TA 22 Vishay Sfernice Single Value Chip Resistor FEATURES • Small size 20 mil square • Resistance range 10 Ω to 1 MΩ • Resistor material: self-passivating Tantalum Nitride • Silicon substrate for good power dissipation Actual Size Thin film resistors are often an excellent solution for analog design problems where space is limited and high packing density is required. Due to their Tantalum Nitride resistive layer these resistors are stable 0.07 % (2000 h, rated power at + 70 °C) and moisture resistant. • Low cost • Wirebondable TYPICAL PERFORMANCE ABS TCR 100 ppm/°C TOL. 0.5 % SCHEMATIC AND PATTERN R STANDARD ELECTRICAL SPECIFICATIONS TEST MATERIAL Resistance range Absolute TCR SPECIFICATIONS TANTALUM NITRIDE 10 Ω to 1 MΩ ± 100 ppm/°C (± 50 ppm/°C on request) Absolute tolerance ± 0.5 %, ± 1 %, ± 2 % Power dissipation 100 mW at 25 °C, 50 mW at + 70 °C, 25 mW at + 125 °C Stability Voltage coefficient Working voltage ± 0.07 % typical, ± 0.1 maximum - 55 °C to + 155 °C - 55 °C to + 155 °C Shelf life stability 2000 h at + 70 °C at Pn 50 VDC Storage temperature range Thermal EMF - 55 °C to + 155 °C < 0.1 ppm/V Operating temperature range Noise CONDITIONS < - 35 dB typical MIL-STD-202 Method 308 < 0.01 µV/°C 100 ppm 1 year at + 25 °C * Please see document “Vishay Green and Halogen-Free Definitions (5-2008)” http://www.vishay.com/doc?99902 www.vishay.com 40 For technical questions, contact: [email protected] Document Number: 60062 Revision: 06-Oct-08 TA 22 Single Value Chip Resistor Vishay Sfernice DIMENSIONS DIMENSION B A C E D INCHES MILLIMETERS A 0.021 ± 0.002 0.55 ± 0.10 B 0.021 ± 0.002 0.55 ± 0.10 C 0.004 0.10 D 0.004 0.10 E 0.015 0.40 maximum MECHANICAL SPECIFICATIONS Resistive element Tantalum Nitride Passivation Tantalum Pentoxide (Autopassivation) Substrate material Standard Silicon Bonding pads Aluminum GLOBAL PART NUMBER INFORMATION New Global Part Numbering: TA22-100KD0016 (preferred part number format) T A GLOBAL MODEL 2 2 - 1 0 0 K D 0 0 1 6 VALUE TOLERANCE OPTION Decimal R, K or M D = ± 0.5 % F = ± 1.0 % G = ± 2.0 % leave blank if no option Historical Part Number example: TA22 10K 0.5 % R0016 (will continue to be accepted) TA22 10K 0.5 % R0016 HISTORICAL MODEL VALUE TOLERANCE OPTION Document Number: 60062 Revision: 06-Oct-08 For technical questions, contact: [email protected] www.vishay.com 41 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1