Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 2253661254 Item: MK05-1A66C-2500W Preliminary Datasheet Magnetic properties Pull in Test equipment MK05-1A71C-2500W Conditions Min Typ at 20°C Special Product Data Contact - form Contact rating Switching voltage Carry current Switching current Sensor-resistance Housing material Case color Sealing compound Max Unit KMS-14, SA002+PK002 Conditions Min Typ Max Unit A - NO not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC !" # $ % ! % Sensor deactivated Environmental data Conditions Operating temperature Operating temperature Storage temperature Shock Vibration cable not moved cable moved Cable specification Conditions PBT glass fibre reinforced white Polyurethan Min Typ ( ( ( Max ' ' ' 1/2 sine wave duration 11ms from 10 - 2000 Hz Min Cable typ Cable material Cross section [mm²] Typ Unit & & & ) ) Max Unit Max Unit flat cable PVC 0,14 Conditions General data Mounting advice Mounting advice Mounting advice Tightening torque + " , -+ Disk ISO 7089 Min Typ over 5m cable, a series resistor is recommended. Decreased switching distances by mounting on iron. Magnetically conductive screws must not be used. * ' Modifications in the sense of technical progress are reserved Designed at: 19.02.07 Designed by: MPOTUZAK Approval at: Last Change at: 16.07.09 Last Change by: WKOVACS Approval at: 20.02.07 Approval by: Approval by: DSTASTNY Version: 03