ALUMINUM ELECTROLYTIC CAPACITORS SA Series: Radial, Miniature, Low Leakage Current, 105°C FEATURES • 105°C, 1000 hours assured, Low Leakage Current. • 7mm height. • Use in very compact high temperature industrial equipment. SPECIFICATIONS Item Performance -40°C ~ +105°C Operating Temperature Range Capacitance Tolerance ± 20% (120Hz, 20°C) I = 0.002CV or 0.4 (mA) whichever is greater (after 2 minutes) Where, C = rated capacitance in mF. V=rated DC working voltage in V. Leakage Current (at 20°C) Rated Voltage 4 6.3 10 16 25 35 50 63 Tan (max) 0.35 0.24 0.21 0.16 0.14 0.12 0.10 0.10 Dissipaton Factor Tan at 120 Hz, 20°C Impedance ratio shall not exceed the values given in the table below 4 6.3 10 16 25 35 50 63 Z(-25°C) /Z(+20°C) 6 4 3 3 2 2 2 2 Z(-40°C) /Z(+20°C) 12 10 6 6 4 4 4 3 Rated Voltage Low Temperature Characteristics (at 120Hz) Impedance Ratio Test Time Load Life Test Capacitance Change 1000 Hrs ± 20% Dissipation Factor Less than 200% of specified value Leakage Current Within specified value Test Time 500 Hrs Dissipation Factor Less than 200% of specified value Leakage Current Within specified value Freq. (Hz) 1K 10K up 1.20 1.30 1.45 1.10 1.15 1.20 70 85 105 1.65 1.27 1.0 60(50) 120 500 Under 33 0.70 1.00 47 to 220 0.80 1.00 Cap. mF Ripple Current & Frequency Multilpiers Temperature (°C) Under 50 Riple Current & Temperature Multipliers Multipliers The specification shall be satisfied when the capacitors are restored to 20°C after exposing them for 500 hrs at 105°C without voltage applied. ± 20% Capacitance Change Shelf Life Test The specification shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied for 1000 hrs at 105°C. 1.95 Standards Satisfies Characteristic W of JIS C 5141 DIMENSIONS & PERMISSABLE RIPPLE CURRENT Dimension: D×L(mm); Ripple Current: mA/RMS at 120Hz 85°C VDC 4V (0G) 10V (1A) fD x L 63V (1J) mA 3 4x7 3 0.22 R22 4x7 5 4x7 5 0.33 R33 4x7 6 4x7 6 0.47 R47 4x7 7 4x7 7 1 010 4x7 10 4x7 10 2.2 2R2 3.3 3R3 4.7 4R7 10 100 22 220 4x7 33 330 4x7 33 4x7 41 5x7 47 470 4x7 39 5x7 49 100 101 6.3 x 7 59 6.3 x 7 75 mA mA fD x L 50V (1H) 4x7 mA fD x L 35V (1V) 0R1 mA fD x L 25V (1E) fD x L mA fD x L 16V (1C) mA 0.10 fD x L 6.3V (0J) fD x L mF Code mA 4x7 16 5x7 19 4x7 18 4x7 20 6.3 x 7 29 6.3 x 7 36 4x7 19 5x7 21 6.3 x 7 24 8x7 40 4x7 27 5x7 29 6.3 x 7 32 36 4x7 40 6.3 x 7 44 6.3 x 7 49 44 5x7 55 6.3 x 7 55 8x7 67 6.3 x 7 54 6.3 x 7 62 8x7 74 8x7 90 LEAD SPACING AND DIAMETER D P d 4 5 6.3 8 1.5 2.0 2.5 3.5 0.45 0.5 1.0 0.5 PART NUMBER EXAMPLE SA 0R1 M 1H SA 040 070 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1CE04 REV 2004.8.24