SPECIFICATION CONTROL DRAWING Product Revision Product Name S03-06-R C Ident. Code S0306R S03-07-R C S0307R S03-08-R C S0308R S03-09-R C S0309R S03-10-R C S0310R Component Dimensions øB øC L±1.75 min min (L±0.07) 16.50 1.90 2.65 (0.650) (0.070) (0.105) 16.50 2.65 3.68 (0.650) (0.105) (0.145) 16.50 4.30 5.08 (0.650) (0.170) (0.200) 19.10 5.95 6.45 (0.750) (0.235) (0.255) 19.10 7.00 7.60 (0.750) (0.275) (0.300) H min 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) Shall Accommodate with Cable Dimensions øE øF øD max min max 2.65 0.90 1.90 (0.105) (0.035) (0.075) 3.68 1.40 2.65 (0.145) (0.055) (0.105) 5.08 2.15 4.30 (0.200) (0.085) (0.170) 6.45 3.30 5.95 (0.255) (0.130) (0.235) 7.60 4.30 7.00 (0.300) (0.170) (0.275) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. THERMAL INDICATOR: Color change violet to colorless. 3. MELTABLE RINGS: Stabilized thermoplastic. Color - blue. 4. PRE-INSTALLED BRAID: Nickel plated copper strands. CMA 654. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 125°C minimum, meeting the dimensional criteria listed and having tin or silver plated shields and insulation compatible with the insert material. For compatible insulations, see MIL-S-83519/2 or consult Raychem. 2. When installed per Raychem process standard RCPS-100-70, assemblies will meet those requirements of Raychem Specification RT-1404 and MIL-S-83519/2 which do not require electrical testing while parts are immersed in water. 3. Temperature range: -55°C to +150°C. 4. Parts shall be marked with identification code per table. For best results, prepare the cable as shown: SOLDERSLEEVE is a trademark of Tyco Electronics Corporation Tyco Electronics Corporation 300 Constitution Drive, Menlo Park, CA. 94025, U.S.A. TITLE: Raychem DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A DRAWN BY: S03-06/-10-R Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their ROUGHNESS application. IN MICRON CAGE CODE: REPLACES: DCR NUMBER: ANGLES: N/A M. FORONDA 06090 D982099 SOLDERSLEEVE DEVICE SHIELD TERMINATION WITH BRAID D000418 If this document is printed it becomes uncontrolled. Check for the latest revision. © 2004 Tyco Electronics Corporation. All rights reserved PROD. REV.: DOC. ISSUE: DATE: SEE TABLE 3 21-Aug-00 SCALE: None SIZE: SHEET: A 1 of 1