0.125 X 45O (3.2) Typ 0.600 (15.2) 0.560 (14.3) Features • • 0.460 (11.7) 0.420 (10.7) Surge overload rating: 50 amperes peak. 0.500 (12.7) 0.460 (11.7) + ~ ~ - Reliable low cost construction utilizing molded plastic technique. 0.500 Min (12.7) 0.600 Min (15.2) KBPM 0.160 (4.1) 0.140 (3.6) 0.060 Typ (1.52) 1.5 Ampere Bridge Rectifiers 0.034 (8.6) 0.028 (7.6) Dimensions are in: inches (mm) Absolute Maximum Ratings* TA = 25°C unless otherwise noted Value Units Average Rectified Current @ TA = 50°C Peak Forward Surge Current 1.5 A 50 A RqJA Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient,** per leg 3.5 25 40 W mW/°C °C/W Tstg Storage Te mperature Range -55 to +165 °C TJ Operating Junction Tem perature -55 to +165 °C Symbol IO if(surge) PD Parameter *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. **Device mounted on PCB with 0.47 x 0.47" (12 x 12 mm). Electrical Characteristics TA = 25°C unless otherwise noted Parameter Device 005M 246 01M 247 Peak Repetitive Reverse Voltage 50 100 200 400 Maximum RMS Bridge Input Voltage 35 70 140 280 DC Reverse Voltage (Rated VR) Maximum Reverse Leakage, total bridge @ rated VR TA = 25°C TA = 100°C Maximum Forward Voltage Drop, per bridge @ 1.0 A @ 3.14 A 2 I t rating for fusing t < 8.35 ms 50 100 200 400 600 Typi cal Junction Capacitance, per leg VR = 4.0 V, f = 1.0 MHz ã1998 Fairchild Semiconductor Corporation 02M 248 04M 249 Units 06M 250 08M 251 10M 252 600 800 1000 V 420 560 700 V 800 1000 V 5.0 500 mA mA 1.0 1.3 10 V V 2 A Sec 15 pF KBP005M/3N246-KBP10M/3N252, Rev. A KBP005M/3N246 - KBP10M/3N252 KBP005M/3N246 - KBP10M/3N252 (continued) Typical Characteristics Output Current vs. Ambient Temperature Forward Characteristics 5 FORWARD CURRENT (A) OUTPUT CURRENT (A) 2 1.5 1 0.5 0 0 TYPICAL DISTRIBUTION 1 MEDIAN 0.1 0.01 50 100 150 AMBIENT TEMPERATURE ( º C) Reverse Characteristics 0.4 0.6 0.8 1 FORWARD VOLTAGE (V) 1.2 1.4 Non-Repetitive Surge Current FORWARD SURGE CURRENT (A) REVERSE CURRENT ( µ A) 0.2 50 100 10 TA = 25º C 1 0.1 0 0 20 40 60 80 100 120 NORMALIZED REVERSE VOLTAGE (%) 140 40 30 20 10 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 KBP005M/3N246-KBP10M/3N252, Rev. A KBP005M/3N246 - KBP10M/3N252 Bridge Rectifiers TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.