FAIRCHILD W10G

W005G - W10G
W005G - W10G
0.358(9.1)
0.339(8.6) DIA
Features
0.217(5.5)
0.197(5.0)
•
Surge overload rating: 50 amperes
peak.
•
Glass passivated junction.
•
Ideal for printed circuit board.
•
Reliable low cost construction technique
results in inexpensive product.
1.0(25.4)
MIN
1.2(30.5)
MIN
Dimensions are in:
inches (mm)
0.032(.81)
0.030(.76) DIA
POS.LEAD
WOB
0.220(5.6)
0.180(4.6)
~
+
0.220(5.6)
0.180(4.6)
~
1.5 Ampere Glass Passivated Bridge Rectifiers
Absolute Maximum Ratings*
Symbol
IO
TA = 25°C unless otherwise noted
Parameter
Value
Units
1.5
A
50
A
3.47
28
36
W
mW/°C
°C/W
RqJA
Average Rectified Current
@ TA = 50°C
Peak Forward Surge Current
8.3 ms single half-sine-wave
Superimposed on rated load (JEDEC method)
Total Device Dissipation
Derate above 25°C
Thermal Resistance, Junction to Ambient,** per leg
RqJL
Thermal Resistance, Junction to Lead,** per leg
11
°C/W
Tstg
Storage Temperature Range
-55 to +150
°C
TJ
Operating Junction Temperature
-55 to +150
°C
if(surge)
PD
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
**Device mounted on PCB with 0.375" (9.5 mm) lead length.
Electrical Characteristics
TA = 25°C unless otherwise noted
Parameter
Device
Units
005G
01G
02G
04G
06G
08G
10G
Peak Repetitive Reverse Voltage
50
100
200
400
600
800
1000
Maximum RMS Bridge Input Voltage
35
70
140
280
420
560
700
V
DC Reverse Voltage
(Rated VR)
Maximum Reverse Leakage,
total bridge @ rated VR TA = 25°C
TA = 125°C
Maximum Forward Voltage Drop,
per bridge
@ 1.0 A
I2t rating for fusing
t < 8.3 ms
50
100
200
400
600
800
1000
V
Typical Junction Capacitance, per leg
VR = 4.0 V, f = 1.0 MHz
ã1999 Fairchild Semiconductor Corporation
V
5.0
500
mA
mA
1.0
10
V
A2Sec
15
pF
W005G - W10G, Rev. A
(continued)
Typical Characteristics
Forward Current Derating Curve
FORWARD CURRENT (A)
1.5
1
0.5
SINGLE PHASE
HALF WAVE
60HZ
RESISTIVE OR
INDUCTIVE LOAD
.375" (9.0mm) LEAD
LENGTHS
0
25
50
75
100
125
150
AMBIENT TEMPERATURE ( º C)
175
PEAK FORWARD SURGE CURRENT (A)
Non-Repetitive Surge Current
2
50
40
30
20
10
0
1
Forward Characteristics
2
5
10
20
50
NUMBER OF CYCLES AT 60Hz
100
Reverse Characteristics
20
10
REVERSE CURRENT ( µ A)
FORWARD CURRENT (A)
10
1
TA = 25º C
Pulse Width = 300µs
2% Duty Cycle
0.1
0.01
0
0.2
0.4
0.6
0.8
1
FORWARD VOLTAGE (V)
1.2
1.4
1
T A = 100 º C
0.1
TA = 25º C
0.01
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
W005G - W10G, Rev. A
W005G - W10G
Glass Passivated Bridge Rectifiers
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™
CoolFET™
CROSSVOLT™
E2CMOSTM
FACT™
FACT Quiet Series™
FAST®
FASTr™
GTO™
HiSeC™
ISOPLANAR™
MICROWIRE™
POP™
PowerTrench™
QS™
Quiet Series™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
TinyLogic™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
2. A critical component is any component of a life
support device or system whose failure to perform can
systems which, (a) are intended for surgical implant into
be reasonably expected to cause the failure of the life
the body, or (b) support or sustain life, or (c) whose
support device or system, or to affect its safety or
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.