PANDUIT D-104-00-ND

CUSTOMER DRAWING
Product
Name
D-104-00
L
max
29.75
(1.170)
Product Dimensions
øA
øB
min
min
10.80
11.65
(0.425)
(0.460)
øD
max
11.43
(0.450)
Cable Dimensions
øE
J±0.5
min
(J±0.02)
5.70
8
(0.225)
(0.315)
M±0.5
(M±0.02)
9
(0.355)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX:
TYPE ROL1 per ANSI-J-STD-004.
3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: natural.
APPLICATION
1. This part is designed to provide an environment protected shield termination on cables, rated for 125°C minimum, meeting the
dimensional criteria listed, having tin or silver plated copper shields.
2. Install using Tyco Electronics approved convection or infrared tools in accordance with Tyco Electronics assembly procedure
RCPS-100-70.
3. Assemblies will meet requirements of Tyco Electronics specification RT-1404 and National Aerospace Standard NAS-1747.
4. Temperature range: -55°C to +150°C.
For best results, prepare the cable as shown:
Tyco Electronics
300 Constitution Dr
Menlo Park, CA
94025, U.S.A.
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
DRAWN BY:
P.TALLY
ANGLES: N/A
ROUGHNESS
IN MICRON
CAGE CODE:
06090
Raychem
Devices
Tyco Electronics reserves the right to
amend this drawing at any time. Users
should evaluate the suitability of the
product for their application.
REPLACES:
ECO NUMBER:
D981826
TITLE:
SOLDERSLEEVE SHIELD TERMINATOR
DOCUMENT NO.:
D-104-00
REV:
DATE:
A
SCALE:
07-019646
If this document is printed it becomes uncontrolled. Check for the latest revision
© 2007 Tyco Electronics Corporation. All rights reserved
22-Aug-07
SIZE:
NTS
A
SHEET:
1 of 1