SHD114623 SHD114623A SHD114623B SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4121, REV. B POWER SCHOTTKY RECTIFIER Very Low Voltage Drop (S-100 for JANTXV equivalent screening and SS for JANS equivalent screening is available) DESCRIPTION: A 60 VOLT, 120 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD-3/3A/3B PACKAGE. MAXIMUM RATINGS ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED. RATING PEAK INVERSE VOLTAGE MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 OC) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT SYMBOL MAX. UNITS PIV 60 Volts IO 120 Amps IFSM 1650 Amps CT 5000 pF RθJC 0.20 °C/W Top/Tstg -65 to + 175 °C SYMBOL MAX. UNITS Vf 0.79 Volts (t=8.3ms, Sine) MAXIMUM JUNCTION CAPACITANCE (Vr =5V) MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode) MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 120 Amps) TJ = 25 °C TJ = 125 °C 0.72 MAXIMUM REVERSE CURRENT (Ir @ 60V PIV) TJ = 25 °C TJ = 125 °C Ir 3 180 • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] • mA SHD114623 SHD114623A SHD114623B SENSITRON TECHNICAL DATA DATA SHEET 4121, REV. B MECHANICAL DIMENSIONS: In Inches / mm .560±.020 .550±.020 (14.0±.508) .410±.010 (10.4±.254) (14.2±.508) .410±.010 (10.4±.254) .410±.010 (10.4±.254) .410±.010 (10.4±.254) .410±.010 (10.4±.254) .200±.010 (5.08 ±.254) .150±.010 (3.81±.254) .410±.010 (10.4±.254) .015±.005 (.381±.127) .075 (1.91) Max Copper Anode .020±.005 R (.508±.127 ) Moly Lid .020±.005 R .090 (2.29) Max Alumina Ring .075 (1.91) Max (.508±.127 ) Moly Lid Alumina Ring Alumina Ring .020±.002 (.508±.051) Moly Base (Cathode) .015±.002 (.381±.051) Moly Base .060±.010 (1.52±.254) Moly Anode (Cathode) Moly Base .060±.010 SHD-3 SHD-3A PINOUT TABLE TYPE SINGLE RECTIFIER Note: The Vf curves are for unpackaged die only SHD-3B PIN 1 (Base) CATHODE Typical Forward Characteristics PIN 2 ANODE Typical Reverse Characteristics (mA) 10 3 101 125 °C 10 2 125 °C 100 °C 10 1 75 °C 10 0 50 °C 10 -1 25 °C 10 -2 0 10 25 °C 20 30 40 Reverse Voltage - V R (V) 50 60 Typical Junction Capacitance 100 Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) Instantaneous Reverse Current - I R 102 10 -1 0.0 0.2 0.4 0.6 Forward Voltage Drop - V F (V) 0.8 (1.52±.254) 4500 4000 3500 3000 2500 2000 1500 0 10 20 30 40 50 Reverse Voltage - V R (V) 60 • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] • SHD114623 SHD114623A SHD114623B SENSITRON TECHNICAL DATA DATA SHEET 4121, REV. B DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •