Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide PC Board Mountable General Purpose RFI Filters EBP, EDP & EOP Series UL Recognized* CSA Certified* VDE Approved* 1 1EDP / 1EOP RFI Power Line Filters 1EBP EBP Series Specifications • General purpose • Low leakage current • Cost-effective • Compact size Maximum leakage current each Line to Ground: EDP/EOP EBP @ 120 VAC 60 Hz: .22 mA .13 mA @250 VAC 50 Hz: .38 mA .21 mA Hipot rating (one minute): Line to Ground: Line to Line: EDP Series 2250 VDC 1450 VDC • Enhanced differential mode performance Rated Voltage (max): 250 VAC • Low leakage current Operating Frequency: 50/60 Hz • Cost-effective Rated Current: EOP Series • General purpose • Low leakage current • Cost-effective Ordering Information 1 to 10A Operating Ambient Temperature Range (at rated current Ir): -10°C to +40°C In an ambient temperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io = Ir (85-Ta)/45 Electrical Schematic EBP LINE LOAD 6 EDP EBP Series Compact Size EDP & EOP EDP Series Enhanced Performance LINE LOAD EOP Series General Performance Current Rating 1, 3, 6 or 10A *EBP models are approved to VDE standards only Available Part Numbers 1EBP 1EDP 3EDP 6EDP 10EDP 3EBP 1EOP 3EOP 6EOP 10EOP 21 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide PC Board Mountable General Purpose RFI Filters (continued) EBP, EDP, EOP Series Case Styles EBP Case Dimensions A Part No. EBP C EDP .35 Max. 8.97 EOP A B C LINE .787 20.00 B .394 10.00 LOAD .098 2.5 .590 15.0 .098 2.5 Performance Data Typical Insertion Loss EDP / EOP A Measured in closed 50 Ohm system C .35 Max. 8.97 LINE LOAD .31 ± .02 7.87 ± .5 .591 ± .006 15.00 ± .15 B 1EBP 3EBP db 100 db 100 90 90 80 80 70 70 60 60 50 50 40 40 30 30 20 20 10 0 10 0.1 1 10 30 Frequency in MHz 0 0.1 1 10 30 Frequency in MHz .295 ± .006 7.50 ± .15 .689 ± .006 17.50 ± .15 .36 ± .02 9.10 ± .5 Common Mode / Asymmetrical (L-G) Differential Mode / Symmetrical (L-L) 22 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide PC Board Mountable General Purpose RFI Filters (continued) EBP, EDP & EOP Series Performance Data (continued) Typical Insertion Loss Common Mode / Asymmetrical (L-G) Differential Mode / Symmetrical (L-L) Measured in closed 50 Ohm system 3EDP 6EDP 10EDP db 100 db 100 db 100 db 100 90 90 90 90 80 80 80 80 70 70 70 70 60 60 60 60 50 50 50 50 40 40 40 40 30 30 30 30 20 20 20 20 10 10 10 0 0.1 1 0 10 30 Frequency in MHz 0.1 1 10 30 Frequency in MHz 0 10 0.1 1 0 10 30 Frequency in MHz 0.1 1EOP 3EOP 6EOP 10EOP db 100 db 100 db 100 db 100 90 90 90 90 80 80 80 80 70 70 70 70 60 60 60 60 50 50 50 50 40 40 40 40 30 30 30 30 20 20 20 20 10 10 10 0 0 0 0.1 1 10 30 Frequency in MHz 0.1 1 10 30 Frequency in MHz 1 RFI Power Line Filters 1EDP 1 10 30 Frequency in MHz 1 10 30 Frequency in MHz 10 0.1 1 0 10 30 Frequency in MHz 0.1 Minimum Insertion Loss Measured in closed 50 Ohm system Common Mode / Asymmetrical (Line to Ground) Differential Mode / Symmetrical (Line to Line) 23 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com