RP1H SINTERED GLASS JUNCTION FAST SWITCHING PLASTIC RECTIFIER VOLTAGE: 2000V CURRENT: 0.25A FEATURE DO-15\DO-204AC High temperature metallurgically bonded construction Sintered glass cavity free junction Capability of meeting environmental standard of MIL-S-19500 High temperature soldering guaranteed 350°C/10sec/0.375”lead length at 5 lbs tension Operate at Ta =55°C with no thermal run away Typical Ir<0.5µA MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL RP1H units Maximum Recurrent Peak Reverse Voltage Vrrm 2000 V Maximum RMS Voltage Vrms 1400 V Maximum DC blocking Voltage Vdc 2000 V Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load If(av) 0.25 A Ifsm 10.0 A Vf 6.0 V Ir(av) 100 µA Ir 10.0 300.0 µA Maximum Forward Voltage at 0.25A and 25°C Maximum full load reverse current full cycle Average at 55°C Ambient Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Maximum Reverse Recovery Time (Note 1) Trr 75 nS Typical Junction Capacitance (Note 2) Cj 5.0 pF Typical Thermal Resistance (Note 3) Rth(ja) 65.0 °C /W Tstg, Tj -65 to +175 °C Storage and Operating Junction Temperature Note: 1. 2. 3. 4. Rev.A1 Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. B oard Mounted www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES RP1H Rev.A1 www.gulfsemi.com