LH1532FP, LH1532FPTR www.vishay.com Vishay Semiconductors Dual 1 Form A Solid State Relay FEATURES 8 1 S1 • Solid-state relay (equivalent to AQW210S) - Typical RON 20 2 7 3 6 4 5 S1' - Load voltage 350 V S2 - Load current 120 mA - Current limit protection - High surge capability S2' i179050-1 - Clean bounce free switching - Low power consumption - High reliability monolithic receptor DESCRIPTION • Two independent relays in a single package The LH1532FP is a dual 1 form A (SPST) which can replace electromechanical relays in many applications. They are constructed using a GaAlAs LED for activation control and an integrated monolithic die for the switch output. The die is comprised of a photodiode array, switch control circuity and MOSFET switches. The SSR features low on-resistance, high breakdown voltage and current-limit circuitry that protects the relay from telephone line induced lightning surges. • Package - flat pak • Isolation test voltage, 3000 VRMS • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC APPLICATIONS • General telecom switching - On/off hook control - Ring relay AGENCY APPROVALS - Ground start UL1577: file no. E52744 system code O DIN EN: 60747-5-2 (VDE 0884)/60747-5-5 (pending), available with option 1 FIMKO: approval • Industrial controls - Triac predriver - Output modules • Peripherals - Transducer driver • Instrumentation - Automatic tuning/balancing - Flying capacitor - Analog multiplexing Note • See “solid state relays” (application note 56) ORDERING INFORMATION SMD-# L H 1 5 3 PART NUMBER 2 F P PACKAGE CONFIG. T R TAPE AND REEL PACKAGE UL, FIMKO SOP-8, tubes LH1532FP SOP-8, tape and reel Rev. 1.6, 07-Jul-11 7 mm LH1532FPTR 1 Document Number: 83830 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LH1532FP, LH1532FPTR www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT IF 50 mA IR 10 μA VR 6 V IL 50 μA VL 350 V IL 120 mA INPUT LED continuous forward current LED reverse voltage OUTPUT DC or peak AC load voltage Continuous DC load current SSR Ambient temperature range Tamb - 40 to + 85 °C Storage temperature range Tstg - 40 to + 125 °C Soldering temperature (1) Isolation test voltage Isolation resistance t = 10 s max. Tsld 260 °C t=1s VISO 3000 VRMS VIO = 500 V, Tamb = 25 °C RIO 1012 VIO = 500 V, Tamb = 100 °C RIO 1011 Ptot 600 mW Total power dissipation Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices. ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. LED forward current, switch turn-on IL = 100 mA, t = 10 ms IFon LED forward current, switch turn-off VL = ± 300 V IFoff 0.2 IF = 10 mA VF 1 TYP. MAX. UNIT 1.2 3 mA 1.22 1.5 25 INPUT LED forward voltage mA V OUTPUT On-resistance IF = 5 mA, IL = ± 50 mA RON 20 Off-resistance IF = 0 mA, VL = ± 100 V ROFF 5000 Current limit Output off-state leakage current Output capacitance Pole-to-pole capacitance (S1 to S2) IF = 5 mA, t = 5 ms ILimit IF = 0 mA, VL = ± 100 V IO IF = 0 mA, VL = ± 350 V IO IF = 0 mA, VL = ± 1 V CO 170 IF = 5 mA G 210 250 0.6 200 mA nA 1 μA 55 pF 0.5 pF 0.15 μV TRANSFER Switch offset IF = 5 mA VOS Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Turn-on time IF = 5 mA, IL = 50 mA Turn-off time IF = 5 mA, IL = 50 mA Rev. 1.6, 07-Jul-11 SYMBOL MIN. TYP. MAX. UNIT ton 1.1 2.5 ms toff 0.06 2.5 ms 2 Document Number: 83830 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LH1532FP, LH1532FPTR www.vishay.com Vishay Semiconductors Change in Breakdown Voltage (%) Normalized to 25 °C LED Forward Current for Switch Turn-on (%), Normalized to 25 °C TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 100 80 IL = 100 mA 60 40 20 0 - 20 - 40 - 60 - 40 ilh1532fp_01 - 20 0 20 40 60 80 IF = 5.0 mA IL = 50 mA 20 10 0 - 10 - 20 -6 -8 - 40 - 20 0 20 40 60 80 Ambient Temperature (°C) 50 40 30 20 10 0 - 20 0 20 40 60 80 0 Ambient Temperature (°C) ilh1532fp_05 20 60 40 80 100 Applied Voltage (V) Fig. 5 - Switch Capacitance vs. Applied Voltage Fig. 2 - On-Resistance vs. Temperature 40 80 IF = 5.0 mA t = 5.0 ms VL = see elec. char. 30 20 Off-state Leakage Current (nA) Change in Current Limit (%) Normalized to 25 °C -4 60 - 30 10 0 - 10 - 20 - 30 - 20 0 20 40 60 70 T = 25 °C 60 50 40 30 20 10 0 80 0 Ambient Temperature (°C) 100 17321 200 300 400 Load Voltage (V) Fig. 6 - Leakage Current vs. Applied Voltage Fig. 3 - Current Limit vs. Temperature Rev. 1.6, 07-Jul-11 0 -2 70 Capacitance (pF) Change in Ron (%) 30 ilh1532fp_03 2 80 40 - 40 - 40 4 Fig. 4 - Switch Breakdown Voltage vs. Temperature Fig. 1 - LED Current for Switch Turn-on vs. Temperature ilh1532fp_02 6 ilh1532fp_04 Ambient Temperature (°C) - 40 - 40 8 3 Document Number: 83830 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LH1532FP, LH1532FPTR www.vishay.com Vishay Semiconductors Off-state Leakage Current (nA) 140 120 100 T = 85 °C 80 T = 75 °C 60 40 T = 50 °C 20 0 0 100 17322 200 300 400 Load Voltage (V) Fig. 7 - Leakage Current vs. Applied Voltage at Elevated Temperatures 80 IF = 10 mA IF = 8.0 mA Change in Toff (%) Normalized to 25 °C 60 IF = 6.0 mA 40 20 0 - 20 IF = 5.0 mA - 40 IF = 4.0 mA IF = 3.0 mA IF = 2.0 mA - 60 - 80 - 40 - 20 ilh1532fp_08 0 20 40 60 80 Ambient Temperature (°C) Fig. 8 - Turn-off Time vs. Temperature 7 6 Ton (ms) 5 4 3 T = 85 °C T = 25 °C T = - 40 °C 2 1 0 0 ilh1532fp_09 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) Fig. 9 - Turn-on Time vs. LED Current Rev. 1.6, 07-Jul-11 4 Document Number: 83830 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LH1532FP, LH1532FPTR www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 0.74 Detail A (not to scale) pin one ID 3 2.1 1 . 04 4.57 ISO method A 0.51 0.25 9.5 typ. 6.96 5.48 See detail A 0.39 40° 0.000 to 0.102 0.25 typ. 2.03 0.41 Lead coplarity 0.1 max. 2.54 0.5 3° to 7° i178024 PACKAGE MARKING (example) LH1532 V YWW O 68 Note • Tape and reel suffix (TR) is not part of the package marking. Rev. 1.6, 07-Jul-11 5 Document Number: 83830 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1