138 AML www.vishay.com Vishay BCcomponents Aluminum Capacitors Axial Miniature, Long-Life FEATURES • Polarized aluminum non-solid electrolyte electrolytic capacitors, • Axial leads, cylindrical aluminum case, insulated with a blue sleeve (case Ø 6.3 mm x 12.7 mm and 7.7 mm x 12.7 mm are molded with flame retardant plastic material) • Mounting ring version not available in insulated form • Taped versions up to case Ø 15 mm x 30 mm available for automatic insertion • Charge and discharge proof 021 ASM smaller dimensions 118 AHT 120 AT C longer life 138 AML • Long useful life: 2000 h to 10 000 h at 105 °C, high reliability • High ripple current capability • Miniaturized, high CV-product per unit volume Fig. 1 • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) Rated capacitance range, CR 6.3 x 12.7 to 10 x 25 Category temperature range 10 x 30 to 21 x 38 1.0 μF to 15 000 μF ± 20 % Tolerance on CR Rated voltage range, UR APPLICATIONS VALUE 6.3 V to 100 V - 40 °C to + 105 °C Endurance test at 105 °C 1000 h 5000 h Useful life at 105 °C 2000 h 10 000 h Useful life at 40 °C, IR applied Shelf life at 0 V, 105 °C Based on sectional specification Climatic category IEC 60068 Revision: 19-Sep-12 1.3 x IR applied: 1.8 x IR applied: 200 000 h 500 000 h 500 h IEC 60384-4/EN130 300 40/105/56 • Industrial, automotive, EDP and telecommunication • Smoothing, filtering, buffering in SMPS; coupling, decoupling, timing • Portable and mobile equipment (small size, low mass) • Stand-by applications • Low mounting height boards, vibration and shock resistant MARKING The capacitors are marked (where possible) with the following information: • Rated capacitance (in μF) • Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %) • Rated voltage (in V) • Upper category temperature (105 °C) • Date code, in accordance with IEC 60062 • Code for factory of origin • Name of manufacturer • Negative terminal identification • Series number (138) Document Number: 28332 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 138 AML www.vishay.com Vishay BCcomponents SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) CR (μF) 1.0 2.2 4.7 10 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 10 000 15 000 6.3 6.3 x 12.7 7.7 x 12.7 6.5 x 18 10 x 18 10 x 25 - 10 7.7 x 12.7 6.5 x 18 8 x 18 10 x 25 10 x 30 12.5 x 30 15 x 30 18 x 30 18 x 38 18 x 38 21 x 38 16 6.3 x 12.7 6.3 x 12.7 7.7 x 12.7 8 x 18 10 x 18 10 x 30 12.5 x 30 15 x 30 18 x 30 18 x 30 18 x 38 21 x 38 - UR (V) 25 40 6.3 x 12.7 6.3 x 12.7 6.3 x 12.7 7.7 x 12.7 7.7 x 12.7 6.5 x 18 6.5 x 18 8 x 18 10 x 18 10 x 25 10 x 30 10 x 25 12.5 x 30 10 x 30 12.5 x 30 12.5 x 30 15 x 30 15 x 30 18 x 30 18 x 30 18 x 38 18 x 38 21 x 38 18 x 38 21 x 38 - 50 6.3 x 12.7 7.7 x 12.7 10 x 18 - 63 6.3 x 12.7 7.7 x 12.7 6.5 x 18 8 x 18 10 x 25 10 x 30 12.5 x 30 12.5 x 30 15 x 30 18 x 30 18 x 38 21 x 38 - 100 6.3 x 12.7 6.3 x 12.7 7.7 x 12.7 6.5 x 18 8 x 18 10 x 25 10 x 30 12.5 x 30 15 x 30 15 x 30 18 x 30 18 x 38 21 x 38 - DIMENSIONS in millimeters AND AVAILABLE FORMS 63.5 ± 1.5 ØD 73 ± 1.6 ØD L Ød L Ød + F F Form BR: Taped on reel Case Ø D x L = 6.5 mm x 18 mm to 15 mm x 30 mm Form BR: Taped on reel Form BA: Taped in box (ammopack) Case Ø D x L = 6.3 mm x 12.7 mm to 7.7 mm x 12.7 mm Form BA: Taped in box (ammopack) Case Ø D x L = 6.5 mm x 18 mm to 10 mm x 25 mm Fig. 2 - Forms BA and BR Fig. 3 - Forms BA and BR I L 33 ± 1 Ød ØD F Form AA: Axial in box Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm Fig. 4 - Form AA Revision: 19-Sep-12 Document Number: 28332 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 138 AML www.vishay.com Vishay BCcomponents Table 1 AXIAL; DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL (mm) CASE CODE AXIAL: FORM AA, BA, AND BR Ød I Ø Dmax. Lmax. Fmin. MASS (g) PACKAGING QUANTITIES 6.3 x 12.7 (2) 0.6 - 6.5 12.9 17.5 7.7 x 12.7 (3) 0.6 - 7.9 12.9 17.5 6.5 x 18 4 0.8 - 6.9 18.5 25 FORM AA FORM BA FORM BR 1.1 - 1000 1000 1.3 - 500 500 1.3 - 1000 1000 8 x 18 5 0.8 - 8.5 18.5 25 1.7 - 500 500 10 x 18 6 0.8 - 10.5 18.5 25 2.5 - 500 500 10 x 25 7 0.8 - 10.5 25.5 30 3.3 - 500 500 10 x 30 00 0.8 55 ± 1 10.5 30.5 35 4.8 340 - 500 12.5 x 30 01 0.8 55 ± 1 13.0 30.5 35 7.4 260 - 400 15 x 30 02 0.8 55 ± 1 15.5 30.5 35 11.7 200 - 250 18 x 30 03 0.8 55 ± 1 18.5 30.5 35 12.9 120 - - 18 x 38 04 0.8 34 ± 1 18.5 39.5 44 19.0 125 - - 21 x 38 05 0.8 34 ± 1 21.5 39.5 44 24.0 100 - - Note • For detailed tape dimensions refer to packaging information: www.vishay.com/doc?28361 D 120 °C (3 x) 3.6 + 0.2 - 0.2 D3 90° ± 2° (3 x) - L 1.05 + 0.03 (3 x) - 0.1 1.3 + 0 (3 x) - 0.05 d2 1.3 + 0.1 (3 x) 0 + 1.0 1 - 0.5 Mounting holes Ø d1 Case Ø D x L = 15 mm x 30 mm to 21 mm x 38 mm Especially for applications with severe shocks and vibrations Ø D2 Fig. 5 - Mounting hole diagram and outline; Form MR: With mounting ring and pins Table 2 MOUNTING RING; DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL CASE CODE MOUNTING RING: FORM MR Ø d1 Ø d2 Dmax. Ø D2max. D3 Lmax. MASS (g) PACKAGING QUANTITIES 15 x 30 02 0.8 1.0 + 0.4 15.5 17.5 16.5 ± 0.2 33 11.7 200 18 x 30 03 0.8 1.0 + 0.4 18.5 19.5 18.5 ± 0.2 33 12.9 240 18 x 38 04 0.8 1.0 + 0.4 18.5 19.5 18.5 ± 0.2 42 19.0 100 21 x 38 05 0.8 1.0 + 0.4 21.5 22.5 21.5 ± 0.2 42 24.0 100 Revision: 19-Sep-12 Document Number: 28332 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 138 AML www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA SYMBOL Electrolytic capacitor 138 series DESCRIPTION CR Rated capacitance at 100 Hz, tolerance ± 20 % 470 μF/10 V; ± 20 % IR Rated RMS ripple current at 100 Hz, 105 C Nominal case size: Ø 8 mm x 18 mm; Form BA IL5 Max. leakage current after 5 min at UR Ordering code: MAL213834471E3 Former 12 NC: 2222 138 34471 tan Max. dissipation factor at 100 Hz ESR Equivalent series resistance at 100 Hz (calculated from tan max. and CR) Z Max. impedance at 10 kHz or 100 kHz Note • Unless otherwise specified, all electrical values in Table 3 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. Table 3 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 6.3 10 16 25 ORDERING CODE MAL2138....... CR 100 Hz (μF) NOMINAL CASE SIZE ØDxL (mm) IR 100 Hz 105 °C (mA) IL5 5 min (μA) tan 100 Hz ESR 100 Hz () Z 10 kHz () Z 100 kHz () IN BOX FORM AA TAPED ON REEL FORM BR TAPED IN BOX FORM BA MOUNTING RING FORM MR 100 6.3 x 12.7 99 5.3 0.24 3.800 3.000 1.800 - 23101E3 33101E3 - 220 7.7 x 12.7 160 6.8 0.24 1.700 1.400 0.950 - 23221E3 33221E3 - 470 6.5 x 18 250 9.9 0.24 0.810 0.640 0.500 - 23471E3 33471E3 - 1000 10 x 18 430 17 0.24 0.380 0.300 0.240 - 23102E3 33102E3 - 2200 10 x 25 640 32 0.29 0.210 0.180 0.150 - 23222E3 33222E3 - 150 7.7 x 12.7 140 7.0 0.2 2.100 1.300 0.950 - 24151E3 34151E3 - 220 6.5 x 18 190 8.4 0.2 1.400 0.910 0.500 - 24221E3 34221E3 - 470 8 x 18 300 13 0.2 0.680 0.430 0.350 - 24471E3 34471E3 - 1000 10 x 25 520 24 0.2 0.320 0.200 0.160 - 24102E3 34102E3 - 1500 10 x 30 670 34 0.28 0.320 0.260 0.260 14152E3 24152E3 - - 2200 12.5 x 30 890 48 0.29 0.220 0.190 0.190 14222E3 24222E3 - - 3300 15 x 30 1140 70 0.30 0.160 0.130 0.150 14332E3 24332E3 - 44332E3 4700 18 x 30 1450 98 0.33 0.120 0.110 0.130 14472E3 - - 44472E3 6800 18 x 38 1880 140 0.34 0.085 0.074 0.110 14682E3 - - 44682E3 10 000 18 x 38 1980 200 0.41 0.070 0.062 0.100 14103E3 - - 44103E3 15 000 21 x 38 2200 300 0.55 0.063 0.058 0.099 14153E3 - - 44153E3 22 6.3 x 12.7 58 4.7 0.12 8.700 7.300 2.700 - 25229E3 35229E3 - 47 6.3 x 12.7 83 5.5 0.16 5.400 3.400 1.900 - 25479E3 35479E3 - 100 7.7 x 12.7 130 7.2 0.16 2.500 1.600 1.000 - 25101E3 35101E3 - 220 8 x 18 230 11 0.16 1.200 0.730 0.350 - 25221E3 35221E3 470 10 x 18 360 19 0.16 0.540 0.340 0.250 - 25471E3 35471E3 - 1000 10 x 30 630 36 0.20 0.340 0.270 0.260 15102E3 25102E3 - - 1500 12.5 x 30 860 52 0.20 0.230 0.190 0.190 15152E3 25152E3 - - 2200 15 x 30 1090 74 0.21 0.170 0.140 0.150 15222E3 25222E3 - 45222E3 3300 18 x 30 1420 110 0.24 0.120 0.100 0.130 15332E3 - - 45332E3 4700 18 x 30 1480 150 0.28 0.100 0.090 0.120 15472E3 - - 45472E3 6800 18 x 38 1930 220 0.28 0.072 0.062 0.100 15682E3 - - 45682E3 10 000 21 x 38 2100 320 0.38 0.065 0.057 0.098 15103E3 - - 45103E3 10 6.3 x 12.7 46 4.5 0.09 14.000 12.000 2.800 - 26109E3 36109E3 - 22 6.3 x 12.7 61 5.1 0.14 10.000 5.500 2.500 - 26229E3 36229E3 - 33 6.3 x 12.7 74 5.7 0.14 6.800 3.600 1.900 - 26339E3 36339E3 - 47 7.7 x 12.7 96 6.4 0.14 4.700 2.600 1.000 - 26479E3 36479E3 - Revision: 19-Sep-12 Document Number: 28332 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 138 AML www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 25 40 50 63 100 ORDERING CODE MAL2138....... CR 100 Hz (μF) NOMINAL CASE SIZE ØDxL (mm) IR 100 Hz 105 °C (mA) IL5 5 min (μA) tan 100 Hz ESR 100 Hz () Z 10 kHz () Z 100 kHz () IN BOX FORM AA TAPED ON REEL FORM BR TAPED IN BOX FORM BA MOUNTING RING FORM MR 100 220 470 680 1000 1500 2200 3300 4700 6800 33 47 100 220 330 470 680 1000 1500 2200 3300 10 22 100 4.7 10 22 47 100 150 220 330 470 680 1000 1500 1.0 2.2 4.7 10 22 47 68 100 150 220 330 470 680 6.5 x 18 10 x 18 10 x 25 10 x 30 12.5 x 30 15 x 30 18 x 30 18 x 38 18 x 38 21 x 38 7.7 x 12.7 6.5 x 18 8 x 18 10 x 25 10 x 30 12.5 x 30 12.5 x 30 15 x 30 18 x 30 18 x 38 21 x 38 6.3 x 12.7 7.7 x 12.7 10 x 18 6.3 x 12.7 7.7 x 12.7 6.5 x 18 8 x 18 10 x 25 10 x 30 12.5 x 30 12.5 x 30 15 x 30 18 x 30 18 x 38 21 x 38 6.3 x 12.7 6.3 x 12.7 7.7 x 12.7 6.5 x 18 8 x 18 10 x 25 10 x 30 12.5 x 30 15 x 30 15 x 30 18 x 30 18 x 38 21 x 38 160 270 440 580 790 1020 1320 1720 1840 2100 91 120 180 350 490 650 750 970 1250 1640 1810 51 82 230 35 59 100 150 280 410 560 660 860 1130 1460 1680 16 24 40 67 100 190 300 410 550 650 880 1130 1330 9.0 15 28 38 54 79 110 170 240 340 6.6 7.8 12 22 30 42 58 84 120 180 270 5.0 6.2 14 4.6 5.3 6.8 9.9 17 23 32 46 63 90 130 190 4.2 4.4 4.9 6.0 8.4 13 18 24 34 48 70 98 140 0.13 0.13 0.13 0.14 0.15 0.15 0.17 0.17 0.21 0.27 0.11 0.10 0.10 0.10 0.09 0.09 0.10 0.10 0.12 0.12 0.15 0.09 0.09 0.08 0.09 0.08 0.07 0.07 0.07 0.11 0.11 0.12 0.12 0.12 0.12 0.13 0.09 0.09 0.08 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.08 0.08 0.09 2.100 0.940 0.440 0.360 0.250 0.170 0.130 0.090 0.076 0.068 5.300 3.400 1.600 0.720 0.470 0.340 0.250 0.170 0.130 0.093 0.079 14.00 6.500 1.300 30.00 13.00 5.100 2.400 1.100 0.730 0.500 0.370 0.260 0.190 0.130 0.100 140.0 65.00 27.00 11.00 5.100 2.400 1.700 1.100 0.780 0.540 0.380 0.270 0.210 1.200 0.550 0.260 0.260 0.180 0.130 0.100 0.071 0.063 0.058 2.700 1.900 0.900 0.410 0.320 0.230 0.180 0.120 0.098 0.069 0.061 7.000 3.002 0.700 17.000 8.000 3.600 1.700 0.800 0.440 0.310 0.230 0.160 0.120 0.086 0.072 55.000 25.000 17.000 8.000 3.600 1.700 1.100 0.770 0.520 0.370 0.270 0.190 0.140 0.550 0.270 0.170 0.250 0.190 0.150 0.130 0.110 0.100 0.099 1.000 0.650 0.400 0.200 0.300 0.220 0.180 0.140 0.120 0.100 0.100 2.700 1.100 0.300 5.000 1.800 0.850 0.500 0.270 0.400 0.290 0.220 0.160 0.140 0.110 0.110 10.00 8.000 5.000 2.400 1.400 0.670 0.970 0.670 0.460 0.330 0.240 0.170 0.140 16681E3 16102E3 16152E3 16222E3 16332E3 16472E3 16682E3 17331E3 17471E3 17681E3 17102E3 17152E3 17222E3 17332E3 18151E3 18221E3 18331E3 18471E3 18681E3 18102E3 18152E3 19689E3 19101E3 19151E3 19221E3 19331E3 19471E3 19681E3 26101E3 26221E3 26471E3 26681E3 26102E3 26152E3 27339E3 27479E3 27101E3 27221E3 27331E3 27471E3 27681E3 27102E3 21109E3 21229E3 21101E3 28478E3 28109E3 28229E3 28479E3 28101E3 28151E3 28221E3 28331E3 28471E3 29108E3 29228E3 29478E3 29109E3 29229E3 29479E3 29689E3 29101E3 29151E3 29221E3 - 36101E3 36221E3 36471E3 37339E3 37479E3 37101E3 37221E3 31109E3 31229E3 31101E3 38478E3 38109E3 38229E3 38479E3 38101E3 39108E3 39228E3 39478E3 39109E3 39229E3 39479E3 - 46152E3 46222E3 46332E3 46472E3 46682E3 47102E3 47152E3 47222E3 47332E3 48471E3 48681E3 48102E3 48152E3 49151E3 49221E3 49331E3 49471E3 49681E3 Revision: 19-Sep-12 Document Number: 28332 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 138 AML www.vishay.com Vishay BCcomponents ADDITIONAL ELECTRICAL DATA PARAMETER VALUE CONDITIONS AXIAL MOUNTING RING Voltage Us 1.15 x UR Surge voltage Urev 1 V Reverse voltage Current After 1 min at UR: Leakage current Case Ø D x L = 6.3 mm x 12.7 mm and 7.7 mm x 12.7 mm IL1 0.02 CR x UR + 3 μA Case Ø D x L = 6.5 mm x 18 mm to 21 mm x 38 mm IL1 0.006 CR x UR + 4 μA After 5 min at UR IL5 0.002 CR x UR + 4 μA Inductance Case Ø D x L mm: Equivalent series inductance (ESL) 6.3 x 12.7 Typ. 20 nH - 7.7 x 12.7 Typ. 30 nH - 6.5 x 18 Typ. 15 nH - 8 x 18 Typ. 35 nH - 10 x 18 Typ. 69 nH - 10 x 25 Typ. 38 nH - 10 x 30 Typ. 38 nH - 12.5 x 30 Typ. 46 nH - 15 x 30 Typ. 48 nH Typ. 39 nH 18 x 30 Typ. 50 nH Typ. 39 nH 18 x 38 Typ. 54 nH Typ. 39 nH 21 x 38 Typ. 59 nH Typ. 39 nH CAPACITANCE (C) 1 1.1 C C0 1.0 0.9 0.8 1.2 C C0 2 3 4 1 1.1 2 1.0 4 3 2 0.9 2 0.6 1 Curve 1: 6.3 V and 10 V Curve 2: 16 V and 40 V Curve 3: 50 V and 63 V Curve 4: 100 V 0.7 1 Curve 1: 10 V Curve 2: 100 V 0.8 0.7 - 60 - 40 - 20 0 20 40 60 Case Ø D x L = 6.3 mm x 12.7 mm to 10 mm x 25 mm C0 = Typical at 20 °C, 100 Hz 80 100 Tamb (°C) Fig. 6 - Typical multiplier of capacitance as a function of ambient temperature Revision: 19-Sep-12 120 - 60 - 40 - 20 0 20 40 Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm C0 = Typical at 20 °C, 100 Hz 60 80 100 120 Tamb (°C) Fig. 7 - Typical multiplier of capacitance as a function of ambient temperature Document Number: 28332 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 138 AML www.vishay.com Vishay BCcomponents EQUIVALENT SERIES RESISTANCE (ESR) 102 1.2 C C0 1.0 2 ESR ESR 0 Curve 1: 50 V Curve 2: 6.3 V; 63 V; 100 V 1 10 2 0.8 1 1 0.6 1 2 0.4 Curve 1: 10 V Curve 2: 100 V 10 -1 0.2 10 2 10 10 4 103 10 5 f (Hz) C0 = Typical at 20 °C, 100 Hz - 50 0 50 Case Ø D x L = 6.3 mm x 12.7 mm to 10 mm x 25 mm ESR0 = Typical ESR at 20 °C, 100 Hz Fig. 8 - Typical multiplier of capacitance as a function of frequency 100 Tamb (°C) Fig. 9 - Typical multiplier of ESR as a function of ambient temperature 2 10 Curve 1: 6.3 V Curve 2: 100 V ESR ESR0 ESR ESR0 2 1 1 1 1 2 10- 1 - 60 0 - 40 - 20 0 20 40 60 Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm ESR0 = Typical ESR at 20 °C, 100 Hz 80 100 Tamb (°C) Fig. 10 - Typical multiplier of ESR as a function of ambient temperature Revision: 19-Sep-12 120 10 10 2 103 Case Ø D x L = 6.3 mm x 12.7 mm to 10 mm x 25 mm ESR0 = Typical at 20 °C, 100 Hz 10 4 f (Hz) 10 5 Fig. 11 - Typical multiplier ESR as a function of frequency Document Number: 28332 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 138 AML www.vishay.com Vishay BCcomponents EQUIVALENT SERIES RESISTANCE (ESR) 2 Curve 1: 10 V Curve 2: 100 V 2 ESR ESR0 1 1 1 2 0 10 2 10 10 4 103 Case Ø D x L = 10 x 30 to 21 x 38 mm ESR0 = typical ESR at 20 °C, 100 Hz 10 5 f (Hz) Fig. 12 - Typical multiplier ESR as a function of frequency IMPEDANCE (Z) Table 4 IMPEDANCE VS. CAPACITANCE VALUES (Case Ø D x L = 6.3 mm x 12.7 mm to 10 mm x 25 mm) Z x CR ( x μF) AT 10 kHz Tamb 6.3 V 10 V 16 V 25 V 40 V 50 V 63 V 100 V 300 200 160 120 90 70 80 80 - 25 °C 2000 1200 750 560 450 300 550 550 - 40 °C 5500 3200 2000 1500 1200 900 1500 1500 + 20 °C 10 Z Z0 103 Curve 1: 10 µF, 63 V Curve 2: 10 µF, 50 V Curve 3: 22 µF, 63 V Curve 4: 47 µF, 25 V Curve 5: 100 µF, 16 V Curve 6: 100 µF, 25 V Curve 7: 220 µF, 10 V Curve 8: 470 µF, 6.3 V Z (Ω) 102 1 10 3 4 5 6 7 8 -1 10 1 10-2 1 2 10-1 - 60 - 40 - 20 0 20 40 60 Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm 80 100 Tamb (°C) Fig. 13 - Typical multiplier of ESR as a function of ambient temperature at 10 kHz Revision: 19-Sep-12 120 10 2 103 10 4 Case Ø D x L = 6.3 mm x 12.7 mm to 6.5 mm x 18 mm 10 5 f (Hz) 10 6 Tamb (°C) Fig. 14 - Typical impedance as a function of frequency Document Number: 28332 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 138 AML www.vishay.com Vishay BCcomponents 102 103 Curve 1: 47 µF, 63 V Curve 2: 100 µF, 50 V Curve 3: 100 µF, 63 V Curve 4: 220 µF, 25 V Curve 5: 470 µF, 16 V Curve 6: 1000 µF, 25 V Curve 7: 1000 µF, 10 V Curve 8: 2200 µF, 6.3 V Z (Ω) 102 10 10 1 1 -1 1 10 Curve 1: 680 µF; 25 V Curve 2: 4700 µF; 25 V Curve 3: 6800 µF; 25 V Z (Ω) 10 1 2 3 4 5 6 7 8 -1 10 102 2 3 10-2 10 3 10 4 Case Ø D x L = 8 mm x 18 mm to 10 mm x 25 mm f (Hz) 10 5 Tamb (°C) 10 2 103 10 4 10 5 Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm Fig. 15 - Typical impedance as a function of frequency f (Hz) 10 6 Tamb (°C) Fig. 16 - Typical impedance as a function of frequency 102 102 Curve 1: 680 µF; 25 V Curve 2: 4700 µF; 25 V Curve 3: 6800 µF; 25 V Z (Ω) 10 Curve 1: 680 µF; 25 V Curve 2: 4700 µF; 25 V Curve 3: 6800 µF; 25 V Z (Ω) 10 1 1 1 1 2 3 -1 10 2 3 -1 10 10-2 10-2 10 2 3 10 10 4 Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm 10 5 f (Hz) Tamb (°C) Fig. 17 - Typical impedance as a function of frequency Revision: 19-Sep-12 10 6 10 2 103 10 4 Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm 10 5 f (Hz) 10 6 Tamb (40 °C) Fig. 18 - Typical impedance as a function of frequency Document Number: 28332 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 138 AML www.vishay.com Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE CCC206 3.8 IA IR 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.8 Lifetime multiplier 2.6 0 1. 2.4 5 1. 0 2. 2.2 0 3. 0 4. 2.0 0 6. 0 8. 1.8 12 1.6 20 60 Useful life at 105 °C and IR applied: Case Ø D x L = 6.3 mm x 12.7 mm to 10 mm x 25 mm: 2000 h Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm: 10 000 h (1) 0 10 0 15 0 20 (1) 1.2 1.0 0.8 0.5 0.0 30 1.4 IA = Actual ripple current at 100 Hz IR = Rated ripple current at 100 Hz, 105 °C 40 50 60 70 80 90 100 110 Tamb (°C) Fig. 19 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 5 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) IR MULTIPLIER UR = 6.3 V TO 10 V UR = 16 V TO 25 V UR = 40 V TO 100 V 50 0.95 0.90 0.85 100 1.00 1.00 1.00 300 1.07 1.12 1.20 1000 1.12 1.20 1.30 3000 1.15 1.25 1.35 10 000 1.20 1.30 1.40 Revision: 19-Sep-12 Document Number: 28332 10 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 138 AML www.vishay.com Vishay BCcomponents Table 6 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST IEC 60384-4/ Endurance PROCEDURE (quick reference) REFERENCE EN130300 subclause 4.13 Tamb = 105 °C; UR applied; Case Ø D x L: 6.3 mm x 12.7 mm to 10 mm x 25 mm: 1000 h; 10 mm x 30 mm to 21 mm x 38 mm: 5000 h REQUIREMENTS UR 6.3 V; C/C: + 15 %/- 30 % UR 6.3 V; C/C: ± 15 % tan 1.3 x spec. limit Z 2 x spec. limit IL5 spec. limit UR 6.3 V; C/C: + 45 %/- 50 % Tamb = 105 °C; UR and IR applied; Useful life CECC 30301 Case Ø D x L: subclause 1.8.1 6.3 mm x 12.7 mm to 10 mm x 25 mm: 2000 h; 10 mm x 30 mm to 21 mm x 38 mm: 10 000 h UR 6.3 V; C/C: ± 45 % tan 3 x spec. limit Z 3 x spec. limit IL5 spec. limit no short open circuit total failure percentage: 1 % Shelf life IEC 60384-4/ (storage at EN130300, high temperature) subclause 4.17 Revision: 19-Sep-12 Tamb = 105 °C; no voltage applied; C/C, tan , Z: 500 h For requirements After test: UR to be applied for 30 min, see “Endurance test” above 24 h to 48 h before measurement IL5 2 x spec. limit Document Number: 28332 11 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000