typical: When VLED is 5.0V Maximum: When VLED is 4.5V CPT Confidential 6/19 CLAA057VA01CW _Specification_2006-11-06 CPT CHUNGHWA PICTURES TUBES, LTD., 3.3 Power、Signal sequence t1≦10ms 1 sec≦t5 50ms≦t2 200ms≦t6 0<t3≦50ms 200ms≦t7 0<t4≦10ms Vin=3.3V 3.0V 3.0V data LCD Power Supply Logic Signal 0.3V 0.3V t1 t2 t3 t4 0.3V t5 VL Backlight Power Supply t6 t7 D ata: R G B D A T A , D C LK, D EN A CPT Confidential 7/19 CLAA057VA01CW _Specification_2006-11-06 CPT CHUNGHWA PICTURES TUBES, LTD., 4. INTERFACE CONNECTION (Connector type:40pin/0.5mm pitch/Bottom contact)-089N40-000R00-G2 SYMBOL DESCRIPTION Pin NO. U/D Up or Down Display Control 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 NC NC Vled Vled Vled Vcc NC DE VSS VSS ADJ B5 B4 B3 VSS B2 B1 B0 VSS G5 G4 G3 VSS G2 G1 G0 VSS R5 R4 R3 VSS R2 R1 R0 VSS VSS DCLK VSS L/R Customer non-connect ; initial pull high =DE mod NC Power Supply for Digital Circuit LED Power Supply for Digital Circuit LED Power Supply for Digital Circuit LED Power Supply for Digital Circuit LCD NC Data Enable Power Ground Power Ground Adjust for LED brightness Blue Data 5 (MSB) Blue Data 4 Blue Data 3 Power Ground Blue Data 2 Blue Data 1 Blue Data 0 (LSB) Power Ground Green Data 5 (MSB) Green Data 4 Green Data 3 Power Ground Green Data 2 Green Data 1 Green Data 0 (LSB) Power Ground Red Data 5 (MSB) Red Data 4 Red Data 3 Power Ground Red Data 2 Red Data 1 Red Data 0 (LSB) Power Ground Power Ground Clock Signals Power Ground Left or Right Display Control Remarks: 1).ADJ adjust brightness to control Pin,Pulse duty the bigger the brighter. CPT Confidential 8/19 CLAA057VA01CW _Specification_2006-11-06 CPT CHUNGHWA PICTURES TUBES, LTD., 2) ADJ signal =0~3.3V,operation frequency:20±5KHZ 3) GND Pin must ground contact,can not be floating. 4) U/D and L/R are controled function U/D Function L/R 1 0 Normally display 0 0 Left and Right opposite 1 1 Up and Down opposite Left and Right opposite,Up and Down opposite 0 1 CPT Confidential 9/19 CLAA057VA01CW _Specification_2006-11-06 CPT CHUNGHWA PICTURES TUBES, LTD., 5. INPUT SIGNAL(DE ONLY MODE) 5.1 Timing Specification ITEM Period Dot Clock DCLK Low Level Width High Level Width Setup Time Hold time Horizontal Period Horizontal Valid DE Horizontal Blank Vertical Period Vertical Valid Vertical Blank Vertical Frequency Setup Time DATA Hold Time SYMBOL tCLK fCLK tWCL tWCH tDES tDEH tHP tHV tHBK tVP tVV tVBK fV tDS tDH MIN. 16.67 5 0.3 0.3 5 10 750 110 515 35 55 4 8 TYP. MAX. 25 800 640 160 525 480 45 60 - 40 900 UNIT ns MHz ns ns tCLK 260 560 tHP 80 65 - Hz ns Remarks: *1) High level of logic signal is 80%。Low level of logic signal is 20%。 *2) This module is operated by DE only mode CPT Confidential 10/19 CLAA057VA01CW _Specification_2006-11-06 CPT CHUNGHWA PICTURES TUBES, LTD., 5.2 Timing sequence(Timing chart) CPT Confidential 11/19 CLAA057VA01CW _Specification_2006-11-06 CPT CHUNGHWA PICTURES TUBES, LTD., 5.3 Color Data Assignment COLOR INPUT DATA R DATA R5 G DATA R4 R3 R2 R1 R0 MSB G5 B DATA G4 G3 G2 G1 LSB MSB G0 B5 B4 B3 B2 B1 LSB MSB B0 LSB BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RED(63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 BASIC GREEN(63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 COLOR BLUE(63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 CYAN 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 MAGENTA 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 YELLOW 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 WHITE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 RED(0) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RED(1) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 RED(2) 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 RED(62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 RED(63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 GREEN(0) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GREEN(1) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 GREEN(2) 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 GREEN(62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 GREEN(63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 BLUE(0) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 BLUE(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 BLUE(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 BLUE(62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 BLUE(63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 RED GREEN BLUE Remarks: (1) Definition of Gray Scale color(n):n is series of Gray Scale The more n value is, the bright Gray Scale. (2)Data:1-High,0-Low CPT Confidential 12/19 CLAA057VA01CW _Specification_2006-11-06 CPT CHUNGHWA PICTURES TUBES, LTD., 6. BLOCK DIAGRAM CPT Confidential 13/19 CLAA057VA01CW _Specification_2006-11-06 CPT CHUNGHWA PICTURES TUBES, LTD., 7. MECHANICAL DIMENSION 7.1 Front Side CPT Confidential [Unit:mm] 14/19 CLAA057VA01CW _Specification_2006-11-06 CPT CHUNGHWA PICTURES TUBES, LTD., 7.2 Rear Side [Unit:mm] Remark:Un-indication tolerance is ±0.3mm CPT Confidential 15/19 CLAA057VA01CW _Specification_2006-11-06 CPT CHUNGHWA PICTURES TUBES, LTD., 8. OPTICAL CHARACTERISTICS ITEM SYMBOL CONDITION Constrast Ratio CR Point-5 200 300 Luminance Lw Point-5 180 220 Luminance Uniformity Response Time (White - Black) Horizontal Viewing ⊗ 70 80 Angle Vertical Color Coordinate MIN. TYP. MAX. UNIT Remarks -- -- *1)*2)*3) -- cd/m2 *1)*3) -- % *1)*3) Tr+ Tf Point-5 -- 30 50 ms *1)*3)*5) ψ CR≧10 Point-5 120 140 -- ° *1)*2)*4) 80 100 -- ° *1)*2)*4) -- *1)*3) θ White Wx Wy 0.273 0.289 0.313 0.329 0.353 0.369 Red Rx Ry 0.570 0.296 0.610 0.336 0.650 0.376 Green Gx Gy 0.290 0.534 0.330 0.574 0.370 0.614 Blue Bx By 0.106 0.070 0.146 0.110 0.186 0.150 Point-5 Remarks: *1)Measure condition:25℃±2℃,60±10%RH,under10 Lux in the dark room.BM-5A (TOPCON),viewing angle2°,VCC=3.3V,VDD=3.3V. *2)Definition of contrast ratio: Contrast Ratio (CR)= (White) Luminance of ON ÷ (Black) Luminance of OFF CPT Confidential 16/19 CLAA057VA01CW _Specification_2006-11-06 CPT CHUNGHWA PICTURES TUBES, LTD., *3) Definition of luminance: Measure white luminance on the point 5 as figure8-1 Definition of Luminance Uniformity: Measure white luminance on the point1~9 as figure8-1 △L = [L(MIN)/L(MAX)]×100 Fig8-1 Measuring point *4) Definition of Viewing Angle(θ,ψ),refer to Fig8-2 as below: Fig8-2 Definition of Viewing Angle *5) Definition of Response Time.(White-Black) CPT Confidential 17/19 CLAA057VA01CW _Specification_2006-11-06 CPT CHUNGHWA PICTURES TUBES, LTD., White(63th) 90% 90% Luminance 10% 10% tr Black(0) tf Fig8-3 Definition of Response Time(White-Black) CPT Confidential 18/19 CLAA057VA01CW _Specification_2006-11-06 CPT CHUNGHWA PICTURES TUBES, LTD., 9. RELIABILITY TEST 9-1. Temperature and humidity TEST ITEMS High Temperature Operation High Temperature Storage High Temperature High Humidity Operation Low Temperature Operation Low Temperature Storage CONDITIONS 85℃,240H 95℃,240H 60℃,90%RH,240H -30℃,240H, Backlight unit always turn on -40℃,240H -30℃(0.5Hr)~ 85℃(0.5Hr) 200 cycles Thermal Shock 9-2. Shock and Vibration TEST ITEMS Shock (Non-operation) Vibration (Non-operation) CONDITIONS a a a a a a a a Shock level:980m/s2(equel to 100G) Waveform:half sinusoidal wave,6ms. Number of shocks:one shock input in each direction of three mutually perpendicular axes for a total of three shock inputs. Frequency range:8~33.3Hz Stoke:1.3mm Vibration:sinusodial wave,perpendicularaxis(both x,y,z axis:2Hrs). Sweep:2.9G,33.3Hz-400Hz Cycle:15min 9-3. Judgment standard The Judgment of the above test should be made as follow: Pass:Normal display image with no obvious non-uniformity and no line defect.Partial trasformation of the module parts should be ignored. Fail:No display image,obvious non-uniformity,or line defect. CPT Confidential 19/19 CLAA057VA01CW _Specification_2006-11-06