HMC-C013 v01.1205 AMPLIFIERS - CONNECTORIZED MODULES 9 10 WATT POWER AMPLIFIER MODULE, 800 - 2000 MHz Features P1dB Output Power: 10 Watts Gain: 43 dB Output IP3: +56 dBm Single Positive Supply: +12V Thermally Compensated and Protected TTL DC Power Enable Unconditionally Stable Heat Sink/Fan Accessories Available Typical Applications The HMC-C013 is ideal for: • Cellular/PCS/3G Infrastructure • Automated Test Equipment (ATE) • Laboratory Use Functional Diagram General Description The HMC-C013 is a 10 Watt Power Amplifier Module suitable for Cellular/3G repeaters, wireless data, laboratory use and ATE applications. This extremely robust PA module is DC blocked, internally regulated and over voltage protected. Thermal protection/fault circuitry automatically turns off DC power if base temperature exceeds +75 °C and restores power at < +55 °C. Electrical Specifications, TA = +25° C, VIN = +12V Parameter Min. Frequency Range Max. Units GHz dB Gain 39 43 Input Return Loss 9.5 12 dB Output Return Loss 7.5 14 dB Output Power for 1 dB Compression (P1dB) 10 W 42 dBm Output Third Order Intercept (IP3) (Two-tone Input Power = -28 dBm each tone) 56 dBm Channel Output Power for -60 dBc ACPR (CDMA-2000, 1.98 MHz offset) 38 dBm Channel Output Power for -50 dBc ACPR (CDMA-2000, 885 kHz offset) 35 dBm Second Harmonic at Output P1dB -20 dBc Third Harmonic at Output P1dB -30 dBc Spurious at Output P1dB -65 Supply Current 6.5 Saturated Output Power (Psat) 9 - 32 Typ. 0.8 - 2.0 9 dBc 7.0 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com A HMC-C013 v01.1205 10 WATT POWER AMPLIFIER MODULE, 800 - 2000 MHz 65 60 55 50 +25 C +50 C 0C 45 40 35 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) Psat vs. Temperature 45 44 43 42 41 40 39 38 37 36 35 +25 C 34 +50 C 0C 33 32 31 30 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 Psat (dBm) P1dB (dBm) P1dB vs. Temperature 45 44 43 42 41 40 39 38 37 36 35 +25 C 34 +50 C 0C 33 32 31 30 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) FREQUENCY (GHz) ACPR, CDMA-2000, 1.98 MHz Offset AMPLIFIERS - CONNECTORIZED MODULES 50 49 48 47 46 45 44 43 42 41 40 39 +25 C 38 +50 C 0C 37 36 35 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) ACPR, CDMA-2000, 885 kHz Offset -40 -30 800 MHz 900 MHz 1850 MHz 1910 MHz 1960 MHz CDMA2000 Rev. 8 Adjacent Channel Offset: 1.98 MHz Integration BW: 1.228 MHz Forward Link, SRI, 9 Channels 800 MHz 900 MHz 1850 MHz 1910 MHz 1960 MHz -40 ACPR (dBc) -50 ACPR (dBc) 9 Output IP3 vs. Temperature OIP3 (dBm) GAIN (dB) Gain vs. Temperature -60 -70 -80 -50 -60 CDMA2000 Rev. 8 Adjacent Channel Offset: 885 kHz Integration BW: 1.228 MHz Forward Link, SRI, 9 Channels -70 -90 -80 30 31 32 33 34 35 36 CHANNEL OUTPUT POWER (dBm) 37 38 30 31 32 33 34 35 36 37 38 CHANNEL OUTPUT POWER (dBm) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 33 HMC-C013 v01.1205 9 Input Return Loss vs. Temperature 10 WATT POWER AMPLIFIER MODULE, 800 - 2000 MHz Output Return Loss vs. Temperature 0 RETURN LOSS (dB) -10 -15 -20 +25 C +50 C 0C -5 RETURN LOSS (dB) +25 C +50 C 0C -5 -10 -15 -20 -25 -30 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 -25 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) Reverse Isolation vs. Temperature FREQUENCY (GHz) Noise Figure vs. Temperature 0 20 18 -10 +25 C +50 C 0C -20 -30 -40 -50 NOISE FIGURE (dB) 16 ISOLATION (dB) AMPLIFIERS - CONNECTORIZED MODULES 0 14 12 10 8 6 4 -60 +25 C +50 C 0C 2 -70 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 0 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) Absolute Maximum Ratings FREQUENCY (GHz) Thermal Fault Indicator Characteristics Supply Voltage (VIN) +13 Vdc RF Input Power (RFIN) +10 dBm IOUT (VOUT > 2V) Storage Temperature -40 to +85 °C RON (I OUT = 50 mA) Operating Temperature 0 to +50 °C ROFF (VOUT = 30 V) Thermal Fault Indicator Max Pdiss (derate 1.8 mW/°C above 50 °C) 180 mW Enable -0.5 to +6.0 Vdc Parameter Min. Typ. Max. Units 7.5 Ohms 350 mA 1 MOhm Enable Input Characteristics Parameter ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS VIH Typ. IIH @ 5V Max. Units 1.6 V 3.5 V VIL IIL @ VIN = 0V 9 - 34 Min. -0.5 mA < ± 50 μA For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC-C013 v01.1205 10 WATT POWER AMPLIFIER MODULE, 800 - 2000 MHz TURN-ON 1. Connect RF input and output 2. Apply Supply Voltage VIN (+12 Vdc) 3. Set Enable low 4. Apply RF input signal TURN-OFF 1. Remove RF input signal 2. Remove Supply Voltage VIN Pin Descriptions Pin Number Function Description 1 RFIN & RF Ground RF input connector, SMA female. This pin is AC coupled and matched to 50 Ohms from 800 - 2000 MHz. 2 VIN Power supply voltage for the amplifier. 3 GND Power supply ground. 4 RFOUT & RF Ground RF output connector, SMA female. This pin is AC coupled and matched to 50 Ohms from 800 - 2000 MHz. 5 GND Ground for thermal fault indicator and enable circuit. 6 Thermal Fault Indicator Open drain output. High impedance for base plate temperatures less than 55 °C. Low impedance for base plate temperatures exceeding 75 °C. Interface Schematic AMPLIFIERS - CONNECTORIZED MODULES 9 Recommended Biasing Procedure TTL compatible supply voltage (VIN) shutdown. If enable feature is not required, short this pin to DC ground. 7 Enable TTL “High” Disable TTL “Low” Enable For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 35 HMC-C013 v01.1205 AMPLIFIERS - CONNECTORIZED MODULES 9 10 WATT POWER AMPLIFIER MODULE, 800 - 2000 MHz Outline Drawing NOTES: 1. MATERIAL: ALUMINUM 6061-T6 2. FINISH a. COVER & END PLATES, CHEMICAL FILM PER MIL-C-5541, CLASS 3 b. BASE, TIN 3. RF CONNECTORS, SMA STYLE 4. DIMENSIONS ARE INCHES (MM) 5. TOLERANCES .X±.1 (2.54mm) .XX±.02 (0.50mm) 6. DRAWING TO CHANGE AS REQUIRED. 7. BASE MUST BE GROUNDED AND MOUNTED TO HEAT SINK CAPABLE OF DISSIPATING 100W (65 °C) 9 - 36 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC-C013 10 WATT POWER AMPLIFIER MODULE, 800 - 2000 MHz HMC-C013 Heatsink/Fan Outline Drawing NOTES: 1. MATERIAL: ALUMINUM 6061-T6 2. FINISH: COVER & END PLATES, CHEMICAL FILM PER MIL-C-5541, CLASS 3 3. RF CONNECTORS, SMA STYLE 4. DIMENSIONS ARE INCHES (MM) 5. TOLERANCES .X±.1 (2.54mm) .XX±.02 (0.50mm) 9 AMPLIFIERS - CONNECTORIZED MODULES v01.1205 HMC-C008 Ordering Information Part Number Description HMC-C013 10 Watt Power Amplifier Module, 800 - 2000 MHz HMC-C013HV115 10 Watt Power Amplifier Module with heat sink, 115 Vac fan and power cord. HMC-C013HV230 10 Watt Power Amplifier Module with heat sink, 230 Vac fan and power cord. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 37