FAIRCHILD KBU4A

KBU4A - KBU4M
0.935(23.7)
0.895(22.7)
0.280(7.1)
0.260(6.6)
0.16(4.1)
0.14(3.6)
0.085(2.2)
Features
•
High surge current capability.
•
Reliable construction technique.
•
Ideal for printed circuit board.
0.065(1.7)
45°
+
+
0.70(17.8)
0.66(16.8)
0.0760(19.3)
MAX
0.455(11.3)
–
~
~ +
0.405(10.3)
0.165(4.2)
0.150(3.8)
1.0(2.54)
MIN
KBU
0.260(6.8)
0.180(4.5)
0.220(5.6)
0.180(4.6)
4.0 Ampere Silicon Bridge Rectifiers
Absolute Maximum Ratings*
Symbol
IO
0.052(1.3)
0.048(1.2)
Dimensions are in: inches (mm)
TA = 25°C unless otherwise noted
Parameter
Value
Units
4.0
A
Average Rectified Current
@ TA = 50°C
Peak Forward Surge Current
200
A
RθJA
Total Device Dissipation
Derate above 25°C
Thermal Resistance, Junction to Ambient,** per leg
6.6
53
19
W
mW/°C
°C/W
RθJL
Thermal Resistance, Junction to Lead,** per leg
4.0
°C/W
Tstg
Storage Temperature Range
-55 to +150
°C
TJ
Operating Junction Temperature
-55 to +150
°C
if(surge)
PD
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
**Device mounted on PCB with 0.375 " (9.5 mm) lead length and 0.5 x 0.5" (13 x 13 mm) copper pads.
Electrical Characteristics
TA = 25°C unless otherwise noted
Parameter
Device
4B
Peak Repetitive Reverse Voltage
50
100
200
400
Maximum RMS Bridge Input Voltage
35
70
140
280
DC Reverse Voltage
(Rated VR)
Maximum Reverse Leakage,
total bridge @ rated VR TA = 25°C
TA = 100°C
Maximum Forward Voltage Drop,
per bridge
@ 4.0 A
50
100
200
400
600
1998 Fairchild Semiconductor Corporation
4D
4G
Units
4A
4J
4K
4M
600
800
1000
V
420
560
700
V
800
1000
V
5.0
500
µA
µA
1.0
V
KBU4A-KBU4M, Rev. A
KBU4A - KBU4M
Discrete POWER & Signal
Technologies
(continued)
Typical Characteristics
Forward Current Derating Curve
Forward Characteristics
100
FORWARD CURRENT (A)
FORWARD CURRENT (A)
5
4
3
SINGLE PHASE
HALF WAVE
60HZ
RESISTIVE OR
INDUCTIVE LOAD
.375" 9.0 mm LEAD
LENGTHS
2
1
0
0
50
100
AMBIENT TEMPERATURE ( º C)
10
1
TA
J = 25º C
Pulse Width = 300µS
2% Duty Cycle
0.1
0.6
150
Non-Repetitive Surge Current
1.2
1.3
100
175
REVERSE CURRENT (µ A)
FORWARD SURGE CURRENT (A)
0.8
0.9
1
1.1
FORWARD VOLTAGE (V)
Reverse Characteristics
200
150
125
100
75
50
25
0
0.7
1
2
5
10
20
50
NUMBER OF CYCLES AT 60Hz
100
T A= 100º C
10
1
T A= 25º C
0.1
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
KBU4A-KBU4M, Rev. A
KBU4A - KBU4M
Silicon Bridge Rectifiers
KBU Package Dimensions
KBU (FS PKG Code R7)
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 8.0
0.935(23.7)
0.895(22.7)
0.185(4.7)
0.165(4.2)
0.16(4.1)
0.14(3.6)
0.280(7.1)
0.260(6.6)
0.085(2.2)
45°
+
+
0.70(17.8)
0.66(16.8)
0.760(19.3)
MAX
0.065(1.7)
0.455(11.3)
–
~
~ +
0.405(10.3)
0.165(4.2)
0.150(3.8)
1.0(2.54)
MIN
0.260(6.8)
0.180(4.5)
0.220(5.6)
0.180(4.6)
0.052(1.3)
0.048(1.2)
July 1999, Rev. A
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ISOPLANAR™
MICROWIRE™
POP™
PowerTrench 
QFET™
QS™
Quiet Series™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
ACEx™
CoolFET™
CROSSVOLT™
E2CMOSTM
FACT™
FACT Quiet Series™
FAST®
FASTr™
GTO™
HiSeC™
TinyLogic™
UHC™
VCX™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
2. A critical component is any component of a life
support device or system whose failure to perform can
systems which, (a) are intended for surgical implant into
be reasonably expected to cause the failure of the life
the body, or (b) support or sustain life, or (c) whose
support device or system, or to affect its safety or
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.