CGAT • High strength bonding • Moisture proof • 3:1 shrink ratio Adhesive lined polyolefin heat-shrinkable tubing environmental protection of electrical components and the sealing of connectors. Typical applications are environmental sealing for electrical components, wire breakouts and cable jackets. • Environmental sealing CGAT is a flexible polyolefin heat-shrinkable tubing with an inner meltable adhesive lining. It is ideal for the Temperature rating Operating temperature range: -30°C to +80°C Minimum shrink temperature: +80°C Minimum full recovery temperature: +115°C Ordering information W W1 D Inside diameter d Wall thickness D (min) Expanded as supplied d (max) Recovered after heating mm mm W (nom) Recovered after heating Black Clear Standard package W1 (nom) Meltable wall recovered after heating 1.22m length quantity mm mm mm m Ordering description 3.0 1.0 1.00 1.00 0.5 30 CGAT-3/1-colour code 6.0 2.0 1.00 1.00 0.5 30 CGAT-6/2-colour code 9.0 3.0 1.35 1.40 0.6 30 CGAT-9/3-colour code 12.0 4.0 1.50 1.78 0.7 30 CGAT-12/4-colour code 18.0 6.0 1.70 2.25 0.8 30 CGAT-18/6-colour code 24.0 8.0 1.95 2.54 1.0 30 CGAT-24/8-colour code 39.0 13.0 2.10 2.54 1.0 12 CGAT-39/13-colour code Standard colours Colour Black Clear Code 0 X CGAT Approvals UL E 85381 Performance Test Test method Tensile strength: ISO 37 Test requirement 9 MPa (min) Ultimate elongation: ISO 37 200% (min) Heat shock: 4 h at 150°C Pass - no dripping, cracking or flowing of outer wall Heat ageing: 168 h at 125°C Pass - no dripping, cracking or flowing of outer wall Low temperature flexibility: 4 h at -55°C Pass - no cracking Dielectric strength: IEC 243 12 MV/m (min) Fluid resistance: 24 h at 23°C, ISO 37 Tensile strength: Ultimate elongation: Test fluids: Petrol 100 octane Engine oil (SAE 20W/50) Hydraulic fluid (SAE J1703) 5 MPa (min) 200% (min) For full product performance details consult Raychem Specification RW 2050. Specifications Raychem Specification RW 2050. Material Safety Data Sheet available on request. Installation instructions available on request. Raychem and CGAT are trademarks of Tyco Electronics Corporation. All of the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition Tyco Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification. Tyco/Electronics/Raychem 306 Constitution Drive Menlo Park, CA 94025 U.S.A Tel: (650)-361 3333 Tyco/Electronics/Raychem Cheney Manor Industrial Estate Swindon, Wiltshire SN2 2QE UK Tel: (44)-1793 573762 Tyco/Electronics/Raychem 3816 Noborito, Tama-ku Kawasaki 214-8533 Japan Tel: (81)-44 9005102 Tyco/Electronics/Raychem No. 26 Ang Mo Kio Ind. Park Singapore 569507 Tel: (65)-4866151 7/95 RI0020.1299