BYT56AGP THRU BYT56MGP SINTERED GLASS JUNCTION FAST SWITCHING PLASTIC RECTIFIER VOLTAGE:50 TO 1000V CURRENT: 3.0A FEATURE DO-201AD High temperature metallurgically bonded construction Sintered glass cavity free junction Capability of meeting environmental standard of MIL-S-19500 High temperature soldering guaranteed 350°C /10sec/0.375”lead length at 5 lbs tension Operate at Ta =55°C with no thermal run away Typical Ir<0.1µA MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25°C non-repetitive reverse avalanche energy (I(BR)R=0.4A) Maximum full load reverse current full cycle average at 55°C Ambient Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =150°C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Junction Temperature SYMBOL BYT56 AGP BYT56 BGP BYT56 DGP BYT56 GGP BYT56 JGP BYT56 KGP BYT56 MGP units Vrrm Vrms Vdc 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V If(av) 3.0 A Ifsm 125 A Vf 1.4 V ER 10 mJ Ir(av) 100 µA Ir 5.0 100 µA µA Trr Cj 100 60 nS pF R(ja) 20 Tstg, Tj -65 to +175 °C /W °C Note: 1.Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2.Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3.Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES BYT56AGP THRU BYT56MGP 1 1 Rev.A1 www.gulfsemi.com