SFH620A / SFH6206 Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input Features • Good CTR Linearity Depending on Forward Current • Isolation Test Voltage, 5300 VRMS • High Collector-emitter Voltage, VCEO = 70 V • Low Saturation Voltage • Fast Switching Times • Low CTR Degradation • Temperature Stable • Low Coupling Capacitance • • • • e3 End-Stackable, .100 "(2.54 mm) Spacing High Common-Mode Interference Immunity Lead (Pb)-free component Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 1 A/C 1 4 C C/A 2 3 E 1 i179080 The couplers are end-stackable with 2.54 mm lead spacing. Creepage and clearance distances of > 8.0 mm are achieved with option 6. This version complies with IEC 60950 (DIN VDE 0805) for reinforced insulation to an operation voltage of 400 VRMS or DC. Agency Approvals • • • • UL1577, File No. E52744 System Code J CSA 93751 BSI IEC60950 IEC60065 DIN EN 60747-5-2 (VDE0884) DIN EN 60747-5-5 pending Available with Option 1 Description The SFH620A (DIP) and SFH6206 (SMD) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 or SMD package. The coupling devices are designed for signal transmission between two electrically separated circuits. Document Number 83675 Rev. 1.6, 01-Dec-05 Order Information Part Remarks SFH620A-1 CTR 40 - 125 %, DIP-4 SFH620A-2 CTR 63 - 200 %, DIP-4 SFH620A-3 CTR 100 - 320 %, DIP-4 SFH6206-1 CTR 40 - 125 %, SMD-4 SFH6206-2 CTR 63 - 200 %, SMD-4 SFH6206-3 CTR 100 - 320 %, SMD-4 SFH620A-1-X006 CTR 40 - 125 %, DIP-4 mil (option 6) SFH620A-2-X006 CTR 63 - 200 %, DIP-4 mil (option 6) SFH620A-2-X007 CTR 63 - 200 %, SMD-4 (option 7) SFH620A-3-X006 CTR 100 - 320 %, DIP-4 mil (option 6) For additional information on the available options refer to Option Information. www.vishay.com 1 SFH620A / SFH6206 Vishay Semiconductors Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Rating for extended periods of the time can adversely affect reliability. Input Symbol Value Reverse voltage Parameter VR 6.0 V DC Forward current IF ± 60 mA IFSM ± 2.5 A Pdiss 100 mW Unit Surge forward current Test condition tp ≤ 10 μs Power dissipation Unit Output Symbol Value Collector-emitter voltage Parameter Test condition VCE 70 V Emitter-collector voltage VEC 7.0 V IC 50 mA IC 100 mA Pdiss 150 mW Symbol Value Unit VISO 5300 VRMS Collector current tp ≤ 1.0 ms Power dissipation Coupler Parameter Test condition Isolation test voltage between emitter and detector, refer to climate DIN 40046, part 2, Nov.74 Creepage ≥ 7.0 mm Clearance ≥ 7.0 mm Insulation thickness between emitter and detector ≥ 4.0 mm Comparative tracking index per DIN IEC 112/VDEO 303, part 1 175 Isolation resistance VIO = 500 V, Tamb = 25 °C RIO ≥ 1012 Ω RIO ≥ 1011 Ω Storage temperature range Tstg - 55 to + 150 °C Ambient temperature range Tamb - 55 to + 100 °C Tj 100 °C Tsld 260 °C VIO = 500 V, Tamb = 100 °C Junction temperature Soldering temperature www.vishay.com 2 max. 10 s. dip soldering distance to seating plane ≥ 1.5 mm Document Number 83675 Rev. 1.6, 01-Dec-05 SFH620A / SFH6206 Vishay Semiconductors Electrical Characteristics Tamb = 25 °C, unless otherwise specified Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Input Typ. Max Forward voltage Parameter IF = ± 60 mA Test condition VF 1.25 1.65 Capacitance VR = 0 V, f = 1.0 MHz CO 50 pF Rthja 750 °C/W Thermal resistance Symbol Min Unit V Output Parameter Collector-emitter capacitance Test condition VCE = 5.0 V, f = 1.0 MHz Thermal resistance Symbol Min Typ. Max Unit CCE 6.8 pF Rthja 500 °C/W Coupler Parameter Collector-emitter saturation voltage Test condition Part Typ. Max Unit VCEsat 0.25 0.4 V CC 0.2 SFH620A-1 SFH6206-1 ICEO 2.0 50 nA SFH620A-2 SFH6206-2 ICEO 2.0 50 nA SFH620A-3 SFH6206-3 ICEO 5.0 100 nA Typ. IF = 10 mA, IC = 2.5 mA Coupling capacitance Collector-emitter leakage current VCE = 10 V Symbol Min pF Note: Still air, coupler soldered to PCB or base Current Transfer Ratio Parameter IC/IF Test condition VCE = 5.0 V, IF = ± 10 mA VCE = 5.0 V, IF = ± 1.0 mA Document Number 83675 Rev. 1.6, 01-Dec-05 Part Symbol Min Max Unit SFH620A-1 SFH6206-1 CTR 40 125 % SFH620A-2 SFH6206-2 CTR 63 200 % SFH620A-3 SFH6206-3 CTR 100 320 % SFH620A-1 SFH6206-1 CTR 13 30 % SFH620A-2 SFH6206-2 CTR 22 45 % SFH620A-3 SFH6206-3 CTR 34 70 % www.vishay.com 3 SFH620A / SFH6206 Vishay Semiconductors IF RL = 75 Ω VCC = 5 V IC 47 Ω isfh620a_08 Figure 1. Switching Times Linear Operation (without saturation) Switching Characteristics Parameter Test condition Turn-on Time RL = 75 Ω, IF = 10 mA, VCC = 5.0 V Rise Time Turn-off Time Symbol Min Typ. Max Unit ton 3.0 μs RL = 75 Ω, IF = 10 mA, VCC = 5.0 V tr 2.0 μs RL = 75 Ω, IF = 10 mA, VCC = 5.0 V toff 2.3 μs Fall Time RL = 75 Ω, IF = 10 mA, VCC = 5.0 V tf 2.0 μs Cut-off frequency RL = 75 Ω, IF = 10 mA, VCC = 5.0 V fctr 250 kHz Typical Characteristics (Tamb = 25 °C unless otherwise specified) IF = 10 mA, VCE = 5.0 V isfh620a_01 isfh620a_02 Figure 2. Current Transfer Ratio (CTR) vs. Temperature www.vishay.com 4 Figure 3. Output Characteristics (typ.) Collector Current vs. Collector-Emitter Voltage Document Number 83675 Rev. 1.6, 01-Dec-05 SFH620A / SFH6206 Vishay Semiconductors isfh620a_06 isfh620a_03 Figure 4. Diode Forward Voltage (typ.) vs. Forward Current Figure 7. Permissible Power Dissipation vs. Ambient Temperature f = 1.0 MHz isfh620a_07 isfh620a_04 Figure 5. Transistor Capacitance (typ.) vs. Collector-Emitter Voltage Figure 8. Permissible Diode Forward Current vs. Ambient Temperature Pulse cycle D = parameter, isfh620a_05 Figure 6. Permissible Pulse Handling Capability Forward Current vs. Pulse Width Document Number 83675 Rev. 1.6, 01-Dec-05 www.vishay.com 5 SFH620A / SFH6206 Vishay Semiconductors Package Dimensions in Inches (mm) 2 1 pin one ID 0.255 (6.48) 0.268 (6.81) ISO Method A 3 4 0.179 (4.55) 0.190 (4.83) 0.031 (0.79) typ. 0.050 (1.27) typ. 0.030 (0.76) 0.045 (1.14) 0.300 (7.62) typ. 0.130 (3.30) 0.150 (3.81) 10° 4° typ. i178027 0.230 (5.84) 0.250 (6.35) 0.020 (0.508) 0.035 (0.89) 0.050 (1.27) 0.100 (2.54) 0.018 (0.46) 0.022 (0.56) 3° - 9° 0.110 (2.79) 0.130 (3.30) 0.008 (0.20) 0.012 (0.30) Package Dimensions in Inches (mm) SMD pin one ID 0.030 (0.76) 0.100 (2.54) R 0.010 (0.25) 0.070 (1.78) 0.255 (6.48) 0.268 (6.81) 0.315 (8.00) min 3 4 0.375 (9.52) 0.395 (10.03) 0.179 (4.55) 0.190 (4.83) 0.030 (0.76) 0.045 (1.14) 0.060 (1.52) 0.435 (11.05) 0.031 (0.79) typ. 0.296 (7.52) 0.312 (7.90) 10° 0.010 (0.25) typ. 0.130 (3.30) 0.150 (3.81) ISO Method A i178029_1 www.vishay.com 6 4° typ. 1.00 (2.54)typ. 0.050 (1.27) typ. 0.098 (0.249) 0.035 (0.102) Lead coplanarity 0.004 max. 0.315 (8.00) min. 0.020 (0.508) 0.040 (1.02) 3° - 7° Document Number 83675 Rev. 1.6, 01-Dec-05 SFH620A / SFH6206 Vishay Semiconductors Option 6 Option 7 0.407 (10.36) 0.391 (9.96) 0.307 (7.8) 0.291 (7.4) 0.300 (7.62) TYP. 0.028 (0.7) MIN. 0.180 (4.6) 0.160 (4.1) 0.315 (8.0) MIN. 0.014 (0.35) 0.010 (0.25) 0.400 (10.16) 0.430 (10.92) Document Number 83675 Rev. 1.6, 01-Dec-05 0.331 (8.4) MIN. 0.406 (10.3) MAX. www.vishay.com 7 SFH620A / SFH6206 Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 8 Document Number 83675 Rev. 1.6, 01-Dec-05 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1