Tyco/Electronics PRODUCT: RHE650 Raychem Circuit Protection DOCUMENT: SCD 24414 PCN: 715725 REV LETTER: C REV DATE: OCTOBER 8, 2001 PAGE NO.: 1 OF 1 Polyswitch® PTC Devices 308 Constitution Drive Menlo Park, CA 94025 800-227-4856 FAX 800-227-4866 Overcurrent Protection Device Specification Status: RELEASED Electrical Rating Voltage: 16V MAX Current: 100A MAX Insulating Material: Cured, Flame Retarded Epoxy Polymer meets UL94 V-0 Requirements Lead Material: 20 AWG Tin/Lead Plated Copper (0.8 mm [0.032] nom. Diameter) Marking: Raychem Logo and Voltage 16 H6.5 Part Identification Lot Identification (can be on back) TABLE I. DIMENSIONS: mm: in*: A B MIN MAX MIN MAX -12.7 -22.2 -(0.50) -(0.88) *Rounded off approximation C MIN 4.3 (0.17) D MAX 5.8 (0.23) MIN 7.6 (0.30) E MAX --- MIN --- MAX 3.0 (0.12) F TYP 1.2 (0.05) TABLE II. PERFORMANCE RATINGS: I HOLD CURRENT TIME TO RESISTANCE TRIPPED-STATE RATINGS TRIP VALUES POWER DISSIPATION AMPS AMPS SECONDS AT OHMS WATTS AT 25°C AT 25°C 25°C, 32.5 A AT 25°C 25°C, 16V HOLD HOLD TRIP MAX MIN MAX TYP 6.5 6.5 12.0 5.5 0.011 0.026 4.3 Recognitions: UL, TUV, CSA recognized. Reference Documents: PS300 Precedence: This specification takes precedence over documents referenced herein. Effectivity: Reference documents shall be the issue in effect on the date of invitation for bid. CAUTION: Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.