ALUMINUM ELECTROLYTIC CAPACITORS SS Series: Radial Micro-Miniature Size FEATURES • 85°C, 1000 hours assured. • Standard micro miniature size with 5mm height. SPECIFICATIONS Performance Item Operating Temperature Range ~40°C ~+85°C ±20% (120Hz, 20°C) Capacitance Tolerance Leakage Current (at 20°C) I = 0.01CV or 3 (µA) whichever is greater (after 2 minutes) Where, C = rated capacitance in µF, V = rated DC working voltage in V. Dissipation Factor Tan d at 120Hz, 20°C) Rated Voltage 4 6.3 10 16 25 35 50 Tan d (max) 0.35 0.25 0.20 0.17 0.15 0.13 0.10 4 7 15 6.3 10 4 16 25 2 8 6 4 35 2 4 50 3 Rated Voltage Low Temperature Characteristics (at 120Hz) Impendance Ratio 6 12 1000 hours Test Time Load Life Test at 20°C (after rated voltage is applied at 85°C for 2000/3000 hours) Capacitance Change Dissipation Factor Leakage Current Freq.(Hz) Cap.(mF) Ripple Current & Frequency Multipliers Shelf Life Test at 20°C after exposure to 85 for 1000 hours Less than 200% of specified value with no voltage Within specified value Within £± 20% of inital value 60 (50) 0.75 Under 33 47 to 220 0.80 Temperature (°C) Under 50 Multipliers 1.27 Ripple Current & Temperature Multipliers Impendance ratio shall not exceed the values given in this table. 2 4 1K 10K up 1.15 1.34 1.50 1.08 1.20 1.30 120 500 1.00 1.00 70 85 1.27 Standards Test Time 1000 hours Capacitance Change Within £± 20% of inital value Dissipation Factor Less than 200% of specified value Leakage Current Within specified value 1.00 Satisfies Characteristic W of JIS C 5141 DIMENSIONS & PERMISSABLE RIPPLE CURRENT Dimension: fD×L(mm); Ripple Current: mA/RMS at 120Hz 85°C VDC mF 0.1 0R1 0.22 R22 0.33 R33 0.47 R47 1 010 2.2 2R2 3.3 4.7 6.3V(0J) 4V(0G) fDxL Code mA mA fDxL 10V(1A) fDxL mA 16V(1C) fDxL mA 3R3 4x5 3x5 4R7 10 100 22 220 4x5 22 33 330 4x5 27 4x5 34 47 470 4x5 34 5x5 100 101 5x5 55 220 221 6.3 x 5 74 6.3 x 5 8x5 37 62 104 4x5 3x5 5x4 17 13 30 5x5 6.3 x 5 14 11 25V(1E) fDxL mA 35V(1V) fDxL mA 4x5 3x5 50V(1H) fDxL 4x5 3x5 4x5 3x5 4x5 3x5 4x5 3x5 4x5 3x5 mA 1 1 2 2 3 2.8 5 4 8.7 7 8.7 7 4x5 10 4x5 3x5 11 10 4x5 12 4x5 13 4x5 14 4x5 17 4x5 20 4x5 23 5x5 27 5x5 27 6.3 x 5 31 5x5 35 6.3 x 5 42 6.3 x 5 46 46 41 5x5 49 6.3 x 5 52 52 50 6.3 x 5 8x5 58 6.3 x 5 8x5 58 6.3 x 5 8x5 6.3 x 5 8x5 6.3 x 5 70 8x5 120 99 66 72 99 Note: 3mm diameter can has flat (non vented) rubber bung. Other unites have raised (vented) rubber bung. LEAD SPACING AND DIAMETER fD 3 4 5 P fd 1.0 1.5 2.0 0.4 6.3 a 0.45 1.0 b 0.5 8 2.5 PART NUMBER EXAMPLE SS 0R1 M 1H SA 040 050 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1CE05 REV 2004.7.2