ALUMINUM ELECTROLYTIC CAPACITORS SSG Series: Radial Micro Miniature Size, 105°C FEATURES • 105°C, 1000 hours assured. • Standard micro miniature size with 5mm height. SPECIFICATIONS Item Performance Operating Temperature Range -40° ~ + 105°C Capacitance Tolerance ± 20% (120Hz, 20°C) I = 0.01CV or 0.3 ( A) whichever is greater (after 2 minutes) Where, C = rated capacitance in F. V=rated DC working voltage in V. Leakage Current (at 20°C) Rated Voltage Dissipaton Factor Tan at 120 Hz, 20°C (max) Tan 4 6.3 10 16 25 35 50 0.35 0.25 0.20 0.17 0.15 0.13 0.10 Rated Voltage Low Temperature Characteristics (at 120Hz) Impedance Ratio 4 6.3 10 16 25 35 50 Z(-25°C) /Z(+20°C) 7 6 4 3 2 2 2 Z(-40°C) /Z(+20°C) 15 12 8 6 4 4 4 Test Time Capacitance Change Load Life Test 1000 Hrs 4 ~ 6.3V ± 30% 10 ~ 50V ± 250% Dissipation Factor Less than 200% of specifiec value Leakage Current Within specified values Test Time Capacitance Change Shelf Life Test ± 30% 10 ~ 50V ± 30% Dissipation Factor Less than 200% of specifiec value Within specified values 120 500 1K 10K up Under 33 0.75 1.00 1.15 1.34 1.50 47 to 220 0.80 1.00 1.08 1.20 1.30 85 100 Temperature (°C) Under 70 Multipliers 1.65 Ripple Current & Temperature Mutipliers The specification shall be satisfied when the capacitors are restored to 20°C after exposing them for 1000 hrs at 105°C without voltage applied. 60 (50) Cap. (mF) Ripple Current & Frequency Multipliers The specification shall be satisfied when the capacitors are restored to 20°C after rated voltage applied for 1000hrs at 105°C. 1000 Hrs 4 ~ 6.3V Leakage Current Freq. (Hz) Impedance ratio shall not exceed the values given in the table. 1.27 Standards 1.00 Satisfies Characteristic W of JIS C 5141 DIMENSIONS & PERMISSABLE RIPPLE CURRENT Dimension: D×L(mm); Ripple Current: mA/RMS at 120Hz 105°C VDC 4V (0G) 1 4x5 2 0.33 R33 4x5 2.8 0.47 R47 4x5 4 1 010 4x5 7 2.2 2R2 3.3 3R3 4.7 4R7 10 100 22 220 33 330 4x5 27 mA fD x L 50V (1H) R22 mA fD x L 35V (1V) 0.22 mA fD x L 25V (1E) mA mA fD x L 16V (1C) 4x5 0.10 mA fD x L 10V (1A) 0R1 Code fD x L 6.3V (0J) fD x L mF mA 4x5 8.7 4x5 10 4x5 11 4x5 12 4x5 13 4x5 14 4x5 15 4x5 17 5x5 20 4x5 14 4x5 23 5x5 27 5x5 27 6.3 x 5 31 6.3 x 5 46 4x5 21 5x5 27 5x5 30 6.3 x 5 42 6.3 x 5 46 5x5 30 5x5 34 6.3 x 5 40 6.3 x 5 52 6.3 x 5 52 6.3 x 5 48 6.3 x 5 58 47 470 4x5 34 5x5 36 6.3 x 5 43 100 101 5x5 50 6.3 x 5 56 6.3 x 5 70 220 221 6.3 x 5 74 LEAD SPACING AND DIAMETER D P d 3 4 5 6.3 1.0 1.5 2.0 2.5 0.4 0.45 1.0 0.50 PART NUMBER EXAMPLE SSG 0R1 M 1H SA 040 050 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1CE06 REV 2004.8.23