MA-COM RNF-100-MINI-SPL-3/64-BK

RAYCHEM Tubing Products
1
SCL
Heat-shrinkable Tubing
Semirigid,
Encapsulant-Lined,
Polyolefin Tubing
Product Facts
3:1 shrink ratio
Splash-resistant, moistureresistant covering; not
intended for use where
immersion in fluids is
required
■ Rugged protection against
abrasion, vibration, and
flexing
■ Excellent strain relief and
insulation of weak points
■ RoHS compliant
■
■
Applications
Installation
Operating Temperature Range
Encapsulates components,
splices, and terminations
where moisture resistance
and mechanical protection
are required. Encapsulant
melts and flows to fill
surface irregularities of the
substrate. While still hot,
the tubing can be blocked
to form a wire breakout.
Minimum shrink
temperature: 125°C [257°F]
-55°C to 110°C
[-67°F to 230°F]
Minimum full recovery
temperature: 135°C [275°F]
Specifications/Approvals
Series
UL
Military
Raychem
SCL
E85381
600 V, 125°C
AMS-DTL-23053/4*, Class 1
RT-1301
*Formerly MIL-I-23053/4 and MIL-DTL-23053/4.
Available in:
Americas
Europe
Asia Pacific
■
■
■
1-109
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
SCL (Continued)
Product Dimensions
Size
Additional
Standard Color
1/8
3/16
1/4
3/8
1/2
3/4
1
Brown
Gray
White
Red
Blue
Yellow
N/A
Inside Diameter
Minimum
Maximum
Expanded
Recovered
After Heating
as Supplied
3.2 [0.125]
0.6 [0.023]
4.8 [0.187]
1.5 [0.060]
6.4 [0.250]
2.0 [0.080]
9.5 [0.375]
3.4 [0.135]
12.7 [0.500]
5.0 [0.195]
19.1 [0.750]
8.0 [0.313]
25.4 [1.000]
10.2 [0.400]
Recovered Wall Thickness**
Meltable Wall
Total Wall
After Heating
After Heating
(Nominal)
0.96 ± 0.15 [0.038 ± 0.006]
0.51 [0.020]
1.09 ± 0.15 [0.043 ± 0.006]
0.64 [0.025]
1.19 ± 0.15 [0.047 ± 0.006]
0.69 [0.027]
1.27 ± 0.18 [0.050 ± 0.007]
0.76 [0.030]
1.39 ± 0.18 [0.055 ± 0.007]
0.89 [0.035]
1.65 ± 0.18 [0.065 ± 0.007]
1.02 [0.040]
1.90 ± 0.18 [0.075 ± 0.007]
1.02 [0.040]
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering Information
Color
Standard
Black (-0) for all sizes, plus one additional color per size per
Product Dimensions table.
Size selection
Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
Standard packaging
In 1.2-meter [4-foot] lengths.
Ordering description*** Specify product name, size and color (for example, SCL 1/4-0).
***Europe only. For supply to MIL spec., Def Stan and BS add -MS, -DS or -BS to ordering description.
1-110
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
1
SCT
Heat-shrinkable Tubing
Flame-Retardant,
Adhesive-Lined, Semirigid
Polyolefin Tubing (Extended
Temperature Range)
Product Facts
4:1 shrink ratio allows a few
sizes to cover a wide range
of splice and component
diameters
■ Flame-retardant and
mechanically tough, the
tubing provides strain relief
and abrasion protection of
wire splices, terminals, and
other components
■ Thick adhesive liner forms
an effective barrier against
fluids and moisture and
performs well at an
extended temperature range
■ RoHS compliant
■
Specifications/Approvals
Applications
Installation
Operating Temperature Range
Specially designed to
insulate and seal
automotive wire splices
and components in an
under-the-hood automotive
environment. Specially
formulated to function at
an extended temperature
range.
Minimum shrink
temperature: 110°C [230°F]
-40°C to 150°C
[-40°F to 302°F]
Minimum full recovery
temperature: 135°C [266°F]
Series
Raychem
SCT
SCT SCD
Available in:
Americas
Europe
Asia Pacific
■
■
■
1-111
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
SCT (Continued)
Product Dimensions
Part
Number
SCT No. 1
SCT No. 2
SCT No. 3
SCT No. 4
Inside Diameter
Minimum
Maximum
Expanded
Recovered
After Heating
as Supplied
7.6 [0.300]
1.7 [0.065]
9.0 [0.355]
2.3 [0.090]
11.6 [0.455]
2.5 [0.100]
17.8 [0.700]
4.4 [0.175]
Recovered Wall Thickness*
Meltable Wall
Total Wall
After Heating
After Heating
(Nominal)
1.52 ± 0.30 [0.060 ± 0 .012]
0.76 [0.030]
1.52 ± 0.30 [0.060 ± 0 .012]
0.76 [0.030]
2.29 ± 0.30 [0.090 ± 0.012]
1.40 [0.055]
2.54 ± 0.30 [0.100 ± 0.012]
1.52 [0.060]
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering Information
Color
Size selection
Standard packaging
Marking
Ordering description
Black
Always order the largest size that will shrink snugly over the component being covered.
Special order sizes are available upon request.
Cut pieces.
Tubing will be printed with its numbered size (such as SCT-1, SCT-2, SCT-3, SCT-4).
Specify product name, numbered size, color and cut length
(for example, SCT-NO.3-E3-0-75MM).
1-112
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
1
SFR
Heat-shrinkable Tubing
Very Flexible,
Flame-Retardant,
Silicone Elastomer
Tubing
Product Facts
Outstanding low-temperature
flexibility
■ Resistance to hydraulic fluids,
fuel, and lubricating oil
■ Very good ablative
characteristics: when
exposed to flame, surface
turns to insulative char or
“ablates”
■ RoHS compliant
■
Specifications/Approvals
Applications
Installation
Operating Temperature Range
Provides cable jacketing,
harness protection, and
strain relief for electronic
components, semiconductor leads, and
wire splices. Suitable for
applications that require
flexibility over a wide range
of operating temperatures.
Minimum shrink
temperature: 135°C [285°F]
-75°C to 180°C
[-103°F to 356°F]
Minimum full recovery
temperature: 175°C [347°F]
Series
Military
Raychem
SFR
AMS-DTL-23053/10*
MIL-PRF-46846, Type II, Class 1
RT-1140
*Formerly MIL-I-23053/10 and MIL-DTL-23053/10.
Available in:
Americas
Europe
Asia Pacific
■
■
■
1-113
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
SFR (Continued)
Product Dimensions
Size
1/4
3/8
1/2
5/8
3/4
7/8
1
1 1/4
1 1/2
1 3/4
2
Inside Diameter
Minimum Expanded
Maximum Recovered
as Supplied
After Heating
6.4 [0.250]
3.6 [0.143]
9.5 [0.375]
5.4 [0.214]
12.7 [0.500]
7.3 [0.286]
15.9 [0.625]
9.1 [0.357]
19.1 [0.750]
10.9 [0.428]
22.2 [0.875]
12.7 [0.500]
25.4 [1.000]
14.5 [0.570]
31.8 [1.250]
18.1 [0.714]
38.1 [1.500]
21.8 [0.857]
44.5 [1.750]
25.4 [1.000]
50.8 [2.000]
29.0 [1.140]
Recovered Wall Thickness**
After Heating
0.88 ± 0.25 [0.035 ± 0.010]
1.02 ± 0.25 [0.040 ± 0.010]
1.21 ± 0.38 [0.048 ± 0.015]
1.32 ± 0.38 [0.052 ± 0.015]
1.44 ± 0.38 [0.057 ± 0.015]
1.65 ± 0.38 [0.065 ± 0.015]
1.77 ± 0.51 [0.070 ± 0.020]
2.21 ± 0.51 [0.087 ± 0.020]
2.41 ± 0.51 [0.095 ± 0.020]
2.71 ± 0.51 [0.107 ± 0.020]
2.79 ± 0.51 [0.110 ± 0.020]
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering Information
Color
Size selection
Standard
Black (-0)
Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
Standard packaging
On spools.
Ordering description*** Specify product name, size and color (for example, SFR 1/4-0).
***Europe only. For supply to MIL spec., Def Stan and BS add -MS, -DS or -BS to ordering description.
1-114
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
1
SRFR
Heat-shrinkable Tubing
Highly Flexible, Silicone
Rubber Tubing
Product Facts
Highly flame-retardant
■ Extremely flexible at high
and low temperatures
■ Shrink ratio 1.5:1 minimum
except sizes 4/2.9 and 29/20
■ RoHS compliant
■
Applications
Highly flexible and
resistant to high and low
temperatures. Unlike other
silicone materials, SRFR
displays outstanding
physical strength. It resists
extreme heat shocks, and
exhibits good thermal
insulation. SRFR is nonburning and has
outstanding ablative
properties as well as
excellent physical and
Specifications/Approvals
electrical properties. SRFR
is used in medical
equipment where its key
properties are outstanding
flexibility and ability to
withstand exposure to
sterilization conditions.
Other applications include
thyristor power cable
insulation, heating element
and bus bar insulation, fiber
optic bundle sheathing,
and rocketry support cable
protection.
Installation
Minimum shrink
temperature: 135°C [275°F]
Minimum full recovery
temperature: 175°C [347°F]
Operating Temperature Range
-75°C to 200°C
[-103°F to 392°F]
Series
UL
Raychem
SRFR
E85381 VW-1
600V, 200°C
RT-1142
RW-2057
Available in:
Americas
Europe
Asia Pacific
■
■
■
1-115
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
SRFR (Continued)
Product Dimensions
Size
2.9/1.7
4/2.9
7.8/4.6
10/6.5
15/9.6
21/13
29/20
41/27
51/33
Inside Diameter
Minimum Expanded
Maximum Recovered
as Supplied
After Heating
2.9 [0.114]
1.7 [0.067]
4.0 [0.158]
2.9 [0.114]
7.8 [0.307]
4.6 [0.181]
10.0 [0.394]
6.5 [0.256]
15.0 [0.591]
9.6 [0.378]
21.0 [0.827]
13.0 [0.512]
29.0 [1.142]
20.0 [0.787]
41.0 [1.614]
27.0 [1.063]
51.0 [2.008]
33.0 [1.299]
Recovered Wall Thickness*
After Heating
1.0 ± 0.50 [0.039 ± 0.020]
1.0 ± 0.50 [0.039 ± 0.020]
1.0 ± 0.50 [0.039 ± 0.020]
1.5 ± 0.50 [0.059 ± 0.020]
1.5 ± 0.50 [0.059 ± 0.020]
2.0 ± 0.75 [0.079 ± 0.030]
2.0 ± 0.75 [0.079 ± 0.030]
3.0 ± 1.00 [0.118 ± 0.039]
3.0 ± 1.00 [0.118 ± 0.039]
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering Information
Color
Size selection
Standard packaging
Ordering description
Standard
Gray (-8)
Always order the largest size that will shrink snugly over the component to be covered.
On spools.
Specify product name, size and color (for example, SRFR 2.9/1.7-8).
1-116
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
1
SST/SST-FR
Heat-shrinkable Tubing
Self-Sealing,
Heat-Shrinkable Tubing
Product Facts
Thick adhesive liner forms
an effective barrier against
fluids and moisture
■ Thick-wall insulation,
strain relief and abrasion
protection
■ No need for greases, tape,
or epoxy
■ Expansion ratios as high as
3:1
■ Available in flame-retardant
material
■ SST has the following
agency approvals:
- ABS (American Bureau of
Shipping)
- Lloyd’s (Lloyd’s Register of
Shipping)
■ RoHS compliant
■
Applications
SST provides a simple,
positive splice-sealing
method that offers
protection under adverse
environmental conditions.
Tubing supplied with
standard sealant provides
water sealing and environmental protection in wet or
underground applications.
The thermoplastic adhesive
not only seals, but also
provides mechanical strain
Specifications/Approvals
relief. The polymer tubing
has excellent insulating,
abrasion-resistance, and
strain-relief properties.
Installation
Minimum shrink
temperature: 90°C [195°F]
Minimum full recovery
temperature: 121°C [250°F]
Operating Temperature Range
-55°C to 110°C
[-67°F to 230°F]
Series
Military
Industry
Agency
Raychem
SST
SST-FR
—
AMS-DTL-23053/15*,
Classes 1 and 2
—
ASTM D 685, nonburning
ABS, Lloyd’s
RW-2011
RW-2011
*Formerly MIL-I-23053/I5 and MIL-DTL-23053/15.
Available in:
Americas
Europe
Asia Pacific
■
■
■
1-117
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
SST/SST-FR (Continued)
Product Dimensions
Size†
SST*-03
SST*-04
SST*-07
SST*-11
SST*-13
SST*-15
SST*-17
SST*-20
SST*-27
SST*-30
SST*-40
SST*-45
Standard
Nominal
Length
30**, 48
30**, 48
48
48
48
48
48
48
48
48
48
48
Inside Diameter
Minimum
Maximum
Expanded
Recovered
as Supplied After Heating
0.300
0.100
0.400
0.150
0.750
0.220
1.100
0.375
1.300
0.375
1.500
0.500
1.700
0.500
2.000
0.750
2.700
0.900
3.000
1.250
4.000
1.750
4.500
1.750
Wall Thickness
Recommended
Nominal Wall
Cable
Expanded
After
Range for
Heating††
600-Volt Cable
0.025
0.070
18 through 14 AWG
0.025
0.070
14 through 10 AWG
0.030
0.095
8 through 1 AWG
0.040
0.120
2 through 4/0 AWG
0.035
0.120
2 through 4/0 AWG
0.050
0.140
2/0 AWG through 500 MCM
0.045
0.140
2/0 AWG through 500 MCM
0.050
0.160 350 MCM through 1000 MCM
0.050
0.160 500 MCM through 1250 MCM
0.050
0.160 900 MCM through 1500 MCM
0.050
0.160 1500 MCM through 2500 MCM
0.050
0.160 1500 MCM through 2500 MCM
†In place of asterisk* substitute length of tubing to be ordered. For example, SST*-11, as the second column indicates, comes
in 48-inch lengths, so a 48-inch cut piece of SST tubing would be SST 48-11.
††Wall thickness will be less if tubing recovery is restricted during shrinkage.
**30-inch length standard for /226 coating only.
Ordering Information
Color
Size selection
Standard packaging
Ordering description
Part Numbering System
Standard
Black
Nonstandard
White, Red, Yellow and Clear (Clear is non-flame-retardant)
Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
See Product Dimensions table.
Specify product name, cut length, size and color (for example, SST 48-07/FR/97).
SST - _ - _ / _ / _ / _ / _
“NM” - no marking
Color
Black/leave blank (standard)
White/WHT
Red/RED
Yellow/YLW
Clear/CL (non-flame retardant)
Adhesive/sealant
/97 standard with FR
/226 standard with Non FR
“FR” - flame-retardant
Size
Length in inches (48 inch max)
Family
Example: SST-48-07/FR/97/NM
1-118
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
1
TAT-125
Heat-shrinkable Tubing
Adhesive-Lined,
Flexible,
Polyolefin Tubing
Product Facts
2:1 shrink ratio
Thin adhesive lining that
bonds to outer tubing and
surface below, forming a
positive environmental seal
■ Flexibility of both tubing and
adhesive
■ Moisture seal that is
resistant to bending of the
substrate
■ Good mechanical strength
and cut-through resistance
■ Adhesive that bonds to a
wide variety of plastics,
rubbers, and metals,
including polyethylene,
neoprene, lead, and steel
■ RoHS compliant
■
■
Applications
Installation
Operating Temperature Range
Seals and protects simple
in-line splices, bimetallic
joints, and components
from fluids, moisture, and
corrosion. Repairs
damaged wire insulation,
especially where flexibility
is required. Provides onestep electrical insulation
and moisture sealing.
Minimum shrink
temperature: 95°C [203°F]
-55°C to 110°C
[-67°F to 230°F]
Minimum full recovery
temperature: 121°C [250°F]
Specifications/Approvals
Series
UL*
Military
Raychem
TAT-125 Type 1 (colors)
E85381
600 V, 125°C
—
AMS-DTL-23053/4*, Class 2
RW-3032
—
RW-3032
TAT-125 Type 2 (clear)
*Formerly MIL-I-23053/4 and MIL-DTL-23053/4. Sizes 1/4" through 1 1/2" only.
Available in:
Americas
Europe
■
Asia Pacific
■
1-119
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
TAT-125 (Continued)
Product Dimensions
Inside Diameter
Maximum
Minimum
Expanded
Recovered
After Heating
as Supplied
3.2 [0.125]
1.6 [0.062]
4.8 [0.187]
2.4 [0.093]
6.4 [0.250]
3.2 [0.125]
9.5 [0.375]
4.8 [0.187]
12.7 [0.500]
6.4 [0.250]
19.1 [0.750]
9.5 [0.375]
25.4 [1.000]
12.7 [0.500]
38.1 [1.500]
19.1 [0.750]
Size
1/8
3/16
1/4
3/8
1/2
3/4
1
1 1/2
Recovered Wall Thickness**
Total Wall
Adhesive Wall
After Heating
After Heating
(Nominal)
(Nominal)
0.69 [0.027]
0.23 [0.009]
0.71 [0.028]
0.25 [0.010]
0.74 [0.029]
0.13 [0.005]
0.74 [0.029]
0.13 [0.005]
0.76 [0.030]
0.15 [0.006]
0.89 [0.035]
0.15 [0.006]
1.07 [0.042]
0.20 [0.008]
1.19 [0.047]
0.28 [0.011]
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering Information
Color
Standard
Nonstandard
Size selection
Standard packaging
Ordering description
Black (-0)
White (-9), red (-2), blue (-6), yellow (-4), green (-5), brown (-1),
orange (-3), violet (-7), gray (-8), clear (-X , not flame-retardant)
Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
In 1.2-meter [4-foot] lengths.
Specify product name, size and color (for example, TAT-125 1/4-0).
1-120
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
1
TC Caps
Heat-shrinkable Tubing
Semirigid, FlameRetardant Polyolefin Caps
Product Facts
2.5:1 shrink ratio
■ Flame-retardant
■ Permanent or temporary
method to terminate wires
■ Rapid, simple installation
■ Rugged protection against
abrasion, vibration, and
flexing
■ RoHS compliant
■
Specifications/Approvals
Applications
Installation
Operating Temperature Range
Widely used for wire terminations because of their
light weight, small size and
durability. Vibration-proof
caps are used to insulate
and terminate dead-end
electrical cables, fixtures,
connectors, and other electrical equipment. Also used
to protect the ends of wire
during storage.
Minimum shrink
temperature: 110°C [230°F]
-55°C to 135°C
[-67°F to 275°F]
Minimum full recovery
temperature: 135°C [275°F]
Series
UL
Raychem
TC Caps
E85381
600 V, 125°C
TC Caps SCD
Available in:
Americas
Europe
Asia Pacific
■
■
■
1-121
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
TC Caps (Continued)
Product Dimensions
Length
Nominal Minimum Open
Overall as
Barrel after
Recovery*
Supplied
White (-9) 19.1 (0.750) 10.2 (0.400)
Red (-2) 25.4 (1.000) 14.0 (0.550)
Gray (-8) 28.6 (1.125) 14.0 (0.550)
Color
Size
TC 4001
TC 4003
TC 4005
Inside Diameter
Recovered Wall Thickness**
After Heating
Minimum
Maximum
Expanded
Recovered
as Supplied After Heating
1.6 (0.063)
0.8 (0.030)
0.51 ± 0.12 (0.020 ± 0.005)
3.2 (0.125)
1.3 (0.050)
0.64 ± 0.12 (0.025 ± 0.005)
6.4 (0.250)
2.5 (0.100)
0.69 ± 0.12 (0.027 ± 0.005)
*See glossary for definition of “barrel”.
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering Information
Color
Size selection
Standard packaging
Ordering description
Standard
One color per size per the Product Dimensions table.
Always order the largest size that will shrink snugly over the component to be covered.
In pieces.
Specify product name, size and color (for example, TC-CAPS-4003-2).
1-122
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
1
TFE and TFER
Heat-shrinkable Tubing
High-Temperature,
Chemically Inert, Modified
Tubing made of PTFE
Product Facts
Shrink ratio: 1.8:1 (TFE)
3.2:1 (TFER)
■ High flame-resistance
■ Excellent chemical
resistance
■ RoHS compliant
■
Specifications/Approvals
Applications
Installation
Operating Temperature Range
Designed to provide
insulation and mechanical
protection in severe
chemical and thermal
environments. Used to
cover hydraulic hose and
couplings to prevent
contamination and
corrosion. The high
mechanical strength and
extremely low coefficient
of friction make it good for
reducing damage to
bearing shafts and similar
applications.
Minimum shrink
temperature: 330°C [625°F]
-67°C to 250°C
[-88.6°F to 482°F]
Minimum full recovery
temperature: 340°C [644°F]
Series
Military
Raychem
TFE, TFER
AMS-DTL-23053/12*, Classes 3 and 5
Def. Stan. 59-97 Type 5A (TFE)
Def. Stan. 59-97 Type 5B (TFER)
RW-2055 (TFE)
RW-2054 (TFER)
*Formerly MIL-I-23053/12 and MIL-DTL-23053/12.
Available in:
Americas
Europe
Asia Pacific
■
■
1-123
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
TFE and TFER (Continued)
Product Dimensions
TFE
Size
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
0
Inside Diameter
Minimum Expanded
Maximum Recovered
as Supplied
After Heating
0.8 [0.032]
0.38 [0.015]
0.9 [0.035]
0.46 [0.018]
1.1 [0.043]
0.56 [0.022]
1.2 [0.047]
0.68 [0.027]
1.4 [0.055]
0.81 [0.032]
1.5 [0.059]
0.99 [0.039]
1.9 [0.075]
1.24 [0.049]
2.3 [0.091]
1.55 [0.061]
3.0 [0.118]
1.83 [0.072]
3.8 [0.150]
2.26 [0.089]
4.8 [0.189]
2.84 [0.112]
6.1 [0.240]
3.58 [0.141]
7.6 [0.299]
4.52 [0.178]
9.4 [0.370]
5.69 [0.224]
10.9 [0.429]
7.06 [0.278]
11.9 [0.469]
8.81 [0.347]
Wall Thickness**
Nominal Recovered
After Heating
0.23 [0.009]
0.23 [0.009]
0.25 [0.010]
0.25 [0.010]
0.30 [0.012]
0.30 [0.012]
0.30 [0.012]
0.30 [0.012]
0.30 [0.012]
0.30 [0.012]
0.30 [0.012]
0.38 [0.015]
0.38 [0.015]
0.38 [0.015]
0.38 [0.015]
0.38 [0.015]
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
TFER
Size
5/64
1/8
1/4
3/8
1/2
5/8
3/4
1
1-1/4
Inside Diameter
Minimum Expanded
Maximum Recovered
After Heating
as Supplied
2.0 [0.079]
0.6 [0.024]
3.2 [0.126]
1.0 [0.039]
6.4 [0.252]
1.6 [0.063]
9.5 [0.374]
2.4 [0.095]
12.7 [0.500]
3.7 [0.146]
15.9 [0.626]
4.5 [0.177]
19.0 [0.748]
5.7 [0.224]
25.4 [1.000]
7.1 [0.230]
32.0 [1.260]
8.8 [0.347]
Wall Thickness**
Nominal Recovered
After Heating
0.23 [0.009]
0.25 [0.010]
0.30 [0.012]
0.30 [0.012]
0.38 [0.015]
0.38 [0.015]
0.38 [0.015]
0.38 [0.015]
0.38 [0.015]
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering Information
Color
Size selection
Standard
Clear (-X)
Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
Standard packaging
In 1.2-meter [4-foot] lengths.
Ordering description*** Specify product name, size and color (for example,TFE 22-X).
***Europe only. For supply to MIL spec., Def Stan and BS add -MS, -DS or -BS to ordering description.
1-124
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
1
Tubing Kits and Mini-Spools
Heat-shrinkable Tubing
Smaller Packaging Options
for Single Wall and
Adhesive-Lined Tubing
Products
Product Facts
VERSAFIT and RNF-100
tubing: 2:1 shrink ratio
■ DWP-125: 3:1 shrink ratio
■ ES1000: 4:1 shrink ratio
■ VERSAFIT tubing’s low full
recovery temperature
reduces installation time
and the risk of damage to
temperature-sensitive
components
■ RNF-100 offers excellent
physical, chemical, and
electrical properties that
meet or exceed commercial,
industrial and military
standards for highly
reliable, general purpose
tubing
■ DWP-125 and ES1000 have
high-shrink-ratios to allow
for insulation and sealing of
irregular shapes; few sizes
cover a wide range of
diameters
■ RoHS compliant
■
Applications
Single wall VERSAFIT and
RNF-100 tubing provide
electrical insulation and
strain relief of in-line components, electrical connections, wire terminations, and
splices. They can be used
to bundle wires for flexible
light duty harnesses. Also
to identify or color code
wires, cables, terminals and
electronic components.
Adhesive-lined DWP-125
and ES1000 environmentally seal and protect a
wide variety of electrical
applications, including wire
splices, terminations, breakouts and connector-tocable transitions.
Operating Temperature Range
VERSAFIT and RNF-100:
-55°C to 135°C
[-67°F to 275°F]
DWP-125:
-40°C to 110°C
[-40°F to 230°F]
Installation
Minimum full recovery
temperature:
ES1000:
-40°C to 130°C
[-40°F to 266°F]
VERSAFIT: 90°C [194°F]
RNF-100: 121°C [250°F]
DWP-125: 125°C [257°F]
ES1000: 135°C [275°F]
Specifications/Approvals
Series
UL
CSA
VERSAFIT
E35586 VW-1
600 V, 125°C
E35586
600 V, 125°C
E35586
600 V, 125°C
E85381
600 V, 125°C
LR31929 VW-1
600 V, 125°C
LR31929
600 V, 125°C
RW-3009
—
DWP-125 SCD
—
RT-1113
RNF-100
DWP-125
ES1000
Available in:
Americas
Raychem
®
Europe
■
RT-350
Asia Pacific
■
1-125
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
Tubing Kits and Mini-Spools (Continued)
Single Wall Tubing
KIT 1 – 2 to 1 Shrink Ratio •
Black • 600V, 125°C,
UL/CSA VW-1
(KIT 1 PN: A55251-000)
KIT 2 – 2 to 1 Shrink Ratio •
7 Colors** • 600V, 125°C,
UL/CSA VW-1 (except clear)
(KIT 2 PN: D54859-000)
Expanded I.D.
VERSAFIT-3/16”
VERSAFIT-1/4”
VERSAFIT-3/8”
VERSAFIT-1/2”
VERSAFIT-3/4”
VERSAFIT-1”
Quantity (6 Inch Pieces)
30
28
24
20
14
10
Fits Wire Gauge Size
18 – 14 AWG
12 – 10 AWG
8 AWG
6 –3 AWG
2 – 1/0 AWG
2/0 – 4/0 AWG
Refill Part Number
D76139-000
F37063-000
D27573-000
C02462-000
A92664-000
C21270-000
Expanded I.D.
VERSAFIT-3/32”
VERSAFIT-1/8”
VERSAFIT-3/16”
VERSAFIT-1/4”
VERSAFIT-3/8”
VERSAFIT-1/2”
Quantity (6 Inch Pieces)
35
28
21
21
14
14
Fits Wire Gauge Size
18 AWG
16 AWG
14 AWG
12 – 10 AWG
8 AWG
6 – 3 AWG
Refill Part Number
E31091-000
349256-000
C53800-000
C87605-000
A82691-000
E10896-000
**Clear tubing in Kit 2 and Kit 2 Refills is RNF-100.
Adhesive-Lined Tubing
KIT 3 – Black/White/Red/Clear
• 600V, 125°C, UL
(KIT 3 PN: E42160-000)
Expanded I.D.
DWP-125-1/8”
DWP-125-3/16”
DWP-125-1/4”
DWP-125-1/2”
DWP-125-3/4”
DWP-125-1”
ES1000-NO.1
ES1000-NO.2
ES1000-NO.3
ES1000-NO.4
Quantity (6 Inch Pieces)
25
25
24
10
5
3
6
5
5
3
Fits Wire Gauge Size
20 – 16 AWG (3 to 1 Shrink Ratio)
14 –10 AWG (3 to 1 Shrink Ratio)
12 –10 AWG (3 to 1 Shrink Ratio)
6 –3 AWG
(3 to 1 Shrink Ratio)
2 – 1/0 AWG (3 to 1 Shrink Ratio)
2/0 – 4/0 AWG (3 to 1 Shrink Ratio)
16 – 12 AWG (4 to 1 Shrink Ratio)
12 – 10 AWG (4 to 1 Shrink Ratio)
10 – 8 AWG
(4 to 1 Shrink Ratio)
6 –3 AWG
(4 to 1 Shrink Ratio)
Refill Part Number
D14889-000
E87367-000
F91864-000
F41454-000
C67617-000
F66623-000
KITS 1, 2 and 3 are comprised of a durable six section plastic box with hinged lid. Inside the lid are product selection
guidelines. Ask your Sales Representative about KIT 4 and KIT 6, our Economy Tubing Kits in a reclosable plastic
bag, also used on “point of sale” racks. Here are Part Numbers for those Kits and their content:
KIT 4: E32151-000 (Three pieces each of 3/16”, 1/4”, 3/8”, 1/2”, 3/4” and 1” Black tubing in 6 inch pieces)
KIT 6: C72402-000 (Three pieces each of 3/64”, 1/16”, 3/32” and 1/8” Black tubing in 6 inch pieces)
VERSAFIT MINI-SPOOLS
2 to 1 Shrink Ratio • Black •
600V, 125°C, UL/CSA VW-1
Expanded I.D.
VERSAFIT-3/64”
VERSAFIT-1/16”
VERSAFIT-3/32
VERSAFIT-1/8”
VERSAFIT-3/16”
VERSAFIT-1/4”
VERSAFIT-3/8”
VERSAFIT-1/2”
VERSAFIT-3/4”
VERSAFIT-1”
Quantity (Feet)
100
75
65
60
50
40
35
30
25
15
Part Number
C16404-000
E40870-000
D70981-000
C17600-000
F27135-000
F64479-000
D57591-000
E37316-000
449582-000
F27156-000
VERSAFIT is a very flexible, highly flame-retardant polyolefin tubing, 90°C full recovery temperature, good fluid
resistance with a UL 224/CSA VW-1 flammability rating.
RNF-100 MINI-SPOOLS
2 to 1 Shrink Ratio • Black •
600V, 125°C, UL/CSA
Expanded I.D.
RNF-100-3/64”
RNF-100-1/16”
RNF-100-3/32
RNF-100-1/8”
RNF-100-3/16”
RNF-100-1/4”
RNF-100-3/8”
RNF-100-1/2”
RNF-100-3/4”
RNF-100-1”
Quantity (Feet)
100
75
65
60
50
40
35
30
25
15
Part Number
D00409-000
A66551-000
D42391-000
F56629-000
E77288-000
F75818-000
D12330-000
A81736-000
E40866-000
E62131-000
RNF-100 is a flexible, flame-retardant polyolefin tubing, 121°C full recovery temperature, excellent fluid resistance
with a UL 224/CSA All Tubing flammability rating.
1-126
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
1
TUGA-GP
Heat-shrinkable Tubing
Shiny, Non-FlameRetardant, Polyolefin Tubing
Product Facts
2:1 shrink ratio
■ Can be easily hot-stamped
■ Bright, shiny surface
■ Semiflexible, non-flameretardant, halogen-free
■ Conforms to substrates more
uniformly and with less
longitudinal change than most
PVC-based materials
■ RoHS compliant
■
Specifications/Approvals
Applications
Installation
Operating Temperature Range
TUGA-GP is a commercial
grade tubing for general
applications where a
flame-retardant product is
not needed but where
electrical insulation and
mechanical performance
are important. TUGA-GP
makes an attractive covering for many automotive,
appliance, and consumergoods applications.
Minimum shrink
temperature: 85°C [85°F]
-55°C to 125°C
[-67°F to 257°F]
Minimum full recovery
temperature:
110°C [230°F]
Series
Raychem
TUGA-GP
RW-2201
Available in:
Americas
Europe
Asia Pacific
■
1-127
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
TUGA-GP (Continued)
Product Dimensions
Size
1.2/0.6
1.6/0.8
2.4/1.2
3/1.5
5/2.5
6.4/32
8/4
9.5/4.8
11/5.5
12.7/6.4
15/7.5
20/10
25.4/12.7
38/19
Inside Diameter
Minimum Expanded
Maximum Recovered
as Supplied
After Heating
1.2 [0.046]
0.6 [0.023]
1.6 [0.062]
0.8 [0.031]
2.4 [0.093]
1.2 [0.046]
3.0 [0.118]
1.5 [0.059]
5.0 [0.197]
2.5 [0.098]
6.4 [0.250]
3.2 [0.125]
8.0 [0.315]
4.0 [0.157]
9.5 [0.375]
4.8 [0.187]
11.0 [0.433]
5.5 [0.217]
12.7 [0.500]
6.4 [0.250]
15.0 [0.591]
7.5 [0.295]
20.0 [0.787]
10.0 [0.394]
25.4 [1.000]
12.7 [0.500]
38.0 [1.496]
19.0 [0.748]
Wall Thickness*
Nominal
After Heating
0.4 [0.016]
0.4 [0.016]
0.5 [0.019]
0.5 [0.019]
0.5 [0.019]
0.6 [0.024]
0.6 [0.024]
0.6 [0.024]
0.6 [0.024]
0.6 [0.024]
0.8 [0.031]
0.8 [0.031]
0.9 [0.035]
1.0 [0.039]
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering Information
Color
Size selection
Standard packaging
Ordering description
Standard
Black (-0)
Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes available upon request.
On spools.
Specify product name, size and color (for example, TUGA 3/1.5-0).
1-128
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
1
URHT
Heat-shrinkable Tubing
Ultra-High-Ratio, FlameRetardant, Polyolefin HeatShrinkable Tubing
Product Facts
Shrink ratios as high as 8:1
Specially formulated for
thick wall insulation, strain
relief and abrasion
protection
■ Flame-retardant passing
ASTM D 635
■ Excellent performance in
both hot and cold
environments
■ Optional factory applied
adhesive provides watertight
environmental sealing in
wet and corrosive locations
■ RoHS compliant
■
■
Applications
Ultra-high-shrink-ratio, heatshrinkable tubing, with
expansion ratios as high as
8-to-1, is designed to conform to odd shapes and
shrink over large transitions,
allowing for the repair and
sealing of cable connectors
and equipment. Cable
harnesses can be repaired
and released without
disassembly. This product
can be used to seal the
back end of a connector or
Specifications/Approvals
simply repair a damaged
outer insulation of a cable
or wire.
URHT tubing is available
with or without a hot melt
adhesive lining.
Installation
Minimum shrink
temperature: 135°C [275°F]
Minimum full recovery
temperature: 150°C [302°F]
Operating Temperature Range
-55°C to 135°C
[-67°F to 275°F]
Series
Military
Raychem
URHT
SAE-AS81765/1, Type II*
URHT SCD
*heat-shrinkable, crosslinked, flexible polyolefin
Available in:
Americas
Europe
Asia Pacific
■
■
■
1-129
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
URHT (Continued)
Product Dimensions
URHT-200
Inside Diameter
Maximum
Minimum
Expanded
Recovered
After Heating
as Supplied
50.80 (2.000)
5.84 (0.230)
URHT-300
76.20 (3.000)
Size
Ordering Information
Part Numbering System
Color
Size selection
Standard packaging
Ordering description
8.64 (0.340)
Wall Thickness
Nominal
Recovered
After Heating
3.56 (0.140)
3.56 (0.140)
Unrestricted Full
Recovered Length
± 6.35 (.250)
7.62, 101.60, 152.40, 254.00
(3, 4, 6, 10)
7.62, 101.60, 152.40, 254.00
(3, 4, 6, 10)
Standard
Black (-0)
Always order the largest size that will shrink snugly over the component to be covered.
In pieces.
Specify product name, size, cut length and color (for example, URHT-200-10-0).
URHT - _ / _ / _
42 = Std Adhesive
86 = High Performance Adhesive
Unrestricted recovered length
Expanded inside diameter - as supplied
1-130
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
1
Versafit
Heat-shrinkable Tubing
Highly Flame-Retardant,
Very Flexible, Low-ShrinkTemperature, Polyolefin
Tubing
Product Facts
2:1 shrink ratio
Low shrink temperature
reduces installation time
and the risk of damage to
temperature-sensitive
components
■ Very flexible; doesn’t easily
wrinkle when bent
■ Highly flame-retardant
■ Hot stamps extremely well
■ Higher temperature rating,
better thermal stability, and
higher resistance to physical
abuse than noncrosslinked
materials
■ Free of polybrominated
biphenyls (PBBs) and
polybrominated biphenyl
oxides and ethers (PBBOs
and PBBEs), which are
classified as environmentally
hazardous substances
■ RoHS compliant
■
■
Applications
Installation
Operating Temperature Range
Cost-effective choice for
many commercial and
military applications;
electrically insulates
and protects in-line
components, disconnect
terminals, and splices.
Bundles wires for very
flexible light-duty
harnesses. Strain-relieves
electrical wire connections
for commercial applications. Identifies or colorcodes wires, cables,
terminals, and components.
Minimum shrink
temperature: 70°C [158°F]
-55°C to 135°C
[-67°F to 275°F]
Minimum full recovery
temperature: 90°C [194°F]
Specifications/Approvals
Series
UL
CSA
Versafit
E35586 VW-1
600 V, 125°C
LR31929 VW-1
600 V, 125°C
®
Military
Raychem
AMS-DTL-23053/5*
Classes 1 & 3
RW-3009
*Formerly MIL-I-23053/5 and MIL-DTL-23053/5.
Available in:
Americas
Europe
Asia Pacific
■
■
■
1-131
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
Versafit (Continued)
Product Dimensions
Inside Diameter
Expanded
Maximum Recovered
as Supplied
After Heating
1.63 ± 0.2 [0.064 ± 0.008]
0.6 [0.023]
3/64
1.85 ± 0.2 [0.073 ± 0.008]
0.8 [0.031]
1/16
3/32
2.79 ± 0.2 [0.110 ± 0.008]
1.2 [0.046]
3.43 ± 0.2 [0.135 ± 0.008]
1.6 [0.062]
1/8
5.21 ± 0.3 [0.205 ± 0.010]
2.4 [0.093]
3/16
1/4
7.11 ± 0.3 [0.280 ± 0.010]
3.2 [0.125]
3/8
10.16 ± 0.4 [0.400 ± 0.015]
4.8 [0.187]
13.72 ± 0.4 [0.540 ± 0.015]
6.4 [0.250]
1/2
16.90 ± 0.4 [0.665 ± 0.015]
8.0 [0.315]
5/8***
3/4
20.45 ± 0.4 [0.805 ± 0.015]
9.5 [0.375]
1
26.80 ± 0.4 [1.055 ± 0.015]
12.7 [0.500]
33.40 ± 0.7 [1.315 ± 0.025]
15.9 [0.625]
1 1/4***
1 1/2
39.88 ± 0.8 [1.570 ± 0.030]
19.1 [0.750]
2
52.83 ± 1.0 [2.080 ± 0.040]
25.4 [1.000]
78.49 ± 1.0 [3.090 ± 0.040]
38.1 [1.500]
3
104.14 ± 1.3 [4.100 ± 0.050]
50.8 [2.000]
4
Size
Recovered Wall Thickness**
After Heating
0.40 ± 0.08 [0.016 ± 0.003]
0.43 ± 0.08 [0.017 ± 0.003]
0.51 ± 0.08 [0.020 ± 0.003]
0.51 ± 0.08 [0.020 ± 0.003]
0.51 ± 0.08 [0.020 ± 0.003]
0.64 ± 0.08 [0.025 ± 0.003]
0.64 ± 0.08 [0.025 ± 0.003]
0.64 ± 0.08 [0.025 ± 0.003]
0.76 ± 0.08 [0.030 ± 0.003]
0.76 ± 0.08 [0.030 ± 0.003]
0.89 ± 0.12 [0.035 ± 0.005]
1.02 ± 0.15 [0.040 ± 0.006]
1.02 ± 0.15 [0.040 ± 0.006]
1.14 ± 0.16 [0.045 ± 0.007]
1.27 ± 0.20 [0.050 ± 0.008]
1.40 ± 0.23 [0.055 ± 0.009]
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
***Nonstandard size; available by special order only.
Ordering Information
Color
Standard
Black (-0), white (-9), red (-2), blue (-6), yellow (-4)
Nonstandard
Brown (-1), orange (-3), green (-5), violet (-7), gray (-8)
Size selection
Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
Standard packaging**** On spools.
Ordering description***** Specify product name, size and color (for example, Versafit 1/4-0).
****Available in the convenient Mini-Spool packaging/dispensing system, for sizes 3/64” up to 1” (black only).
*****Europe only. For supply to MIL, Def Stan and BS add -MS, -DS or -BS to ordering description.
1-132
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
1
Versafit-3X
Heat-shrinkable Tubing
Very Flexible, High-ShrinkRatio, Highly FlameRetardant, Low-ShrinkTemperature, Polyolefin
Tubing
Product Facts
Highly flame-retardant
3:1 shrink ratio easily
accommodates irregular
shapes; few sizes cover a
wide range of diameters
■ Low shrink temperature
reduces installation time
and the risk of damage to
temperature-sensitive
components
■ Free of polybrominated
biphenyls (PBBs) and
polybrominated biphenyl
oxides and ethers (PBBOs
and PBBEs) which are
classified as environmentally
hazardous substances
■ RoHS compliant
■
■
Specifications/Approvals
Applications
Installation
Operating Temperature Range
Provides electrical insulation and strain relief of
in-line components,
electrical connections, wire
terminations, and splices.
Bundles wires for flexible
light duty harnesses.
Identifies or color codes
wires, cables, terminals and
electrical and electronic
components.
Minimum shrink
temperature: 70°C [158°F]
-55°C to 135°C
[-67°F to 275°F]
Minimum full recovery
temperature: 90°C [194°F]
Series
UL
CSA
Versafit-3X
E35586 VW-1
600 V, 125°C
LR31929 VW-1
600 V, 125°C
Americas
Europe
Asia Pacific
■
■
■
Available in:
Raychem
®
RW-3009
1-133
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
Versafit-3X (Continued)
Product Dimensions
Size
1/8
1/4
3/8
1/2
3/4
1
Inside Diameter
Minimum Expanded
Maximum Recovered
as Supplied
After Heating
3.2 (0.125)
1.1 (0.042)
6.4 (0.250)
2.2 (0.083)
9.5 (0.375)
3.2 (0.125)
12.7 (0.500)
4.3 (0.166)
19.1 (0.750)
6.4 (0.250)
25.4 (1.000)
8.5 (0.333)
Recovered Wall Thickness*
After
Heating
0.58 ± 0.08 (0.023 ± 0.003)
0.58 ± 0.08 (0.023 ± 0.003)
0.61 ± 0.08 (0.024 ± 0.003)
0.61 ± 0.08 (0.024 ± 0.003)
0.61 ± 0.08 (0.024 ± 0.003)
0.64 ± 0.08 (0.025 ± 0.003)
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering Information
Color
Standard
Nonstandard
Size selection
Standard packaging
Ordering description
Black (-0)
White (-9), red (-2), blue (-6), yellow (-4), green (-5), brown (-1),
orange (-3), violet (-7), gray (-8)
Always order the largest size that will shrink snugly over the component to be covered.
On spools.
Specify product name, size and color (for example, Versafit-3X-1/4-0).
1-134
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
1
Versafit V2
Heat-shrinkable Tubing
Highly Flame-Retardant,
Very Flexible, Low-ShrinkTemperature, Polyolefin
Tubing
Product Facts
2:1 shrink ratio
Low shrink temperature
reduces installation time
and the risk of damage to
temperature-sensitive
components
■ Very flexible; doesn’t easily
wrinkle when bent
■ Highly flame-retardant
■ Hot stamps extremely well
■ Higher temperature rating,
better thermal stability, and
higher resistance to physical
abuse than noncrosslinked
materials
■ Free of polybrominated
biphenyls (PBBs) and
polybrominated biphenyl
oxides and ethers (PBBOs
and PBBEs), which are
classified as environmentally
hazardous substances
■ RoHS compliant
■
■
Specifications/Approvals
Applications
Installation
Operating Temperature Range
Cost-effective choice
for many commercial
applications; electrically
insulates and protects
in-line components,
disconnect terminals, and
splices. Bundles wires for
very flexible light-duty
harnesses. Strain-relieves
electrical wire connections.
Identifies or color-codes
wires, cables, terminals,
and components.
Minimum shrink
temperature: 70°C [158°F]
-30°C to 125°C
[-22°F to 257°F]
Minimum full recovery
temperature: 90°C [194°F]
Series
UL
CSA
Versafit V2
E35586 VW-1
600 V, 125°C
LR31929 VW-1
600 V, 125°C
Americas
Europe
Asia Pacific
■
■
■
Available in:
Raychem
®
RW-3023
1-135
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
Versafit V2 (Continued)
Product Dimensions
Size
1.0
1.5
2.0
2.5
3.0
3.5
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
18.0
20.0
22.0
25.0
27.0
28.0
30.0
Inside Diameter
Maximum
Expanded
as Supplied
Recovered
After Heating
1.5 ± 0.2 [0.059 ± 0.008]
0.50 [0.020]
2.1 ± 0.2 [0.075 ± 0.008]
0.75 [0.030]
2.6 ± 0.2 [0.102 ± 0.008]
1.00 [0.039]
3.1 ± 0.2 [0.122 ± 0.008]
1.25 [0.049]
3.6 ± 0.2 [0.142 ± 0.008]
1.50 [0.059]
4.1 ± 0.3 [0.161 ± 0.012]
1.75 [0.069]
4.6 ± 0.3 [0.181 ± 0.012]
2.00 [0.079]
5.6 ± 0.3 [0.221 ± 0.012]
2.50 [0.098]
6.6 ± 0.3 [0.260 ± 0.012]
3.00 [0.118]
7.6 ± 0.3 [0.299 ± 0.012]
3.50 [0.138]
8.6 ± 0.3 [0.339 ± 0.012]
4.00 [0.158]
9.6 ± 0.3 [0.378 ± 0.012]
4.50 [0.177]
10.4 ± 0.3 [0.409 ± 0.012]
5.00 [0.197]
11.4 ± 0.3 [0.449 ± 0.012]
5.50 [0.217]
12.7 ± 0.3 [0.500 ± 0.012]
6.00 [0.236]
13.5 ± 0.3 [0.532 ± 0.012]
6.50 [0.256]
14.4 ± 0.4 [0.567 ± 0.016]
7.00 [0.276]
15.7 ± 0.4 [0.618 ± 0.016]
7.50 [0.295]
16.9 ± 0.4 [0.665 ± 0.016]
8.00 [0.315]
19.0 ± 0.4 [0.748 ± 0.016]
9.00 [0.354]
21.4 ± 0.4 [0.843 ± 0.016]
10.00 [0.394]
23.2 ± 0.4 [0.913 ± 0.016]
11.00 [0.433]
26.8 ± 0.4 [1.055 ± 0.016]
12.50 [0.492]
28.2 ± 0.5 [1.110 ± 0.020]
12.50 [0.492]
30.0 ± 0.5 [1.181 ± 0.020]
14.00 [0.551]
32.1 ± 0.5 [1.264 ± 0.020]
15.00 [0.591]
Wall Thickness
Expanded as
Recovered*
Supplied
After Heating
(Nominal)
(Minimum)
0.20 [0.008]
0.33 [0.013]
0.20 [0.008]
0.35 [0.014]
0.25 [0.010]
0.43 [0.017]
0.25 [0.010]
0.43 [0.017]
0.25 [0.010]
0.43 [0.017]
0.25 [0.010]
0.43 [0.017]
0.25 [0.010]
0.43 [0.017]
0.30 [0.012]
0.56 [0.022]
0.30 [0.012]
0.56 [0.022]
0.30 [0.012]
0.56 [0.022]
0.30 [0.012]
0.56 [0.022]
0.30 [0.012]
0.56 [0.022]
0.30 [0.012]
0.56 [0.022]
0.30 [0.012]
0.56 [0.022]
0.30 [0.012]
0.56 [0.022]
0.35 [0.014]
0.66 [0.026]
0.35 [0.014]
0.68 [0.027]
0.35 [0.014]
0.68 [0.027]
0.35 [0.014]
0.68 [0.027]
0.40 [0.016]
0.76 [0.030]
0.40 [0.016]
0.76 [0.030]
0.45 [0.018]
0.89 [0.035]
0.45 [0.018]
0.89 [0.035]
0.45 [0.018]
0.89 [0.035]
0.45 [0.018]
0.89 [0.035]
0.45 [0.018]
0.89 [0.035]
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering Information
Color
Standard
Nonstandard
Size selection
Standard packaging
Ordering description
Black (-0)
White (-9), red (-2), blue (-6), yellow (-4), green (-5), orange (-3),
violet (-7), brown (-1), gray (-8)
Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
On spools.
Specify product name, size and color (for example, V2-3.0-0).
1-136
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
1
Versafit V4
Heat-shrinkable Tubing
Very-Thin-Wall, Very
Flexible, Highly
Flame-Retardant,
Polyolefin Tubing
Product Facts
2:1 shrink ratio
Very thin wall provides
space savings and rapid
shrinking
■ Low shrink temperature
further reduces installation
time and risk of damage to
temperature-sensitive
components
■ Very flexible; doesn’t easily
wrinkle when bent
■ Free of polybrominated
biphenyls (PBBs) and
polybrominated biphenyl
oxides and ethers (PBBOs
and PBBEs), which are
classified as
environmentally
hazardous substances
■ RoHS compliant
■
■
Specifications/Approvals
Applications
Installation
Operating Temperature Range
Typically used where
space saving is important.
Offers the ability to pack
components more closely
than is possible with
standard tubings. Costeffective choice for many
commercial applications;
electrically insulates and
protects in-line components, disconnect terminals,
and splices. Used for strain
relief on high-density
connectors.
Minimum shrink
temperature: 70°C [158°F]
-30°C to 125°C
[-22°F to 257°F]
Minimum full recovery
temperature: 90°C [194°F]
Series
UL
CSA
Versafit V4
E85381 VW-1
300 V, 125°C
LR31929 VW-1
150 V, 125°C
Americas
Europe
Asia Pacific
■
■
■
Available in:
Raychem
®
RW-3023
1-137
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
Versafit V4 (Continued)
Product Dimensions
Size
0.6
0.8
1.0
1.5
2.0
2.5
3.0
3.5
4.0
5.0
6.0
7.0
8.0
9.0
10.0
Inch
Size
3/64
1/16
3/32
1/8
3/16
1/4
3/8
1/2
3/4
1
Inside Diameter
Maximum
Expanded
as Supplied
Recovered
After Heating
0.95 ± 0.25 [0.037 ± 0.010]
0.30 [0.012]
1.20 ± 0.25 [0.047 ± 0.010]
0.40 [0.016]
1.40 ± 0.25 [0.055 ± 0.010]
0.50 [0.020]
1.90 ± 0.25 [0.075 ± 0.010]
0.75 [0.030]
2.30 ± 0.25 [0.091 ± 0.010]
1.00 [0.039]
2.80 ± 0.25 [0.110 ± 0.010]
1.25 [0.049]
3.30 ± 0.25 [0.130 ± 0.010]
1.50 [0.059]
3.80 ± 0.25 [0.150 ± 0.010]
1.75 [0.069]
4.40 ± 0.25 [0.173 ± 0.010]
2.00 [0.079]
5.50 ± 0.25 [0.217 ± 0.010]
2.50 [0.098]
6.50 ± 0.40 [0.256 ± 0.016]
3.00 [0.118]
7.50 ± 0.40 [0.295 ± 0.016]
3.50 [0.138]
8.50 ± 0.40 [0.335 ± 0.016]
4.00 [0.158]
9.50 ± 0.40 [0.374 ± 0.016]
4.50 [0.177]
10.50 ± 0.50 [0.413 ± 0.020]
5.00 [0.197]
Inside Diameter
Minimum Expanded
Maximum Recovered
as Supplied
After Heating
1.2 [0.046]
0.6 [0.023]
1.6 [0.062]
0.8 [0.031]
2.4 [0.093]
1.2 [0.046]
3.2 [0.125]
1.6 [0.062]
4.8 [0.187]
2.4 [0.093]
6.4 [0.250]
3.2 [0.125]
9.5 [0.375]
4.8 [0.187]
12.7 [0.500]
6.4 [0.250]
19.1 [0.750]
9.5 [0.375]
25.4 [1.000]
12.7 [0.500]
Wall Thickness
Expanded as
Recovered*
Supplied
After Heating
(Nominal)
(Minimum)
0.10 [0.004]
0.25 [0.010]
0.10 [0.004]
0.25 [0.010]
0.10 [0.004]
0.25 [0.010]
0.10 [0.004]
0.25 [0.010]
0.10 [0.004]
0.25 [0.010]
0.15 [0.006]
0.25 [0.010]
0.15 [0.006]
0.25 [0.010]
0.15 [0.006]
0.25 [0.010]
0.15 [0.006]
0.25 [0.010]
0.15 [0.006]
0.25 [0.010]
0.15 [0.006]
0.28 [0.011]
0.15 [0.006]
0.28 [0.011]
0.15 [0.006]
0.28 [0.011]
0.15 [0.006]
0.28 [0.011]
0.15 [0.006]
0.28 [0.011]
Recovered Wall Thickness*
After
Heating
0.30 ± 0.05 [0.012 ± 0.002]
0.30 ± 0.05 [0.012 ± 0.002]
0.30 ± 0.05 [0.012 ± 0.002]
0.33 ± 0.05 [0.013 ± 0.002]
0.33 ± 0.05 [0.013 ± 0.002]
0.36 ± 0.08 [0.014 ± 0.003]
0.36 ± 0.08 [0.014 ± 0.003]
0.36 ± 0.08 [0.014 ± 0.003]
0.43 ± 0.08 [0.017 ± 0.003]
0.51 ± 0.08 [0.020 ± 0.003]
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering Information
Color
Size selection
Standard packaging
Marking
Ordering description
Standard
Black (-0)
Nonstandard
Other colors available upon request.
Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
On spools.
Marked with UL/CSA/-F- legends (metric sizes) or unmarked (inch sizes).
Specify product name, size (mm or in.) and color (for example, V4-1.0-0).
1-138
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
1
Versaflex
Heat-shrinkable Tubing
Expandable, Braided,
Polyester Sleeving
Product Facts
Excellent abrasion and cutthrough resistance
■ Lightweight
■ Flexible (even at low
temperatures)
■ Fungus proof
■ Not affected by most
chemical and solvents,
non-hygroscopic
■ Versaflex-FR sleeving
meets UL VW-1 and is selfextinguishing
■ Wide range of sizes
available
■ RoHS compliant
■
Applications
Versaflex sleeving is suited
for the mechanical protection of wire harnesses,
hoses, and all other applications where exceptional
flexibility combined with
superior abrasion/cut resistance is required. It also
serves as an economical
Specifications/Approvals
means for wire bundling
that will not trap heat or
moisture; expanding easily
to fit over irregular shapes,
then contracting to conform
and grip. To prevent
fraying, these products
should be cut to length
using a hot knife.
Installation
This product is cold
applied.
Operating Temperature Range
-50°C to 150°C
[-58°F to 302°F]
(220°C [-58°F to 302°F] for
short periods)
Series
UL
Raychem
Versaflex-FR
Versaflex
E306976 VW-1, 125°C
—
RK-6772
Available in:
Americas
Europe
Asia Pacific
■
■
1-139
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
Versaflex (Continued)
Product Dimensions
Versaflex (metric)
Size Range
Minimum
1 (0.039)
2 (0.079)
3 (0.118)
4 (0.158)
5 (0.197)
7 (0.276)
8 (0.315)
10 (0.394)
14 (0.551)
18 (0.709)
20 (0.787)
30 (1.181)
40 (1.575)
Nominal Size
3 (0.118)
4 (0.158)
5 (0.197)
6 (0.236)
8 (0.315)
10 (0.394)
12 (0.472)
15 (0.591)
20 (0.787)
25 (0.984)
30 (1.181)
40 (1.575)
50 (1.969)
Ordering Information
Maximum
5 (0.197)
7 (0.276)
9 (0.354)
12 (0.472)
12 (0.472)
15 (0.591)
17 (0.669)
20 (0.787)
26 (1.024)
34 (1.339)
40 (1.575)
50 (1.969)
60 (2.362)
Size
1/8
1/4
3/8
1/2
3/4
1-1/4
1-3/4
2
Versaflex (Imperial)
Nominal Size
Size Range
3 (0.118)
2.4 – 6.4 (0.094 – 0.252)
6 (0.236)
3.2 – 9.5 (0.125 – 0.375)
10 (0.394)
4.7 – 16 (0.185 – 0.630)
13 (0.512)
6.4 – 19 (0.252 – 0.748)
19 (0.748)
13 – 32 (0.512 – 1.260)
32 (1.256)
19 – 45 (0.748 – 1.772)
45 (1.772)
32 – 70 (1.260 – 2.756)
51 (2.008)
38 – 76 (1.496 – 2.992)
Size
1/8
1/4
3/8
1/2
3/4
1-1/4
1-3/4
2
Versaflex-FR flame retardant, expandable polyester braid
Nominal Size
Size Range
3 (0.118)
2.4 – 6.4 (0.094 – 0.252)
6 (0.236)
3.2 – 9.5 (0.125 – 0.375)
10 (0.394)
4.7 – 16 (0.185 – 0.630)
13 (0.512)
6.4 – 19 (0.252 – 0.748)
19 (0.748)
13 – 32 (0.512 – 1.260)
32 (1.256)
19 – 45 (0.748 – 1.772)
45 (1.772)
32 – 70 (1.260 – 2.756)
51 (2.008)
38 – 76 (1.496 – 2.992)
Color
Standard
Versaflex (metric) : Black (-0) Grey (-8)
Versaflex (imperial) : Black (-0)
Versaflex-FR : Black with a white X tracer (-09)
Standard packaging
Ordering description
On spools.
Specify product name, size and color (for example, VERSAFLEX-FR-1/4-09-SP)
1-140
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
1
XFFR
Heat-shrinkable Tubing
Halogen-Free,
Flame-Retardant,
Heat-Shrinkable Tubing
Product Facts
Emits minimal amounts of
toxic or acid gasses during
combustion
■ Meets performance
requirements of
MIL-C-24640 and
MIL-C-24643 cable jackets
■ Resists moisture, fungus,
and weathering
■ Available in expansion
ratios as high as 3:1
■ XFFR has the following
approvals:
- ABS (American Bureau of
Shipping)
- Lloyd’s (Lloyd’s Register of
Shipping)
■ RoHS compliant
■
Specifications/Approvals
Applications
Installation
Operating Temperature Range
XFFR halogen-free tubing
can be used for rejacketing
and repairing halogen-free
cables in any enclosed area
where a flame-retardant,
halogen-free environment is
required. These environments
include tunnels, buildings,
mass transit vehicles, and
ships. When installed with
S-1305 tape, the tubing can
also be used in applications requiring water sealing and protection from
abrasion and corrosion.
Minimum shrink
temperature: 70°C [158°F]
-55°C to 110°C
[-67°F to 230°F]
Minimum full recovery
temperature: 121°C [250°F]
Series
Military
Industry
Raychem
XFFR
MIL-C-24640
MIL-C-24643
NES 713
NES 711
RW-2016
Available in:
Americas
Europe
Asia Pacific
■
■
■
1-141
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
XFFR (Continued)
Product Dimensions
Size
XFFR-03
XFFR-04
XFFR-07
XFFR-11
XFFR-15
XFFR-20
XFFR-30
Inside Diameter
Minimum Expanded
Maximum Recovered
as Supplied
After Heating
7.62 [0.300]
2.54 [0.100]
10.16 [0.400]
3.81 [0.150]
19.05 [0.750]
5.59 [0.220]
27.94 [1.100]
9.52 [0.375]
38.10 [1.500]
12.70 [0.500]
50.80 [2.000]
19.05 [0.750]
76.20 [3.000]
31.75 [1.250]
Recovered Wall Thickness*
After Heating
(Nominal)
2.03 [0.080]
2.03 [0.080]
2.03 [0.080]
2.67 [0.105]
3.05 [0.120]
3.05 [0.120]
4.06 [0.160]
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering Information
Part Numbering System
Color
Size selection
Standard packaging
Standard
Black (-0)
Always order the largest size that will shrink snugly over the component to be covered.
1.2-meter [4-foot] or 7.5-meter [25-foot] lengths.
XFFR - 03 X 4 / NM
“NM” - no mark
Length in feet (4 feet standard)
Size
Family
1-142
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
1
ZH2
Heat-shrinkable Tubing
Flexible, Highly FlameRetardant, Low Recovery
Temperature, ZEROHAL
Polyolefin Tubing
Product Facts
2:1 shrink ratio
Highly flame-retardant;
UL/CSA VW-1 flammability
rating
■ Environmentally friendly
tubing essentially free of
halogens
■ Emits minimal amounts of
toxic or acid gasses when
burned
■ RoHS compliant
■
■
Specifications/Approvals
Applications
Installation
Operating Temperature Range
Electrical insulation and
strain relief of connections
and terminations in computers, appliances, and other
commercial electronic
products. Jacketing and
bundling of light duty harnesses in rail and mass
transit vehicles, buildings,
and other enclosed areas
where emission of toxic
gasses from burning materials containing halogens is
very undesirable.
Minimum shrink
temperature: 70°C [158°F]
-30°C to 125°C
[-22°F to 257°F]
Minimum full recovery
temperature: 90°C [194°F]
Series
UL
CSA
ZH2
E35586 VW-1
600 V, 125°C
LR31929 VW-1
600 V, 125°C
Americas
Europe
Asia Pacific
■
■
■
Available in:
Raychem
®
RW-3036
1-143
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
ZH2 (Continued)
Product Dimensions
Size
0.8
1.0
1.5
2.0
2.5
3.0
3.5
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
18.0
20.0
22.0
25.0
27.0
28.0
30.0
Inside Diameter
Maximum
Expanded
as Supplied
Recovered
After Heating
1.2 ± 0.2 [0.047 ± 0.008]
0.40 [0.016]
1.5 ± 0.2 [0.059 ± 0.008]
0.50 [0.020]
2.1 ± 0.2 [0.075 ± 0.008]
0.75 [0.030]
2.6 ± 0.2 [0.102 ± 0.008]
1.00 [0.039]
3.1 ± 0.2 [0.122 ± 0.008]
1.25 [0.049]
3.6 ± 0.2 [0.142 ± 0.008]
1.50 [0.059]
4.1 ± 0.3 [0.161 ± 0.012]
1.75 [0.069]
4.6 ± 0.3 [0.181 ± 0.012]
2.00 [0.079]
5.6 ± 0.3 [0.221 ± 0.012]
2.50 [0.098]
6.6 ± 0.3 [0.260 ± 0.012]
3.00 [0.118]
7.6 ± 0.3 [0.299 ± 0.012]
3.50 [0.138]
8.6 ± 0.3 [0.339 ± 0.012]
4.00 [0.158]
9.6 ± 0.3 [0.378 ± 0.012]
4.50 [0.177]
10.4 ± 0.3 [0.409 ± 0.012]
5.00 [0.197]
11.4 ± 0.3 [0.449 ± 0.012]
5.50 [0.217]
12.7 ± 0.3 [0.500 ± 0.012]
6.00 [0.236]
13.5 ± 0.3 [0.532 ± 0.012]
6.50 [0.256]
14.4 ± 0.4 [0.567 ± 0.016]
7.00 [0.276]
15.7 ± 0.4 [0.618 ± 0.016]
7.50 [0.295]
16.9 ± 0.4 [0.665 ± 0.016]
8.00 [0.315]
19.0 ± 0.4 [0.748 ± 0.016]
9.00 [0.354]
21.4 ± 0.4 [0.843 ± 0.016]
10.00 [0.394]
23.2 ± 0.4 [0.913 ± 0.016]
11.00 [0.433]
26.8 ± 0.4 [1.055 ± 0.016]
12.50 [0.452]
28.2 ± 0.5 [1.110 ± 0.020]
12.50 [0.452]
30.0 ± 0.5 [1.181 ± 0.020]
14.00 [0.551]
32.1 ± 0.5 [1.264 ± 0.020]
15.00 [0.591]
Wall Thickness
Expanded as
Recovered*
Supplied
After Heating
(Nominal)
(Minimum)
0.20 [0.008]
0.33 [0.013]
0.20 [0.008]
0.33 [0.013]
0.20 [0.008]
0.34 [0.013]
0.25 [0.010]
0.43 [0.017]
0.25 [0.010]
0.43 [0.017]
0.25 [0.010]
0.43 [0.017]
0.25 [0.010]
0.43 [0.017]
0.25 [0.010]
0.43 [0.017]
0.30 [0.012]
0.56 [0.022]
0.30 [0.012]
0.56 [0.022]
0.30 [0.012]
0.56 [0.022]
0.30 [0.012]
0.56 [0.022]
0.30 [0.012]
0.56 [0.022]
0.30 [0.012]
0.56 [0.022]
0.30 [0.012]
0.56 [0.022]
0.30 [0.012]
0.56 [0.022]
0.35 [0.014]
0.66 [0.026]
0.35 [0.014]
0.68 [0.027]
0.35 [0.014]
0.68 [0.027]
0.35 [0.014]
0.68 [0.027]
0.40 [0.016]
0.76 [0.030]
0.40 [0.016]
0.76 [0.030]
0.45 [0.018]
0.89 [0.035]
0.45 [0.018]
0.89 [0.035]
0.45 [0.018]
0.89 [0.035]
0.45 [0.018]
0.89 [0.035]
0.45 [0.018]
0.89 [0.035]
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering Information
Color
Size selection
Standard packaging
Ordering description
Standard
Black (-0)
Always order the largest size that will shrink snugly over the component to be covered.
On spools.
Specify product name, size and color (for example, ZH2-6.0-0).
1-144
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
1
ZH4
Heat-shrinkable Tubing
Very-Thin-Wall, Very
Flexible, Highly FlameRetardant, Low Recovery
Temperature, ZEROHAL
Polyolefin Tubing
Product Facts
2:1 shrink ratio
Highly flame-retardant;
UL/CSA VW-1 flammability
rating
■ Very thin wall provides
space savings and rapid
shrinking
■ Low shrink temperature
further reduces installation
time and risk of damage to
temperature-sensitive
components
■ Environmentally friendly
tubing essentially free of
halogens
■ Emits minimal amounts of
toxic or acid gasses when
burned
■ RoHS compliant
■
■
Applications
Electrical insulation and
protection of in-line components, disconnect terminals,
and splices in computers,
appliances, and other commercial electronic products.
Typically used where space
saving is important. Offers
the ability to pack components more closely than is
possible with standard
tubings. Used for strain
relief on high-density connectors. Suitable for use in
Specifications/Approvals
rail and mass transit vehicles, buildings, and other
enclosed areas where
emission of toxic gasses
from burning materials containing halogens is very
undesirable.
Installation
Minimum shrink
temperature: 70°C [158°F]
Minimum full recovery
temperature: 90°C [194°F]
Operating Temperature Range
-30°C to 125°C
[-22°F to 257°F]
Series
UL
CSA
ZH4
E85381 VW-1
300 V, 125ºC
LR31929 VW-1
150 V, 125ºC
Americas
Europe
Asia Pacific
■
■
■
Available in:
Raychem
®
RW-3036
1-145
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
ZH4 (Continued)
Product Dimensions
Size
0.6
0.8
1.0
1.5
2.0
2.5
3.0
3.5
4.0
5.0
6.0
7.0
8.0
9.0
10.0
Inside Diameter
Maximum
Expanded
as Supplied
Recovered
After Heating
0.95 ± 0.25 [0.037 ± 0.010]
0.30 [0.012]
1.20 ± 0.25 [0.047 ± 0.010]
0.40 [0.016]
1.40 ± 0.25 [0.055 ± 0.010]
0.50 [0.020]
1.90 ± 0.25 [0.075 ± 0.010]
0.75 [0.030]
2.30 ± 0.25 [0.091 ± 0.010]
1.00 [0.039]
2.80 ± 0.25 [0.110 ± 0.010]
1.25 [0.049]
3.30 ± 0.25 [0.130 ± 0.010]
1.50 [0.059]
3.80 ± 0.25 [0.150 ± 0.010]
1.75 [0.069]
4.40 ± 0.25 [0.173 ± 0.010]
2.00 [0.079]
5.50 ± 0.25 [0.217 ± 0.010]
2.50 [0.098]
6.50 ± 0.40 [0.256 ± 0.016]
3.00 [0.118]
7.50 ± 0.40 [0.295 ± 0.016]
3.50 [0.138]
8.50 ± 0.40 [0.335 ± 0.016]
4.00 [0.158]
9.50 ± 0.40 [0.374 ± 0.016]
4.50 [0.177]
10.50 ± 0.50 [0.413 ± 0.020]
5.00 [0.197]
Wall Thickness
Expanded as
Recovered*
Supplied
After Heating
(Nominal)
(Minimum)
0.10 [0.004]
0.25 [0.010]
0.10 [0.004]
0.25 [0.010]
0.10 [0.004]
0.25 [0.010]
0.10 [0.004]
0.25 [0.010]
0.10 [0.004]
0.25 [0.010]
0.15 [0.006]
0.25 [0.010]
0.15 [0.006]
0.25 [0.010]
0.15 [0.006]
0.25 [0.010]
0.15 [0.006]
0.25 [0.010]
0.15 [0.006]
0.25 [0.010]
0.15 [0.006]
0.28 [0.011]
0.15 [0.006]
0.28 [0.011]
0.15 [0.006]
0.28 [0.011]
0.15 [0.006]
0.28 [0.011]
0.15 [0.006]
0.28 [0.011]
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering Information
Color
Size selection
Standard packaging
Ordering description
Standard
Black (-0)
Always order the largest size that will shrink snugly over the component to be covered.
On spools.
Specify product name, size and color (for example, ZH4-2.0-0).
1-146
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
1
ZH-100
Heat-shrinkable Tubing
Flexible, Thin-Wall, LowFire-Hazard Tubing
Product Facts
2:1 shrink ratio
■ Low smoke emissions
■ Flexible, flame-retardant
■ No added halogens
■ Low evolution of acid gases
■ RoHS compliant
■
Specifications/Approvals
Applications
Installation
Operating Temperature Range
ZH-100 is a flexible,
thin-wall, heat-shrinkable
tubing designed for lowfire-hazard applications.
ZH-100 contains no added
halogens, and exhibits
excellent fire safety
characteristics combined
with low evolution of acid
gases, while retaining good
mechanical and fluid
resistance properties.
Minimum shrink
temperature: 80°C [176°F]
-30°C to 105°C
[-22°F to 221°F]
Minimum full recovery
temperature: 120°C [248°F]
Series
Industry
Raychem
ZH-100
BR 1326A
RW-2031
Available in:
Americas
Europe
Asia Pacific
■
■
■
1-147
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
ZH-100 (Continued)
Product Dimensions
Size
1/8
3/16
1/4
3/8
1/2
3/4
1
1 1/2
2
Inside Diameter
Minimum Expanded
Maximum Recovered
as Supplied
After Heating
3.2 [0.125]
1.6 [0.062]
4.8 [0.187]
2.4 [0.093]
6.4 [0.250]
3.2 [0.125]
9.5 [0.375]
4.8 [0.187]
12.7 [0.500]
6.4 [0.250]
19.0 [0.750]
9.5 [0.375]
25.4 [1.000]
12.7 [0.500]
38.0 [1.500]
19.0 [0.750]
51.0 [2.000]
25.4 [1.000]
Recovered Wall Thickness*
After Heating
0.50 ± 0.10 [0.019 ± 0.004]
0.50 ± .0.10 [0.019 ± 0.004]
0.65 ± 0.15 [0.026 ± 0.006]
0.65 ± 0.15 [0.026 ± 0.006]
0.65 ± 0.15 [0.026 ± 0.006]
0.75 ± 0.15 [0.030 ± 0.006]
0.90 ± 0.15 [0.035 ± 0.006]
1.00 ± 0.20 [0.039 ± 0.008]
1.15 ± 0.25 [0.045 ± 0.010]
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering Information
Color
Size selection
Standard packaging
Ordering description
Standard
Black (-0)
Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
On spools.
Specify product name, size and color (for example, ZH-100 1/8-0).
1-148
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
1
ZHTM
Heat-shrinkable Tubing
Heat-Shrinkable, Flexible
Tubing with Low Toxicity for
Fire Safety Applications
Product Facts
2:1 shrink ratio
Low smoke emission
■ System 100 tubing
■ RoHS compliant
■
■
Applications
A flexible, thick-wall, heatshrinkable tubing to be
used in conjunction with
-100 molded parts and
Zerohal cable to form
Raychem System 100. This
material exhibits excellent
fire safety characteristics
combined with low smoke
emission and low evolution
of acid gases while
retaining good mechanical
and fluid-resistance
Specifications/Approvals
properties. Used for
insulation and protection
of cables, harnesses, and
electrical and electronic
components in enclosed
spaces, such as in marine
applications, mass transit
systems, and offshore
installations, to reduce
toxicity risks, or where
equipment would be
irreparably damaged
by corrosive products
of combustion.
Installation
Minimum shrink
temperature: 80°C [176°F]
Minimum full recovery
temperature: 121°C [250°F]
Operating Temperature Range
-30°C to 105°C
[-22°F to 221°F]
Series
Military
Agency
Industry
Raychem
ZHTM
Def. Stan. 59-97
Issue 3 Type 8
BS 4G-198 Part 3 Type 15
VG 95343 Part 5 Type L
VDE 0341/Pt 9005
BR 1326A
RW-2058
Available in:
Americas
Europe
Asia Pacific
■
■
■
1-149
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
RAYCHEM Tubing Products
ZHTM (Continued)
Product Dimensions
Size
3/1.5
5/2.5
8/4
12/6
18/9
24/12
40/20
50/30
Inside Diameter
Minimum Expanded
Maximum Recovered
as Supplied
After Heating
3.0 [0.118]
1.5 [0.059]
5.0 [0.197]
2.5 [0.098]
8.0 [0.315]
4.0 [0.157]
12.0 [0.472]
6.0 [0.236]
18.0 [0.709]
9.0 [0.354]
24.0 [0.945]
12.0 [0.472]
40.0 [1.575]
20.0 [0.789]
50.0 [1.969]
30.0 [1.181]
Recovered Wall Thickness*
After Heating
0.70 ± 0.10 [0.028 ± 0.004]
0.75 ± 0.12 [0.030 ± 0.005]
0.80 ± 0.15 [0.031 ± 0.006]
0.90 ± 0.15 [0.035 ± 0.006]
1.00 ± 0.18 [0.039 ± 0.007]
1.10 ± 0.20 [0.043 ± 0.008]
1.30 ± 0.23 [0.051 ± 0.009]
1.50 ± 0.28 [0.059 ± 0.011]
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering Information
Color
Size selection
Standard packaging
Ordering description**
Standard
Black (-0)
Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
On spools.
Specify product name, size and color (for example, ZHTM 8/4-0).
**Europe only. For supply to Def Stan and BS add -DS or -BS to ordering description.
1-150
9-1773447-9
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666