Axial Leaded Glass PIN Diodes Multi Purpose Axial Leaded Glass PIN Diodes Rev. V6 RoHs Compliant Glass Package Styles Features ♦ ♦ ♦ ♦ ♦ ♦ ♦ Glass Hermetically Sealed Packages Large Signal Switch Design Available in Low Capacitance Passivated Chip for Low Leakage Current Tape and Reel Packaging Available Fully RoHS Compliant MIL-STD 19500 Screening Available ODS 4, 54 , 139, 146 Description M/A-COM’s series of low and medium power glass PIN diodes are specifically designed for use in switches, duplexers, electrically tuned digital filters AGC attenuators, TR switches and RF modulators. They preform particularly well in distortion sensitive environments from HF through S-Band. These hermetically sealed axial leaded PIN diodes are designed for use in the harshest commercial and military applications where their inherent ruggedness makes them an ideal choice. They may ordered screened to meet MIL-STD 19500 requirements. Absolute Maximum Ratings TAMB = +25°C (Unless Otherwise Noted) 1 Parameter D.C. Reverse Voltage Absolute Maximum (See Tables) Operating Temperature Storage Temperature -55°C to +175°C -55°C to +200°C Installation Temperature +280°C for 10 Seconds Power Dissipation Listed Below Will De-Rate Linearly to 0mW at 175˚C 250mW without heatsink Case Style 54 @ +25°C 500mW without heatsink Case Style 139 @ +25°C 1000mW without heatsink Case Style 4 & 146 @ +25°C Notes 1. Operation of this device above any one of these parameters may cause permanent damage. PIN Chip Glass Cylinder Tin Plated Dumet Leads Design Recommendations The axial leaded, glass, PIN diode series is available in four glass package styles. The ODS 54 is the most suitable to meet low power, low capacitance requirements for high isolation in a series connected switch at VHF frequencies. The ODS 4, 139 and 146 are most suited for moderate power applications requiring low package inductance. M/A-COM’s silicon PIN diode chips are also available in a wide variety of alternative package styles besides glass. For case style options, availability and electrical specifications, please refer to the “Packaged PIN Diode Datasheet” located on the M/A-COM website at : www.macom.com/DataSheets/packagedpindiodes.pdf 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. Axial Leaded Glass PIN Diodes Multi Purpose Axial Leaded Glass PIN Diodes Rev. V6 RoHs Compliant Part Number MA47120 1N5719 MA4P203 MA47047 MA47600 MA4P404 Part Number MA4PH151 MA47110 MA47123 Unless otherwise noted Unless otherwise noted Package Style Rev. Volt. VR < 10 µA VDC Max. Cap. 1MHz CT @ -50V pF Max. Series Res. 54 54 54 54 54 54 35 100 100 200 200 250 1.00 0.35 Rev. Volt.5 Max. Cap. 1MHz Max. Series Res. 100MHz CT @ -50V pF 1.20 0.55 0.50 RS @ 10mA Ω 0.6 6.0 3.0 Max. Cap. 1MHz Max. Series Res. 100MHz CT @ -50V pF 1.50 1.10 RS @ 50mA Ω 0.6 1.0 Max. Cap. 1MHz Max. Series Res. 100MHz CT @ -100V pF RS @ 100mA Ω 5 Package Style VR < 10 µA VDC 139 139 139 100 200 200 Rev. Volt.5 Part Number MA47266 MA4PH301 Package Style VR < 10 µA VDC 146 146 200 200 Rev. Volt.5 Part Number 1 0.25 0.30 0.30 0.30 100MHz RS @ 10mA Ω 0.5 2 1.5 1.5 3.0 6.0 .60 2 3 Nominal Characteristics Carrier 4 Lifetime I Region Length μS Mils 3.0 0.4 1.0 2.0 0.1 0.8 1.0 2.0 2.0 4.0 1.0 1.0 Nominal Characteristics Carrier I Region Lifetime4 Length μS Mils 1.0 0.8 2.0 4.0 1.0 2.0 Nominal Characteristics Carrier I Region Lifetime4 Length μS Mils 3.0 3.0 5.0 5.0 Nominal Characteristics Carrier Lifetime4 I Region Length Package Style VR < 10 µA VDC MA4P504 4 500 0.35 0.60 1.0 2.0 MA4P505 4 500 0.50 0.45 2.0 2.0 MA4P506 4 500 0.85 0.30 3.0 2.0 MA4P606 4 1000 0.70 0.70 4.0 4.0 μS Mils Notes: 1. Tested at VR = 20V. 2. Tested at IF = 50mA. 3. Tested at VR = 10V. 4. Nominal carrier lifetime, TL, specified at IF = + 10mA , IREV = - 6mA. 5. Minimum specified reverse voltage, VR, is sourced and the resultant reverse leakage current, IR, is measured to be <10μA. 2 *Specifications subject to change without notice ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. Axial Leaded Glass PIN Diodes Multi Purpose Axial Leaded Glass PIN Diodes Rev. V6 RoHs Compliant Typical RS vs. IF @ TAMB = +25°C 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. Axial Leaded Glass PIN Diodes Multi Purpose Axial Leaded Glass PIN Diodes Rev. V6 RoHs Compliant SERIES RESISTANCE Rs (OHMS) Typical RS vs. IF @ TAMB = +25°C SERIES RESISTANCE Rs (OHMS) FORWARD CURRENT (IF) FORWARD CURRENT (IF) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. Axial Leaded Glass PIN Diodes Multi Purpose Axial Leaded Glass PIN Diodes Rev. V6 RoHs Compliant Package Outline Dimensions B A C D (2 plcs) Package Style Dimension A Dimension B Dimension C Dimension D Mils mm Mils mm Mils mm Mils mm 4 265 ± 35 7.33 ± .89 96 ± 11 2.44 ± .28 1100 ± 100 27.94 ± 2.54 20 ± 2 .51 ± .05 54 155 ± 10 3.94 ± .25 71 ± 3 1.8 ± .08 1100 ± 100 27.94 ± 2.54 15 ± 1 .38 ± .03 139 150 ± 15 3.81 ± .38 60 ± 10 1.52 ± .25 1100 ± 100 27.94 ± 2.54 20 ± 3 .51 ± .08 146 220 ± 20 5.59 ± .51 95 ± 10 2.41 ± .25 1100 ± 100 27.94 ± 2.54 20 ± 3 .51 ± .08 Assembly Recommendations • Leads on axial leaded devices must be formed while being held firm. Bending the leads too close to the body of the part may cause internal damage to the device. Bends <0.060” from body are not recommended. Appropriate fixturing should be used. • Devices may be soldered using standard 60/40, Sn/Pb or RoHS compliant solders. Axial leads are tin plated, 50μM, thick to ensure an optimum connection. • For recommended Sn/Pb and RoHS soldering profiles See Application Note M538 on the M/A-COM website. 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. Axial Leaded Glass PIN Diodes Multi Purpose Axial Leaded Glass PIN Diodes Rev. V6 RoHs Compliant Environmental Ratings M/A-COM’s axially leaded glass PIN diodes are designed to meet most environmental and electrical requirements and may be ordered screened to MIL-STD-19500 as described in the table below. TEST METHOD MIL-STD 750 DESCRIPTION/ CONDITIONS Moisture Resistance 1021 85°C, 85% Relative Humidity High Temperature Storage 1031 +175°C HTRB 1038 80% of rated VR, 50°C Temperature Cycling 1051 -65°C to +175°C, 20 Cycles Shock 2016 500 g’s Vibration 2056 15 g’s Solderability 2026 IPC/JDEC J-STD-02 Constant Acceleration 2006 20,000 g’s Fine Leak 1071 H Gross Leak 1071 C or E Ordering Information M/A-COM’s glass PIN diodes are tape and reeled in 1000 piece quantities. The various base part numbers are only available in the case styles as shown in the tables on page 2. To order, indicate the base part number followed by a dash and the indicated package style. Also add a “T” at the end for tape and reel For example: The MA4P504-4T is the MA4P504 chip in case style 4, tape and reeled. 6 *Specifications subject to change without notice ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.