Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide High Performance RFI Filters for Switching Power Supplies G Series UL Recognized CSA Certified VDE Approved 1 10EG1 / 10VG1 RFI Power Line Filters 6EG1 / 6VG1 G Series Specifications • Designed to provide excellent attenuation for most digital electronics equipment • Broad frequency range of performance from 20kHz to 30MHz • Size and cost-effective solution • Designed to help comply with EN55022 Level A and FCC Part 15J Class B Maximum leakage current each Line to Ground: EG Models VG Models .30 mA .50 mA 1.2 mA 2.0 mA @ 120 VAC 60 Hz: @250 VAC 50 Hz: Hipot rating (one minute): Line to Ground: Line to Line: Rated Voltage (max): 250 VAC Operating Frequency: 50/60 Hz Rated Current: Ordering Information 10 E G 1 Input / Output Style 1 – .250 [6.3] spade terminals 2250 VDC 1450 VDC 6 & 10A Operating Ambient Temperature Range (at rated current Ir): -10°C to +40°C In an ambient temperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io = Ir (85-Ta)/45 G Series Electrical Schematics Leakage current designation E – Low leakage (<0.5 mA) V – Standard 6EG1 & 6VG1 LINE LOAD Current Rating 6 or 10A Available Part Numbers 6EG1 10EG1 10EG1 & 10VG1 6VG1 10VG1 LINE LOAD 35 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide High Performance RFI Filters for Switching Power Supplies (continued) G Series Case Styles Case Dimensions Part No. 6EG1/VG1 B 10EG1/VG1 D E A A B C D E C Performance Data Typical Insertion Loss Common Mode / Asymmetrical (L-G) Differential Mode / Symmetrical (L-L) Measured in closed 50 Ohm system 6EG1 6VG1 10EG1 10VG1 db 100 db 100 db 100 db 100 90 90 90 90 80 80 80 80 70 70 70 70 60 60 60 60 50 50 50 50 40 40 40 40 30 30 30 30 20 20 20 20 10 10 10 0 0 0 0.01 0.1 1 10 30 Frequency in MHz 0.01 0.1 1 10 30 Frequency in MHz 10 0.01 0.1 1 10 30 Frequency in MHz 0 0.01 0.1 1 10 30 Frequency in MHz Minimum Insertion Loss Common Mode / Asymmetrical (Line to Ground) Differential Mode / Symmetrical (Line to Line) 36 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com