HMC-C013 v03.1007 CONNECTORIZED MODULES - AMPLIFIERS 9 10 WATT POWER AMPLIFIER MODULE, 800 - 2000 MHz Features P1dB Output Power: 10 Watts Gain: 43 dB Output IP3: +56 dBm Single Positive Supply: +12V Thermally Compensated and Protected TTL DC Power Enable Unconditionally Stable Heat Sink/Fan Accessories Available Typical Applications The HMC-C013 is ideal for: • Cellular/PCS/3G Infrastructure • Automated Test Equipment (ATE) • Laboratory Use Functional Diagram F ti l Di General Description The HMC-C013 is a 10 Watt Power Amplifier Module suitable for Cellular/3G repeaters, wireless data, laboratory use and ATE applications. This extremely robust PA module is DC blocked, internally regulated and over voltage protected. Thermal protection/fault circuitry automatically turns off DC power if base temperature exceeds +75 °C and restores power at < +55 °C. Electrical Specifi cations, TA = +25° C, VIN = +12V Parameter Min. Frequency Range Max. Units GHz dB Gain 39 43 Input Return Loss 9.5 12 dB Output Return Loss 7.5 14 dB Output Power for 1 dB Compression (P1dB) 10 W 42 dBm Output Third Order Intercept (IP3) (Two-tone Input Power = -28 dBm each tone) 56 dBm Channel Output Power for -60 dBc ACPR (CDMA-2000, 1.98 MHz offset) 38 dBm Channel Output Power for -50 dBc ACPR (CDMA-2000, 885 kHz offset) 35 dBm Second Harmonic at Output P1dB -20 dBc Third Harmonic at Output P1dB -30 dBc Spurious at Output P1dB -65 Supply Current 6.5 Saturated Output Power (Psat) 9 - 32 Typ. 0.8 - 2.0 9 dBc 7.0 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com A HMC-C013 v03.1007 10 WATT POWER AMPLIFIER MODULE, 800 - 2000 MHz 9 Output IP3 vs. Temperature 49 65 47 60 45 IP3 (dBm) GAIN (dB) 55 43 41 50 +25 C +50 C 0C 45 39 +25 C +50 C 0C 37 35 0.7 0.9 1.1 1.3 1.5 40 1.7 1.9 35 0.7 2.1 0.9 1.1 FREQUENCY (GHz) 45 42 42 39 36 +25 C +50 C 0C 30 0.7 0.9 1.1 1.3 1.7 1.9 2.1 1.5 1.7 1.9 2.1 39 36 +25 C +50 C 0C 33 1.7 1.9 30 0.7 2.1 0.9 1.1 FREQUENCY (GHz) 1.3 1.5 FREQUENCY (GHz) ACPR, CDMA-2000, 1.98 MHz Offset ACPR, CDMA-2000, 885 kHz Offset -40 -30 800 MHz 900 MHz 1850 MHz 1910 MHz 1960 MHz CDMA2000 Rev. 8 Adjacent Channel Offset: 1.98 MHz Integration BW: 1.228 MHz Forward Link, SRI, 9 Channels 800 MHz 900 MHz 1850 MHz 1910 MHz 1960 MHz -40 ACPR (dBc) -50 ACPR (dBc) 1.5 Psat vs. Temperature 45 Psat (dBm) P1dB (dBm) P1dB vs. Temperature 33 1.3 FREQUENCY (GHz) CONNECTORIZED MODULES - AMPLIFIERS Gain vs. Temperature -60 -70 -80 -50 -60 CDMA2000 Rev. 8 Adjacent Channel Offset: 885 kHz Integration BW: 1.228 MHz Forward Link, SRI, 9 Channels -70 -90 -80 30 31 32 33 34 35 36 CHANNEL OUTPUT POWER (dBm) 37 38 30 31 32 33 34 35 36 37 38 CHANNEL OUTPUT POWER (dBm) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 9 - 33 HMC-C013 v03.1007 10 WATT POWER AMPLIFIER MODULE, 800 - 2000 MHz 9 Input Return Loss vs. Temperature Output Return Loss vs. Temperature 0 +25 C +50 C 0C -10 -15 -20 -10 -15 -20 -25 -30 0.7 +25 C +50 C 0C -5 RETURN LOSS (dB) RETURN LOSS (dB) -5 0.9 1.1 1.3 1.5 1.7 1.9 -25 0.7 2.1 0.9 1.1 1.3 1.5 1.7 1.9 2.1 1.9 2.1 FREQUENCY (GHz) FREQUENCY (GHz) Noise Figure vs. Temperature Reverse Isolation vs. Temperature 0 20 -10 16 +25 C +50 C 0C -20 NOISE FIGURE (dB) ISOLATION (dB) CONNECTORIZED MODULES - AMPLIFIERS 0 -30 -40 -50 12 8 +25 C +50 C 0C 4 -60 -70 0.7 0.9 1.1 1.3 1.5 1.7 1.9 0 0.7 2.1 0.9 1.1 Absolute Maximum Ratings 1.3 1.5 1.7 FREQUENCY (GHz) FREQUENCY (GHz) Thermal Fault Indicator Characteristics Supply Voltage (VIN) +13 Vdc RF Input Power (RFIN) +10 dBm IOUT (VOUT > 2V) Storage Temperature -40 to +85 °C RON (I OUT = 50 mA) Operating Temperature 0 to +50 °C ROFF (VOUT = 30 V) Thermal Fault Indicator Max Pdiss (derate 1.8 mW/°C above 50 °C) 180 mW Enable -0.5 to +6.0 Vdc Parameter Min. Typ. Max. Units 7.5 Ohms 350 mA 1 MOhm Enable Input Characteristics Parameter ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS VIH VIL IIL @ VIN = 0V IIH @ 5V 9 - 34 Min. Typ. Max. Units 1.6 V 3.5 V -0.5 mA < ± 50 μA For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com HMC-C013 v03.1007 10 WATT POWER AMPLIFIER MODULE, 800 - 2000 MHz TURN-ON 1. Connect RF input and output 2. Apply Supply Voltage VIN (+12 Vdc) 3. Set Enable low 4. Apply RF input signal TURN-OFF 1. Remove RF input signal 2. Remove Supply Voltage VIN Pin Descriptions Pin Number Function Description 1 RFIN & RF Ground RF input connector, SMA female. This pin is AC coupled and matched to 50 Ohms. 2 VIN Power supply voltage for the amplifier. 3 GND Power supply ground. 4 RFOUT & RF Ground RF output connector, SMA female. This pin is AC coupled and matched to 50 Ohms. 5 GND Ground for thermal fault indicator and enable circuit. 6 Thermal Fault Indicator Open drain output. High impedance for base plate temperatures less than 55 °C. Low impedance for base plate temperatures exceeding 75 °C. Interface Schematic CONNECTORIZED MODULES - AMPLIFIERS 9 Recommended Biasing Procedure TTL compatible supply voltage (VIN) shutdown. If enable feature is not required, short this pin to DC ground. 7 Enable TTL “High” Disable TTL “Low” Enable For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 9 - 35 HMC-C013 v03.1007 10 WATT POWER AMPLIFIER MODULE, 800 - 2000 MHz CONNECTORIZED MODULES - AMPLIFIERS 9 Outline Drawing Package Information Package Type C-7 Package Weight [1] 740 gms [2] Spacer Weight N/A [1] Includes the connectors [2] ±10% Tolerance NOTES: 1. MATERIAL: ALUMINUM 6061-T6 2. FINISH a. COVER & END PLATES, CHEMICAL FILM PER MIL-C-5541, CLASS 3 b. BASE, TIN 3. RF CONNECTORS, SMA STYLE 4. DIMENSIONS ARE INCHES (MM) 5. TOLERANCES .X±.1 (2.54mm) .XX±.02 (0.50mm) 6. DRAWING TO CHANGE AS REQUIRED. 7. BASE MUST BE GROUNDED AND MOUNTED TO HEAT SINK CAPABLE OF DISSIPATING 100W (65 °C) 9 - 36 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com HMC-C013 v03.1007 10 WATT POWER AMPLIFIER MODULE, 800 - 2000 MHz NOTES: 1. MATERIAL: ALUMINUM 6061-T6 2. FINISH: COVER & END PLATES, CHEMICAL FILM PER MIL-C-5541, CLASS 3 3. RF CONNECTORS, SMA STYLE 4. DIMENSIONS ARE INCHES (MM) 5. TOLERANCES .X±.1 (2.54mm) .XX±.02 (0.50mm) 9 CONNECTORIZED MODULES - AMPLIFIERS HMC-C013 Heatsink/Fan Outline Drawing HMC-C008 Ordering Information Part Number Description HMC-C013 10 Watt Power Amplifier Module, 800 - 2000 MHz HMC-C013HV115 10 Watt Power Amplifier Module with heat sink, 115 Vac fan and power cord. HMC-C013HV230 10 Watt Power Amplifier Module with heat sink, 230 Vac fan and power cord. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 9 - 37