PS231S - Silicon Touch Technology Inc.

PS231S
Version
Issue Date
File Name
Total Pages
: A.001
: 2005/03/30
: SP-PS231S-A.001.doc
: 11
5-Channel Secondary Monitoring IC
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC.
PS231S
PS231S
5-Channel Secondary Monitoring IC
General Description
PS231S is specially designed for switching power supply system. Four important
functions of PS231S are the followings: over-voltage protection, over-current protection,
under-voltage protection and power good signal generating.
OVP/UVP (Over-Voltage/Under-Voltage Protection) monitors 3.3V, 5V and triple
12V to protect our power supply and PC, FPO/ goes to high when one of these supply
voltages exceeds their normal operation voltage range.
OCP (Over Current Protection) monitors IS33, IS5, IS12A, IS12B, IS12C input
current sense. An adjustable over-current condition composed of Iref and “protection
current range resistor” helps users design OCP easily.
An additional protection input pin provides the flexibility for design protection
circuit.
Power good signal generating notifies personal computer when power supply is
ready or power supply is going to shutdown, therefore it can provide a reliable power
supply environment.
Features
•
•
•
•
•
•
•
•
•
•
Over/Under-voltage protection and lock out
Over-current protection and lock out
Additional protection input
Fault protection output with open drain output stage
Open drain power good output signal for power good input
Built-in 300mS power good delay
AC on 75ms delay for UV/OC protection
38mS PSON/ control de-bounce
Wide power supply range (3.8V~16V)
Special care for AC power off
Version:A.001
5-Channel Secondary Monitoring IC
-1-
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC.
PS231S
Block Diagram
FPO/
delay
VS
S Q
155KΩ
73uS
VS12A
VS12B
VS12C
R
1MΩ
UV
Vref
9KΩ
delay
38mS
De-bounce
OV
Vref
H : 4mS
L : 4.5uS
16KΩ
VCC
30KΩ
VCCI
2KΩ
PSON/
1.25V
12 OV
4.5V
90KΩ
12 UV
Pext
VS5
2.6V
58KΩ
5 UV
13.5KΩ Vref
delay
1
0
5 OV
H : 75mS
L : 4.5uS
18.5KΩ Vref
1.13V
PGI
0.63V
R
Q S
VS33
38.5KΩ
1.25V
3.3 UV
23.5KΩ Vref
VCCI
3.3 OV
28KΩ
Vref
1MΩ
PGO
delay
73uS
De-bounce
H : 300mS
L : 4.5uS
VCCI
VS
IS
IS12A
IS12B
Step Down
to near 2.5V
OC
delay
Iref X 8
1mS
IS12C
12 OC
Power On
Reset
delay
VCCI
IS5
Step Down
to near 2.5V
5 OC
H : 20mS
L : 4.5uS
POR
Internal
Power
Constant Current
Source Iref
VCCI = 4V
VCC
Iref X 8
VCCI
IS33
Step Down
to near 2.5V
Band-Gap
Reference
3.3 OC
RI
Vref
1.25V
Clock
Generator
CLK
VCC
GND
Iref X 8
Version:A.001
5-Channel Secondary Monitoring IC
-2-
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC.
PS231S
Timing Chart
Vcc
PSON/
FPO/
PGI
VS12A
VS12B
VS12C
VS5
VS33
Pext
IS12A
IS12B
IS12C
IS5
IS33
PGO
Td1
Tb1
Td3
Td2
AC
turn on
VPGI
UVP/OVP/OCP
Pext protect
PSON/
turn on
PSON/
turn off
PSON/
turn on
AC
turn off
1.25V
1.13V
0.63V
Td1
Td2
OVP
OVP/UVP/OCP/Pext
OVP
Version:A.001
5-Channel Secondary Monitoring IC
-3-
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC.
PS231S
Pin Descriptions
Pin No
1
PIN NAME
PGI
Descriptions
Power good input signal pin
2
GND
Ground
3
FPO/
Inverted fault protection output ,open drain output stage
4
PSON/
Remote ON/OFF control input pin
5
IS12A
12V(1) over current protection input pin
6
RI
Current sense setting
7
IS12B
12V(2) over current protection input pin
8
VS12B
12V(2) over/under voltage protection input pin
9
VS12C
12V(3) over/under voltage protection input pin
10
IS12C
12V(3) over current protection input pin
11
Pext
External protection detect input pin
12
IS5
5.0V over current protection input pin
13
IS33
3.3V over current protection input pin
14
VS12A
12V(1) over/under voltage protection input pin
15
VS33
3.3V over/under voltage protection input pin
16
VS5
5.0V over/under voltage protection input pin
17
VCC
Power supply
18
PGO
Power good output signal pin , open drain output stage
Absolute Maximum Ratings
Parameter
Rating
Unit
Storage Temperature
(Tstg)
-40 to
+125
°C
Operating Temperature
(Topr)
-30 to
+90
°C
Supply Voltage
(VCC)
VCC
-0.5 to
+16.0
V
VS12(A,B,C), IS12(A,B,C)
-0.5 to
+16.0
V
VS5, IS5
-0.5 to
+9.0
V
VS33, IS33
-0.5 to
+7.0
V
PGI
-0.5 to
+16.0
V
PSON/, Pext
-0.5 to
Vcc+0.5
V
FPO/
-0.5 to
+16.0
V
PGO
-0.5 to
Vcc+0.5
V
RI
12.5 to
62.5
uA
Input Voltage Range
(VI)
Output Voltage Range
(VO)
Output Current for RI
(IRI)
Version:A.001
5-Channel Secondary Monitoring IC
-4-
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC.
PS231S
Electrical Characteristics, Vcc=12V, Ta = Full range. (unless otherwise specified)
Power Supply Section
Parameter
Conditions
Supply Voltage
MIN
3.8
Supply Current
Power On Reset Hysteresis (VHYST)
MAX
Unit
5.0
16.0
V
4.5
5.0
mA
3.2
3.4
3.6
V
-0.15
-0.3
-0.45
V
VPSON/ = 5V
Power On Reset Threshold Voltage (VPOR)
TYP
Over-Voltage Section
Parameter
Conditions
MIN
TYP
MAX
Unit
VS33
3.7
3.9
4.1
V
VS5
5.7
6.1
6.5
V
VS12A/B/C
13.1
13.8
14.5
V
Over-Voltage Threshold
Under-Voltage Section
Parameter
Conditions
MIN
TYP
MAX
Unit
VS33
2.0
2.2
2.4
V
VS5
3.3
3.5
3.7
V
VS12A/B/C
8.5
9.0
9.5
V
Under-Voltage Threshold
PGI, Analog Input
Parameter
Conditions
MIN
TYP
MAX
Unit
Threshold Voltage for start Td1
1.16
1.25
1.33
V
Threshold Voltage for start Td2
0.60
0.63
0.75
V
Threshold Voltage for mask OC,UV
1.05
1.13
1.21
V
Hysteresis (VHYST)*
-20
-50
-80
mV
* All of the comparator for PGI input in block diagram.
Version:A.001
5-Channel Secondary Monitoring IC
-5-
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC.
PS231S
Electrical Characteristics (Continued)
PGO, Open Drain Digital Output
Parameter
Conditions
Leakage Current (ILKG)
VPGO=5V
Low Level Output Voltage (VOL)
ISINK=10mA
MIN
TYP
MAX
Unit
5
uA
0.3
V
FPO/, Open Drain Digital Output
Parameter
Conditions
Leakage Current (ILKG)
VFPO/=5V
Low Level Output Voltage (VOL)
ISINK=20mA
MIN
TYP
MAX
Unit
5
uA
0.4
V
PSON/, Analog Input
Parameter
Conditions
MIN
TYP
MAX
Threshold Voltage
1.16
1.25
1.33
Hysteresis (VHYST)
20
50
80
Unit
V
mV
External Protection Detect Section
Parameter
Conditions
MIN
TYP
MAX
Unit
Threshold(VTH)
2.5
2.6
2.7
V
Hysteresis (VHYST)
20
50
80
mV
Switching Characteristics, Vcc=12V, Ta = Full range.
Parameter
Conditions
MIN
TYP
MAX
Unit
PGI to PGO Delay Time (Td1)
200
300
480
mS
Short Circuit Delay Time (Td2)
49
75
114
mS
PGO to FPO/ Delay Time (Td3)
2
4
6
mS
Under Voltage Delay Time (Td4)
0.6
1
1.4
mS
Over Current Delay Time (Td5)
13
20
27
mS
Over Voltage Delay Time (Td6)
47
73
110
uS
Pext Delay Time (Td7)
24
38
52
mS
PSON/ De-bounce Time (Tb1)
24
38
52
mS
PGO Noise De-glitch Time (Tb2)
47
73
110
uS
Version:A.001
5-Channel Secondary Monitoring IC
-6-
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC.
PS231S
Application
Typical 5 rails SPS
S.P.S. Secondary Side
RS5
+5V Output
RS33
+3.3V Coil
+3.3V Output
RS12(1)
+12V(1) Coil
+12V(1) Output
RS12(2)
+12V(2) Coil
+12V(2) Output
RS12(3)
+12V(3) Coil
+12V(3) Output
ROC12(3)
ROC5
ROC33
or
ROC12(1)
ROC12(2)
=
RPGO
4.7K
+5VSB
1 PGI
PGO 18
2 GND
Vcc 17
3 FPO/
VS5 16
PGO
+5VSB
1K
4 PSON/
PSON
5 IS12A
VS12A 14
IS33 13
RI
RPGI
CPGI
7 IS12B
IS5 12
8 VS12B
Pext 11
9 VS12C
IS12C 10
Cby
6 RI
VS33 15
Pext
PS231S
Notes:
1. Zener diode or resistor or both of them can be used in component X.
2. The bypass capacitor Cby suggests to be 0.1uF~ 10uF and layout nearby pin VCC.
3. The recommend sense values of RS12(1), RS12(2), RS5 and RS33 are ≥ 0.002Ω.
4. Over-Current Protection design example:
V
1.25
(1) I ref = 20 μA , RI = RI =
= 62.5 K (Ω )
I RI 20μ
(2) RS5=0.002 Ω , ΔV5V = 0.002 × I +5V = ROC 5 × 8 × I ref
(3) If +5V OCP trip point is 20A, ROC 5 =
0.002 × 20
= 250(Ω )
8 × 20 μ
Version:A.001
5-Channel Secondary Monitoring IC
-7-
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC.
PS231S
Package Specification
( 18-pin DIP )
E1
E
eB
θ°
D
A2
A
Seating Plane
A1
b1
e
b
0
5
S
10
0.0
Symbol
Dimension in mm
(MAX)
Dimension in inch
5.330
A1
0.380
(MIN)
0.015
(MIN)
A2
3.300
± 0.130
0.130
± 0.005
0.210
(TYP)
b
1.520
(TYP)
0.060
0.460
(TYP)
0.018
(TYP)
D
22.860
± 0.50
0.900
± 0.02
E
7.620
(TYP)
0.300
(TYP)
E1
6.350
± 0.130
0.250
± 0.005
e
2.540
(TYP)
0.100
(TYP)
eB
9.000
± 0.500
0.355
± 0.020
L
9.020
± 0.500
0.130
± 0.020
S
1.800
(TYP)
0.074
(TYP)
0° ~ 15°
20
25
mm
1.0 inch
NOTE
(MAX)
b1
θ°
15
0.5
A
L
0° ~ 15°
Version:A.001
5-Channel Secondary Monitoring IC
-8-
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC.
PS231S
Package Specification
( 18-pin SOP )
E
H
h x 45°
D
A
A1
B
θ
e
L
0
5
0.0
Symbol
Dimension in mm
MIN.
MAX.
0.2
2.36
2.64
0.093
0.104
0.1
0.3
0.004
0.012
11.35
11.76
0.447
E
7.39
7.59
0.291
H
1.27BSC
10.00
h
0.40
θ
0°
0.463
0.299
0.050BSC
10.64
0.394
0.51BSC
L
NOTE
0.016BSC
D
e
inch
MAX.
A
0.41BSC
mm
0.4
Dimension in inch
MIN.
A1
B
10
0.419
0.020BSC
1.27
0.016
0.050
8°
0°
8°
Version:A.001
5-Channel Secondary Monitoring IC
-9-
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC.
PS231S
The products listed herein are designed for ordinary electronic applications, such as
electrical appliances, audio-visual equipment, communications devices and so on.
Hence, it is advisable that the devices should not be used in medical instruments,
surgical implants, aerospace machinery, nuclear power control systems,
disaster/crime-prevention equipment and the like. Misusing those products may
directly or indirectly endanger human life, or cause injury and property loss.
Silicon Touch Technology, Inc. will not take any responsibilities regarding the
misusage of the products mentioned above. Anyone who purchases any products
described herein with the above-mentioned intention or with such misused
applications should accept full responsibility and indemnify. Silicon Touch Technology,
Inc. and its distributors and all their officers and employees shall defend jointly and
severally against any and all claims and litigation and all damages, cost and
expenses associated with such intention and manipulation.
Silicon Touch Technology, Inc. reserve the right to make changes to their products or
to discontinue any product or service without notice, and advise customers to obtain
the latest version of relevant information to verify, before placing orders, that
information being relied on is current and complete.
Version:A.001
5-Channel Secondary Monitoring IC
-10-