UTC-IC MJE3055T

UNISONIC TECHNOLOGIES CO., LTD
MJE3055T
NPN SILICON TRANSISTOR
HIGH VOLTAGE TRANSISTOR
„
DESCRIPTION
The UTC MJE3055T is designed for general purpose of
amplifier and switching applications.
Lead-free:
MJE3055TL
Halogen-free: MJE3055TG
„
ORDERING INFORMATION
Normal
MJE3055T-TA3-T
MJE3055T-TM3-T
MJE3055T-TN3-R
Ordering Number
Lead Free Plating
MJE3055TL-TA3-T
MJE3055TL-TM3-T
MJE3055TL-TN3-R
Halogen Free
MJE3055TG-TA3-T
MJE3055TG-TM3-T
MJE3055TG-TN3-R
www.unisonic.com.tw
Copyright © 2009 Unisonic Technologies Co., Ltd
Package
TO-220
TO-251
TO-252
Pin Assignment
1
2
3
B
C
E
B
C
E
B
C
E
Packing
Tube
Tube
Tape Reel
1 of 2
QW-R203-011.C
MJE3055T
„
NPN SILICON TRANSISTOR
ABSOLUTE MAXIMUM RATINGS (TC=25°С, unless otherwise specified)
PARAMETER
Collector-Base Voltage
Collector-Emitter Voltage
Emitter-Base Voltage
RATINGS
UNIT
70
V
60
V
5
V
TO-220
75
W
Total Power Dissipation
PD
TO-251/TO-252
20
W
Collector Current
IC
10
A
Base Current
IB
6
A
Junction Temperature
TJ
150
°С
Storage Temperature
TSTG
-55 ~ +150
°С
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
„
SYMBOL
VCBO
VCEO
VEBO
ELECTRICAL CHARACTERISTICS (Ta=25°С, unless otherwise specified)
PARAMETER
Collector-Emitter Breakdown Voltage
Collector-Base Breakdown Voltage
Emitter-Base Breakdown Voltage
SYMBOL
BVCEO
BVCBO
BVEBO
ICBO
Collector Cut-off Current
ICEO
ICEX
Emitter Cut-off Current
IEBO
VCE(SAT)1
Collector-Emitter Saturation Voltage (Note)
VCE(SAT)2
Base-Emitter on Voltage
VBE(ON)
hFE1
DC Current Gain (Note)
hFE2
Current Gain Bandwidth Product
fT
Note: Pulse test: PW≤300μs, duty cycle≤2% Pulse
TEST CONDITIONS
IC=200mA
IC=10mA
IE=10mA
VCB=70V
VCE=30V
VCE=70V, VEB(OFF)=1.5V
VEB=5V
IC=4A, IB=0.4A
IC=10A, IB=3.3A
VCE=4V, IC=4A
VCE=4V , IC=4A
VCE=4V , IC=10A
VCE=10V, IC=0.5A, f=1MHz
MIN
60
70
5
20
5
2
TYP
MAX UNIT
V
V
V
1
mA
700
μA
1
mA
5
mA
1.1
V
8
V
1.8
V
100
MHZ
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 2
QW-R203-011.C