CS 22 Vishay Sfernice Single Value Chip Resistor FEATURES • Small size 20 mil x 20 mil • Very high ohmic value up to 10 MΩ • Good stability 0.1 % (2000 h, rated power at + 70 °C) Actual Size Chromium silicon thin film is very well suited to produce high density and high ohmic value resistor chips. These high ohmic value chip resistors are available with improved performances and size when compared to thick film counterparts. • Wirebondable TYPICAL PERFORMANCE ABS TCR 100 ppm/°C TOL. 0.5 % SCHEMATIC AND PATTERN R STANDARD ELECTRICAL SPECIFICATIONS TEST MATERIAL Resistance range Absolute TCR SPECIFICATIONS PASSIVATED CHROMIUM SILICON 10 kΩ to 10 MΩ ± 100 ppm/°C (± 50 ppm/°C on request) Absolute tolerance ± 0.5 %, ± 1 %, ± 2 % Power dissipation 100 mW at + 25 °C, 50 mW at + 70 °C, 25 mW at + 125 °C Stability Working voltage 2000 h at + 70 °C at Pn 100 VDC Higher on Al2O3 - 55 °C to + 155 °C Storage temperature range - 55 °C to + 155 °C Thermal EMF Shelf life stability - 55 °C to + 155 °C ± 0.1 % typical, ± 0.2 maximum Operating temperature range Noise CONDITIONS < - 20 dB typical MIL-STD-202 Method 308 < 0.01 µV/°C 200 ppm 1 year at + 25 °C * Please see document “Vishay Green and Halogen-Free Definitions (5-2008)” http://www.vishay.com/doc?99902 www.vishay.com 22 For technical questions, contact: [email protected] Document Number: 60063 Revision: 06-Oct-08 CS 22 Single Value Chip Resistor Vishay Sfernice DIMENSIONS DIMENSION B A C E D INCHES MILLIMETERS A 0.021 ± 0.002 0.55 ± 0.10 B 0.021 ± 0.002 0.55 ± 0.10 C 0.004 0.10 D 0.004 0.10 E 0.015 0.40 maximum MECHANICAL SPECIFICATIONS Resistive element Chromium Silicon Passivation Silicon Nitride Substrate material Silicon (consult Vishay for Al2O3) Bonding pads Aluminum GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CS22-100KD0016 (preferred part number format) C S GLOBAL MODEL 2 2 - 1 0 0 K D 0 0 1 6 VALUE TOLERANCE OPTION Decimal R, K or M D = ± 0.5 % F = ± 1.0 % G = ± 2.0 % leave blank if no option Historical Part Number example: CS22 150K 0.5 % R0016 (will continue to be accepted) CS22 150K 0.5 % R0016 HISTORICAL MODEL VALUE TOLERANCE OPTION Document Number: 60063 Revision: 06-Oct-08 For technical questions, contact: [email protected] www.vishay.com 23 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1