SCHRACK General Purpose Relays Slim PCB Relay PCN I 1 pole 3 A, 1 NO contact I Only 5 mm wide I 3 A switching current; 5 A version available I Load range 1 mA up to 3 A I Sensitive coil 120 mW I Allows high function-/packing density I Cadmium-free contacts I Z type with reinforced insulation I RoHS compliant (Directive 2002/95/EC) as per product date code 0424 Applications F0258-A Centralized and decentralized heating control, extremely narrow interface elements, interface technology, timers, PLC's, I/O modules, I/O-ports Approvals V REG.-Nr. 6166; Z E82292 Technical data of approved types on request Contact data Contact configuration Contact set Type of interruption Rated current Rated voltage / max.switching voltage AC Limiting continuous current Maximum breaking capacity AC Limiting making capacity, max 4 s, duty factor 10% Contact material Minimum contact load Mechanical endurance Rated frequency of operation with / without load Contact ratings Type PCN-1..D3M.(-,H).(-,Z) PCN-1..D3M.(-,H).(-,Z) PCN-1..D3M.(-,H).(-,Z) PCN-1..D3M.(-,H).(-,Z) PCN-1..D3M.(-,H).(-,Z), 1NO bifurcated contact micro disconnection 3A 250/277 VAC 3A 750 VA 5A AgNi90/10 5V / 1mA 20x106 cycles 10 / 1200 min-1 Load Cycles 3 A, 250 VAC resistive, 70°C, 20 cycles/min, EN61810-1 1x105 3 A, 30 VDC, resistive, 70°C, 20 cycles/min, EN61810-1 1x105 Pilot Duty B300 240 VAC, UL508 6x103 Pilot Duty B300 120 VAC, UL508 6x103 001 5A, 250 VAC res. 85°C, 10 cycles/min, EN61810-1 3x104 Coil data Rated coil voltage range DC coil Coil power DC coil Operative range DC5...24 VDC typ 120 mW 1 Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ohm mW 005 5 3.5 0.5 208+10% 120 006 6 4.2 0.6 300+10% 120 009 9 6.3 0.9 675+10% 120 012 12 8.4 1.2 1200+10% 120 024 24 16.8 2.4 4800+10% 120 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request 1 Datasheet Rev. HC1 Issued 2008/03 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. SCHRACK General Purpose Relays Slim PCB Relay PCN (Continued) Insulation PCB layout / terminal assignment Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit Material group of insulation parts Tracking index of relay base Insulation to IEC 60664-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degree Rated voltage system Overvoltage category as basic insulation Overvoltage category as reinforced insulation Bottom view on solder pins 3000 Vrms 750 Vrms W 3,5 / 3,5 mm I PTI 600 reinforced functional 277 V 2 277 V III II S0471-AA Other data RoHS - Directive 2002/95/EC compliant as per product date code 0424 Flammability class according to UL94 V-0 Ambient temperature range -30...+70 °C Operate- / release time typ. 5/2 ms Bounce time NO / NC contact < 1ms Vibration resistance (function) NO / NC contact 10 g Shock resistance (function) NO / NC contact 10 g Shock resistance (destruction) 100 g Category of protection RTIII - wash tight Mounting pcb Mounting position any Minimum mounting distance 0 mm Resistance to soldering heat wash tight version 260°C / 5 s Relay weight 3g Packaging unit 25 / 2000 pcs S0471-AB Dimensions S0472-A Product key P C N Type Number of contacts 1 1 pole Coil Coil code: please refer to coil versions table Coil version D standard 120 mW Contact material 3 AgNi Contact configuration M 1 NO contact Version H wash tight Insulation Z tracking resistance of relay base PTI 600 Version Blank 3 A version 001 Other types on request Product key PCN-105D3MHZ PCN-106D3MHZ PCN-112D3MHZ PCN-124D3MHZ Contacts 1-pole Coil 5 VDC 6 VDC 12 VDC 24 VDC 1 D 3 M H Z 5 A version Coil standard 120 mW Contacts 1 NO contact AgNi Version wash tight high insulation Part number 3-1461491-0 3-1461491-1 3-1461491-3 3-1461491-6 2 Datasheet Rev. HC1 Issued 2008/03 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.