UNISONIC TECHNOLOGIES CO., LTD TIP110A Preliminary PNP SILICON TRANSISTOR LOW SATURATION VOLTAGE PNP DARLINGTON TRANSISTOR DESCRIPTION The UTC TIP110A is designed for using in general purpose amplifier and switching applications. FEATURES * Low VCE(SAT) * High Current Gain ORDERING INFORMATION Ordering Number Lead Free Halogen Free TIP110AL-TA3-T TIP110AG-TA3-T www.unisonic.com.tw Copyright © 2009 Unisonic Technologies Co., Ltd Package TO-220 Pin Assignment 1 2 3 B C E Packing Tube 1 of 3 QW-R203-004.C TIP110A Preliminary PNP SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS (Ta=25°С, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Collector to Base Voltage VCBO -45 V Collector to Emitter Voltage VCEO -35 V Emitter to Base Voltage VEBO -5 V Collector Current IC -10 A Power Dissipation PD 65 W Junction Temperature TJ 150 °С Storage Temperature TSTG -55 ~ +150 °С Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (Ta=25°С, unless otherwise specified) PARAMETER Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collect Cut-off Current Collector-Emitter Cut-Off Current Emitter Cut-off Current Collector-Emitter Saturation Voltage Base-Emitter On Voltage DC Current Gain SYMBOL BVCBO BVCEO BVEBO ICBO ICEO IEBO VCE(SAT) VBE(ON) hFE1 hFE2 TEST CONDITIONS IC=-10mA, IE=0A IC =-1mA, IB =0A IE=-10mA, IC=0A VCB =-45V, IE =0A VCE =-35V, IB=0A VBE =-5V, IC=0A IC =-10A, IB =-0.1A VCE =-2.0V ,IC =-5mA VCE =-2.0V ,IC =-0.5A VCE =-2.0V ,IC =-10A UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN -45 -35 -5 2000 1000 TYP MAX UNIT V -4 -10 -2.0 -2.0 -2.0 60000 60000 μA μA mA V V 2 of 3 QW-R203-004.C TIP110A Preliminary PNP SILICON TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R203-004.C