148 RUS www.vishay.com Vishay BCcomponents Aluminum Capacitors Radial, Ultra High CV per Volume, Semi-Professional FEATURES • Very long useful life: 3000 h at 105 °C • High reliability • Miniaturized, ultra high CV-product per unit volume • Polarized aluminum electrolytic capacitors, non-solid electrolyte • Radial leads, cylindrical aluminum case with pressure relief, insulated with a blue sleeve 152 RMH • Charge and discharge proof high voltage 048 RML lower CV/volume 148 RUS • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 low Z longer life 150 RMI APPLICATIONS • EDP, telecommunication, industrial, automotive and audio-video • Smoothing, filtering, buffering in SMPS, timing • Portable and mobile equipment (small size, low mass) QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Category temperature range Endurance test at 105 °C: Case Ø D = 10 mm Case Ø D12.5 mm Useful life at 105 °C: Case Ø D = 10 mm Case Ø D12.5 mm Useful life at 40 °C, 1.6 x IR applied: Case Ø D = 10 mm Case Ø D12.5 mm Shelf life at 0 V, 105 °C Based on sectional specification Climatic category IEC 60068 VALUE 10 x 12 to 18 x 35 47 μF to 22 000 μF ± 20 % 6.3 V to 100 V - 40 °C to + 105 °C MARKING The capacitors are marked (where possible) with the following information: • Rated capacitance value (in μF) • Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %) 1000 h 2000 h • Rated voltage (in V) 2000 h 3000 h • Date code, in accordance with IEC 60062 • Code indicating factory of origin 140 000 h 200 000 h 1000 h IEC 60384-4/EN 130300 40/105/56 • Name of manufacturer • Upper category temperature (105 °C) • Negative terminal identification • Series number (148) SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) CR (μF) 47 68 100 150 220 330 470 680 1000 Revision: 12-Apr-13 UR (V) 6.3 - 10 10 x 12 - 16 10 x 12 10 x 16 - 25 10 x 12 10 x 16 10 x 20 - 35 10 x 12 10 x 16 10 x 20 12.5 x 20 - 50 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 63 10 x 12 10 x 16 12.5 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 25 - 100 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 25 16 x 31 - Document Number: 28315 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 148 RUS www.vishay.com Vishay BCcomponents SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) UR (V) CR (μF) 1500 2200 3300 4700 6800 10 000 15 000 22 000 6.3 10 x 16 12.5 x 20 16 x 20 16 x 25 16 x 31 18 x 35 10 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 25 16 x 31 18 x 35 - 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 25 16 x 31 18 x 35 - 25 12.5 x 20 12.5 x 25 16 x 20 16 x 25 16 x 31 18 x 35 - 35 12.5 x 25 16 x 20 16 x 25 16 x 31 18 x 35 - 50 16 x 25 16 x 31 18 x 35 - 63 16 x 31 18 x 35 - 100 - DIMENSIONS in millimeters, AND AVAILABLE FORMS 4+1 0 L Ød + + ØD F F ØD - 5 min. L 15 min. Ød Fig. 2 - Form CA: Long leads Fig. 3 - Form CB: Cut leads Fig. 4 - Form TFA: Taped in box (ammopack) Table 1 DIMENSIONS in millimeters, MASS, AND PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 25 16 x 31 18 x 35 CASE CODE Ød Ø Dmax. Lmax. F MASS (g) 14 15 16 17 18 19a 19 20 22 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 10.5 10.5 10.5 13.0 13.0 16.5 16.5 16.5 18.5 13.5 17.5 22.0 22.0 27.0 22.0 27.0 33.5 37.5 5.0 ± 0.5 5.0 ± 0.5 5.0 ± 0.5 5.0 ± 0.5 5.0 ± 0.5 7.5 ± 0.5 7.5 ± 0.5 7.5 ± 0.5 7.5 ± 0.5 1.6 1.9 2.2 4.0 5.0 6.0 8.0 9.0 14.5 PACKAGING QUANTITIES FORM FORM FORM CA CB TFA 1000 500 800 500 500 800 500 500 800 500 500 500 250 250 500 250 250 250 250 250 250 100 100 250 100 100 - Note • For detailed tape dimensions, please see www.vishay.com/doc?28360 Revision: 12-Apr-13 Document Number: 28315 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 148 RUS www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA SYMBOL Electrolytic capacitor 148 series DESCRIPTION CR Rated capacitance at 100 Hz, tolerance ± 20 % 470 μF/25 V; ± 20 % IR Rated RMS ripple current at 100 Hz, 105 °C Nominal case size: Ø 10 mm x 12 mm; form TFA Max. leakage current after 2 min at UR Ordering code: MAL214836471E3 Max. dissipation factor at 100 Hz Former 12NC: 2222 148 36471 IL2 tan Z Max. impedance at 100 kHz Note • Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. Table 2 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 6.3 10 16 25 ORDERING CODE MAL2148....... NOMINAL CASE SIZE ØDxL (mm) IR 100 Hz 105 °C (mA) IL2 2 min (μA) 2200 10 x 16 720 139 4700 12.5 x 20 1100 296 0.34 0.085 0.60 53472E3 63472E3 33472E3 6800 16 x 20 1210 428 0.38 0.060 0.30 53682E3 63682E3 33682E3 10 000 16 x 25 1660 630 0.46 0.045 0.25 53103E3 63103E3 33103E3 15 000 16 x 31 2050 945 0.56 0.033 0.15 53153E3 63153E3 33153E3 22 000 18 x 35 2350 1386 0.66 0.032 0.15 53223E3 63223E3 - 1000 10 x 12 460 100 0.24 0.240 3.00 54102E3 64102E3 34102E3 1500 10 x 16 620 150 0.24 0.170 1.90 54152E3 64152E3 34152E3 2200 10 x 20 750 220 0.26 0.130 1.50 54222E3 64222E3 34222E3 3300 12.5 x 20 1010 330 0.28 0.085 0.60 54332E3 64332E3 34332E3 4700 12.5 x 25 1260 470 0.30 0.065 0.50 54472E3 64472E3 34472E3 4700 16 x 20 1260 470 0.30 0.060 0.30 94475E3 94476E3 94473E3 CR 100 Hz (μF) tan 100 Hz 0.30 Z 100 kHz 20 °C () Z 100 kHz - 40 °C () FORM CA FORM CB FORM TFA 0.170 1.90 53222E3 63222E3 33222E3 BULK PACKAGING TAPED 6800 16 x 25 1590 680 0.34 0.045 0.25 54682E3 64682E3 34682E3 10 000 16 x 31 1910 1000 0.42 0.033 0.15 54103E3 64103E3 34103E3 15 000 18 x 35 2200 1500 0.52 0.032 0.15 54153E3 64153E3 - 680 10 x 12 450 109 0.20 0.240 3.00 55681E3 65681E3 35681E3 1000 10 x 16 570 160 0.20 0.180 2.00 55102E3 65102E3 35102E3 1500 10 x 20 720 240 0.20 0.130 1.50 55152E3 65152E3 35152E3 2200 12.5 x 20 930 352 0.22 0.090 0.60 55222E3 65222E3 35222E3 3300 12.5 x 25 1180 528 0.24 0.065 0.50 55332E3 65332E3 35332E3 3300 16 x 20 1120 528 0.24 0.060 0.30 95335E3 95336E3 95333E3 4700 16 x 25 1480 752 0.26 0.045 0.25 55472E3 65472E3 35472E3 6800 16 x 31 1790 1088 0.30 0.035 0.20 55682E3 65682E3 35682E3 10 000 18 x 35 2100 1600 0.36 0.032 0.20 55103E3 65103E3 - 470 10 x 12 410 118 0.16 0.260 3.20 56471E3 66471E3 36471E3 680 10 x 16 550 170 0.16 0.190 2.10 56681E3 66681E3 36681E3 1000 10 x 20 690 250 0.16 0.130 1.50 56102E3 66102E3 36102E3 1500 12.5 x 20 850 375 0.16 0.100 0.70 56152E3 66152E3 36152E3 2200 12.5 x 25 1110 550 0.18 0.070 0.50 56222E3 66222E3 36222E3 2200 16 x 20 1050 550 0.18 0.060 0.30 96225E3 96226E3 96223E3 3300 16 x 25 1420 825 0.20 0.045 0.25 56332E3 66332E3 36332E3 4700 16 x 31 1750 1175 0.22 0.035 0.20 56472E3 66472E3 36472E3 6800 18 x 35 2050 1700 0.26 0.033 0.20 56682E3 66682E3 - Revision: 12-Apr-13 Document Number: 28315 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 148 RUS www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION CR 100 Hz (μF) UR (V) 35 50 63 100 330 470 680 1000 1500 1500 2200 3300 4700 220 330 470 680 1000 1000 1500 2200 3300 100 220 330 470 680 680 1000 1500 2200 47 68 100 150 220 220 330 470 NOMINAL CASE SIZE ØDxL (mm) IR 100 Hz 105 °C (mA) IL2 2 min (μA) 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 25 16 x 31 18 x 35 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 25 16 x 31 18 x 35 10 x 12 10 x 16 12.5 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 25 16 x 31 18 x 35 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 25 16 x 31 350 480 580 810 950 970 1270 1620 1930 330 420 530 720 950 880 1180 1520 1810 230 350 540 540 760 820 980 1390 1670 165 190 260 360 440 590 630 750 116 165 238 350 525 525 770 1155 1645 110 165 235 340 500 500 750 1100 1650 63 139 208 296 428 428 630 945 1386 47 68 100 150 220 220 330 470 tan 100 Hz 0.14 0.14 0.14 0.14 0.14 0.14 0.16 0.18 0.20 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.16 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.12 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 Z 100 kHz 20 °C () Z 100 kHz - 40 °C () 0.270 0.190 0.140 0.100 0.070 0.063 0.045 0.037 0.033 0.280 0.200 0.140 0.100 0.070 0.068 0.047 0.039 0.035 0.320 0.240 0.130 0.130 0.085 0.070 0.049 0.042 0.038 0.640 0.580 0.380 0.260 0.170 0.140 0.120 0.100 3.30 2.10 1.60 0.70 0.50 0.30 0.25 0.20 0.20 3.40 2.20 1.60 0.70 0.50 0.35 0.30 0.20 0.20 3.90 2.70 0.90 0.90 0.65 0.50 0.25 0.20 0.20 19.20 17.40 11.40 7.80 5.10 4.20 3.60 3.00 ORDERING CODE MAL2148....... BULK PACKAGING FORM CA 50331E3 50471E3 50681E3 50102E3 50152E3 90155E3 50222E3 50332E3 50472E3 51221E3 51331E3 51471E3 51681E3 51102E3 91105E3 51152E3 51222E3 51332E3 58101E3 58221E3 58331E3 58471E3 58681E3 98685E3 58102E3 58152E3 58222E3 59479E3 59689E3 59101E3 59151E3 59221E3 99225E3 59331E3 59471E3 FORM CB 60331E3 60471E3 60681E3 60102E3 60152E3 90156E3 60222E3 60332E3 60472E3 61221E3 61331E3 61471E3 61681E3 61102E3 91106E3 61152E3 61222E3 61332E3 68101E3 68221E3 68331E3 68471E3 68681E3 98686E3 68102E3 68152E3 68222E3 69479E3 69689E3 69101E3 69151E3 69221E3 99226E3 69331E3 69471E3 TAPED FORM TFA 30331E3 30471E3 30681E3 30102E3 30152E3 90153E3 30222E3 30332E3 31221E3 31331E3 31471E3 31681E3 31102E3 91103E3 31152E3 31222E3 38101E3 38221E3 38331E3 38471E3 38681E3 98683E3 38102E3 38152E3 39479E3 39689E3 39101E3 39151E3 39221E3 99223E3 39331E3 39471E3 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Us 1.15 UR Surge voltage Urev 1 V Reverse voltage Current Leakage current After 2 min at UR IL2 0.01 CR x UR After 5 min at UR IL5 0.002 CR x UR Inductance Equivalent series inductance (ESL) Case Ø D = 10 mm Typ. 16 nH Case Ø D 12.5 mm Typ. 18 nH Calculated from tan max. and CR (see Table 2) ESR = tan /2 f CR Resistance Equivalent series resistance (ESR) Revision: 12-Apr-13 Document Number: 28315 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 148 RUS www.vishay.com Vishay BCcomponents CAPACITANCE (C) 1.2 C C0 1.2 C C0 1.0 1 2 3 1.1 3 0.0 1.0 2 0.6 1 2 3 0.9 0.4 Curve 1: 10 V Curve 2: 63 V Curve 3: 100 V 1 Curve 1: 10 V Curve 2: 50 V Curve 3: 100 V 0.2 0.8 0 - 60 - 40 - 20 0 20 40 60 C0 = Typical capacitance at 20 °C, 100 Hz 80 100 Tamb (°C) 120 102 10 103 104 105 Tamb = 20 °C C0 = Typical capacitance at 20 °C, 100 Hz Fig. 5 - Typical multiplier of capacitance as a function of ambient temperature Fig. 6 - Typical multiplier of capacitance as a function of frequency EQUIVALENT SERIES RESISTANCE (ESR) 2.0 C C0 100 ESR ESR0 Curve 1: 10 V Curve 2: 63 V 1 1 1.6 Curve 1: 10 V Curve 2: 50 V Curve 3: 100 V 2 2 10 1.2 3 0.8 1 1 2 1 2 3 0.4 0 0.1 - 60 - 40 - 20 0 20 40 60 ESR0 = Typical ESR at 20 °C, 100 Hz 80 100 Tamb (°C) 10 120 102 103 104 ESR0 = Typical ESR at 20 °C, 100 Hz Fig. 7 - Multiplier of ESR as a function of ambient temperature 105 Tamb = 20 °C Fig. 8 - Multiplier of ESR as a function of frequency IMPEDANCE (Z) 100 102 Curve 1: Ø 10 mm x 12 mm; 10 V Curve 2: Ø 10 mm x 16 mm; 10 V Curve 3: Ø 12.5 mm x 25 mm; 10 V Curve 4: Ø 16 mm x 25 mm; 10 V Curve 5: Ø 18 mm x 35 mm; 16 V Curve 1: 100 V Curve 2: < 63 V Z Z0 1 10 2 10 1 1 10-1 0 - 60 - 40 - 20 0 20 Z0 = Typical impedance at 20 °C, 100 kHz 40 60 80 100 Tamb (°C) Fig. 9 - Multiplier of impedance as a function of ambient temperature Revision: 12-Apr-13 120 10-2 10 102 103 104 105 Tamb = 20 °C Fig. 10 - Typical impedance as a function of frequency Document Number: 28315 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 148 RUS www.vishay.com Vishay BCcomponents IMPEDANCE (Z) 102 Z (Ω) Curve 1: Curve 2: Curve 3: Curve 4: Curve 5: 1 10 2 Ø 10 mm x 12 mm; 63 V Ø 10 mm x 16 mm; 50 V Ø 12.5 mm x 25 mm; 63 V Ø 16 mm x 25 mm; 50 V Ø 18 mm x 35 mm; 63 V 3 4 1 5 10-1 10-2 102 10 103 104 105 Tamb = 20 °C Fig. 11 - Typical impedance as a function of frequency RIPPLE CURRENT AND USEFUL LIFE CCC206 3.8 IA IR 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.8 Lifetime multiplier 2.6 1. 0 2.4 5 1. 2. 2.2 0 0 3. 0 4. 2.0 0 6. 0 8. 1.8 12 1.6 20 60 Useful life at 105 °C and IR applied: Case Ø D = 10 mm: 2000 h Case Ø D ≥ 12.5 mm: 3000 h 1.2 1.0 0.8 0.5 0.0 (1) 0 10 0 15 0 20 (1) 1.4 30 IA = Actual ripple current at 100 Hz IR = Rated ripple current at 100 Hz, 105 °C 40 50 60 70 80 90 100 110 Tamb (°C) Fig. 12 - Multiplier of useful life as a function of ambient ripple current load Revision: 12-Apr-13 Document Number: 28315 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 148 RUS www.vishay.com Vishay BCcomponents MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY IR MULTIPLIER FREQUENCY (Hz) UR = 6.3 V TO 25 V UR = 35 V UR = 50 V TO 100 V 50 0.95 0.85 0.80 100 1.00 1.00 1.00 300 1.07 1.20 1.25 1000 1.12 1.30 1.40 3000 1.15 1.35 1.50 10 000 1.20 1.40 1.60 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance REFERENCE IEC 60384-4/ EN 130300 subclause 4.13 PROCEDURE (quick reference) REQUIREMENTS Tamb = 105 °C; UR applied Case Ø D = 10 mm: 1000 h Case Ø D 12.5 mm: 2000 h UR = 6.3 V; C/C: + 15 %/- 30 % UR 10 V; C/C: ± 20 % tan 2 x spec. limit Z 2 x spec. limit IL5 spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 105 °C; UR and IR applied Case Ø D = 10 mm: 2000 h Case Ø D 12.5 mm: 3000 h UR = 6.3 V; C/C: + 45 %/- 50 % UR 10 V; C/C: ± 45 % tan 3 x spec. limit Z 3 x spec. limit IL5 spec. limit no short or open circuit total failure percentage: 1 % Shelf life (storage at high temperature) IEC 60384-4/ EN 130300 subclause 4.17 Tamb = 105 °C; no voltage applied; 1000 h After test: UR to be applied for 30 min, 24 h to 48 h before measurement UR = 6.3 V; C/C: + 15 %/- 30 % UR 10 V; C/C: ± 20 % tan 2 x spec. limit Z 2 x spec. limit IL5 2 x spec. limit Surge IEC 60384-4/ EN 130300 subclause 4.14 From source of 1.15 x UR: RC = 0.1 s ± 0.05 s; 1000 cycles of 30 s on, 330 s off, at 105 °C C/C: ± 20 % tan 1.5 x spec. limit IL5 spec. limit Reverse voltage IEC 60384-4/ EN 130300 subclause 4.15 Tamb = 105 °C: 125 h at U = - 1 V, followed by 125 h at UR C/C: ± 15 % tan 1.5 x spec. limit IL5 spec. limit Revision: 12-Apr-13 Document Number: 28315 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000