PJSR05TB4 SERIES LOW CAPACITANCE TVS AND DIODE ARRAY This diode array is configured to protect up to two data transmission lines acting as a line terminator, minimizing overshoot and undershoot conditions due to bus impedance as well as protect against over-voltage events as electrostatic discharges. Additionaly the TVS Device offers overvoltage transient protection between the operating voltage bus and ground plane. New package SOT-543 offers an ideal solution, minimizing board space in portable consumer appliactions. 4 FEATURES • Peak power dissipation of 350W 8x20μs • Maximum capacitance of 1.2pF at 0Vdc 1MHz Line-to-Ground • Maximum leakage current of 1.0μA@VRWM • New SMT package SOT-543 • IEC61000-4-2 compliant 15kV Air, 8kV contact • In compliance with EU RoHS 2002/95/EC directives MECHANICAL DATA • Case: SOT-543, Molded Plastic • Terminals: Solderable per MIL-STD-750, Method 2026 • Polarity: See circuit schematic below • Approx. Weight: 0.002 gram APPLICATIONS • USB 2.0 and Firewire Ports Protection • LAN / WLAN Access Point terminals • HDMI V1.3 Video Port Protection • DVI Port MAXIMUM RATINGS TJ=25oC unless otherwise noted PARAMETER SYMBOL VALUE UNIT PPPM 350 W S o ld e r i ng Te m p e ra tur e , t m a x=1 0 s TL 260 o Op e r a ti ng J unc ti o n Te m p e r a tur e Ra ng e TJ -55 to + 125 O TSTG -55 to + 150 o Peak Pulse Power (8/20μs Waveform) Storage Temperature Range VREF 4 GND1 REV.0.1-JAN.5.2010 C C C 3 I/O1 2 I/O2 PAGE . 1 PJSR05TB4 SERIES ELECTRICAL CHARACTERISTICS(TJ=25oC) unless otherwise noted PJSR05TB4 Marking R5 Parameter Symbol Reverse Stand-Off Voltage Condition VRWM Reverse Breakdown Voltage VBR I BR=1mA Min. Typ. Max. Units - - 5 V 6.2 - - V Reverse Leakage Current IR VR=5V - - 1 μA Clamping Voltage (8/20μs) VC I PP=1A - - 9 V Clamping Voltage (8/20μs) VC I PP=5A - - 12 V Off State Junction Capacitance CJ - 0.9 1.2 pF Off State Junction Capacitance CJ - 0.5 0.6 pF Min. Typ. Max. Units - - 12 V PJSR12TB4 0 Vdc Bias f=1MHZ Between I/O pins and GND 0 Vdc Bias f=1MHz Between I/O pins Marking R2 Parameter Symbol Reverse Stand-Off Voltage Condition VRWM VBR I BR=1mA 13.3 - - V Reverse Leakage Current IR VR=12V - - 1 μA Clamping Voltage (8/20μs) VC I PP=1A - - 18 V Clamping Voltage (8/20μs) VC I PP=5A - - 22 V Off State Junction Capacitance CJ - 0.9 1.2 pF Off State Junction Capacitance CJ - 0.5 0.6 pF Reverse Breakdown Voltage 0 Vdc Bias f=1MHZ Between I/O pins and GND 0 Vdc Bias f=1MHz Between I/O pins APPLICATION EXAMPLE USB2.0 Connector Vbus+ D+ D- REV.0.1-JAN.5.2010 USB Controller PAGE . 2 PJSR05TB4 SERIES MOUNTING PAD LAYOUT 4 0.038 (1.0) ORDER INFORMATION • Packing information T/R - 4K per 7" plastic Reel T/R - 10K per 13" plastic Reel LEGAL STATEMENT Copyright PanJit International, Inc 2010 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. REV.0.1-JAN.5.2010 PAGE . 3