FXLA108 Low-Voltage Dual-Supply 8-Bit Voltage Translator with Configurable Voltage Supplies and Signal Levels, 3-State Outputs, and Auto Direction Sensing Features Description Bi-Directional Interface between Two Levels: from 1.1V to 3.6V Fully Configurable: Inputs and Outputs Track VCC The FXLA108 is a configurable dual-voltage supply translator for both uni-directional and bi-directional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A port tracks the VCCA level and the B port tracks the VCCB level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. Non-Preferential Power-Up; Either VCC May Be Powered Up First Outputs Switch to 3-State if Either VCC is at GND Control Input (/OE) Referenced to VCCA Voltage ESD Protection Exceeds: - 8kV HBM (per JESD22-A114 &Mil Std 883e 3015.7) - 2kV CDM (per ESD STM 5.3) Power-Off Protection Bus-Hold on Data Inputs Eliminates the Need for Pull-Up Resistors; Do Not Use Pull-Up Resistors on A or B Ports Packaged in 20-Terminal DQFN (2.5mm x 4.5mm) Direction Control Not Necessary 100Mbps Throughput when Translating Between 1.8V and 2.5V The device remains in three-state as long as either VCC=0V, allowing either VCC to be powered up first. Internal power-down control circuits place the device in 3-state if either VCC is removed. The /OE input, when HIGH, disables both the A and B ports by placing them in a 3-state condition. The /OE input is supplied by VCCA. The FXLA108 supports bi-directional translation without the need for a direction control pin. The two ports of the device have auto-direction sense capability. Either port may sense an input signal and transfer it as an output signal to the other port. Applications Laptops, Notebooks, Routers, Switches Ordering Information Part Number FXLA108BQX Operating Temperature Range -40 to 85°C © 2009 Fairchild Semiconductor Corporation FXLA108 • Rev. 1.0.5 Package 20-Terminal DQFN 2.5mm x 4.5mm Package Packing Method 3K Units Tape and Reel www.fairchildsemi.com FXLA108 — Low-Voltage Dual-Supply 8-Bit Voltage Translator March 2012 VCCA VCC 2 1 A0 2 1 B0 A1 3 18 B1 A2 4 17 B2 A3 5 16 B3 A4 6 15 B4 A5 7 1 B5 A6 8 13 A7 9 1 B7 10 B6 11 GND /OE Figure 1. Pin Configuration (Top Through View) Pin Definitions Pin # Name Description 1 VCCA 2 A0 A-Side Inputs or 3-State Outputs 3 A1 A-Side Inputs or 3-State Outputs 4 A2 A-Side Inputs or 3-State Outputs 5 A3 A-Side Inputs or 3-State Outputs 6 A4 A-Side Inputs or 3-State Outputs 7 A5 A-Side Inputs or 3-State Outputs 8 A6 A-Side Inputs or 3-State Outputs 9 A7 A-Side Inputs or 3-State Outputs 10 GND Ground 11 /OE Output Enable Input 12 B7 B-Side Inputs or 3-State Outputs 13 B6 B-Side Inputs or 3-State Outputs 14 B5 B-Side Inputs or 3-State Outputs 15 B4 B-Side Inputs or 3-State Outputs 16 B3 B-Side Inputs or 3-State Outputs 17 B2 B-Side Inputs or 3-State Outputs 18 B1 B-Side Inputs or 3-State Outputs 19 B0 B-Side Inputs or 3-State Outputs 20 VCCB DAP NC FXLA108 — Low-Voltage Dual-Supply 8-Bit Voltage Translator Pin Configuration A-Side Power Supply B-Side Power Supply No Connect © 2009 Fairchild Semiconductor Corporation FXLA108 • Rev. 1.0.5 www.fairchildsemi.com 2 FXLA108 — Low-Voltage Dual-Supply 8-Bit Voltage Translator Functional Diagram Figure 2. Functional Diagram Function Table Control Outputs /OE LOW Logic Level Normal Operation HIGH Logic Level 3-State © 2009 Fairchild Semiconductor Corporation FXLA108 • Rev. 1.0.5 www.fairchildsemi.com 3 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC Parameter Supply Voltage VI DC Input Voltage VO (2) Output Voltage IIK DC Input Diode Current IOK DC Output Diode Current IOH/IOL ICC TSTG PD ESD Conditions Min. Max. VCCA -0.5 4.6 VCCB -0.5 4.6 I/O Ports A and B -0.5 4.6 Control Input (/OE) -0.5 4.6 Output 3-State -0.5 4.6 Output Active (An) -0.5 VCCA +0.5 Output Active (Bn) -0.5 VCCB +0.5 VI<0V -50 VO<0V -50 VO>VCC +50 DC Output Source/Sink Current -50 DC VCC or Ground Current (per Supply Pin) Storage Temperature Range -65 Unit V V V mA mA +50 mA ±100 mA +150 °C Power Dissipation 35 mW Human Body Model, JESD22-A114 8 Charged Device Model, JESD22-C101 2 kV Notes: 1. IO absolute maximum ratings must be observed. 2. All unused inputs and input/outputs must be held at VCCi or GND. FXLA108 — Low-Voltage Dual-Supply 8-Bit Voltage Translator Absolute Maximum Ratings Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter VCC Power Supply VIN Input Voltage TA Operating Temperature, Free Air dt/dV Minimum Input Edge Rate Conditions Operating VCCA or VCCB Min. Max. Unit 1.1 3.6 V Ports A and B 0 3.6 V Control Input (/OE) 0 VCCA V -40 +85 °C 10 ns/V ΘJA Thermal Resistance: Junction-to-Ambient 50 °C/W ΘJC Thermal Resistance: Junction-to-Case 23 °C/W © 2009 Fairchild Semiconductor Corporation FXLA108 • Rev. 1.0.5 VCCA/B = 1.1 to 3.6V www.fairchildsemi.com 4 The recommended power-down sequence is: FXL translators offer an advantage in that either VCC may be powered up first. This benefit derives from the chip design. When either VCC is at 0V, outputs are in a high-impedance state. The control input (/OE) is designed to track the VCCA supply. A pull-up resistor tying /OE to VCCA should be used to ensure that bus contention, excessive currents, or oscillations do not occur during power-up or power-down. The size of the pull-up resistor is based upon the current-sinking capability of the device driving the /OE pin. 1. 2. 3. Pull-Up/Pull-Down Resistors Do not use pull-up or pull-down resistors. This device has bus-hold circuits: pull-up or pull-down resistors are not recommended because they interfere with the output state. The current through these resistors may exceed the hold drive, II(HOLD) and/or II(OD) bus-hold currents. The bus-hold feature eliminates the need for extra resistors. The recommended power-up sequence is: 1. 2. 3. Apply power to the first VCC. Apply power to the second VCC. Drive the /OE input LOW to enable the device. © 2009 Fairchild Semiconductor Corporation FXLA108 • Rev. 1.0.5 Drive /OE input HIGH to disable the device. Remove power from either VCC. Remove power from other VCC. FXLA108 — Low-Voltage Dual-Supply 8-Bit Voltage Translator Power-Up/Power-Down Sequence www.fairchildsemi.com 5 TA=-40 to 85°C. Symbol Parameter Conditions Data Inputs An Control Pin /OE VIHA High-Level Input Voltage VCCA (V) VCCB (V) 2.70 to 3.60 2.00 2.30 to 2.70 1.60 1.65 to 2.30 1.10 to 3.60 .65xVCCA 1.40 to 1.65 .65xVCCA 1.10 to 1.40 .90xVCCA 2.70 to 3.60 2.30 to 2.70 VIHB Data Inputs Bn Data Inputs An Control Pin /OE VILA Low-Level Input Voltage Min. Typ. 2.00 1.60 1.10 to 3.60 1.65 to 2.30 .65xVCCB 1.40 to 1.65 .65xVCCB 1.10 to 1.40 .90xVCCB V 2.70 to 3.60 .80 2.30 to 2.70 .70 1.65 to 2.30 1.10 to 3.60 .35xVCCA 1.40 to 1.65 .35xVCCA 1.10 to 1.40 .10xVCCA 2.70 to 3.60 VOHA VOHB VOLA VOLB II(HOLD) Data Inputs Bn Unit s V V .80 2.30 to 2.70 VILB Max. .70 1.10 to 3.60 1.65 to 2.30 .35xVCCB 1.40 to 1.65 .35xVCCB 1.10 to 1.40 .10xVCCB High-Level Output Voltage(3) IOH=-4µA 1.10 to 3.60 1.10 to 3.60 VCCA - .40 IOH=-4µA 1.10 to 3.60 1.10 to 3.60 VCCB - .40 Low-Level Output (3) Voltage IOL=4µA 1.10 to 3.60 1.10 to 3.60 .4 IOL=4µA 1.10 to 3.60 1.10 to 3.60 .4 V FXLA108 — Low-Voltage Dual-Supply 8-Bit Voltage Translator DC Electrical Characteristics V VIN=0.80V 3.00 3.00 75.0 VIN=2.00V 3.00 3.00 -75.0 VIN=0.7V 2.30 2.30 45.0 VIN=1.60V 2.30 2.30 -45.0 Bus-Hold Input Minimum VIN=0.57V Drive Current VIN=1.07V 1.65 1.65 25.0 1.65 1.65 -25.0 VIN=0.49V 1.40 1.40 11.0 VIN=0.91V 1.40 1.40 -11.0 VIN=0.11V 1.10 1.10 4.0 VIN=0.99V 1.10 1.10 -4.0 V µA Continued on following page… © 2009 Fairchild Semiconductor Corporation FXLA108 • Rev. 1.0.5 www.fairchildsemi.com 6 TA=-40 to 85°C. Symbol II(ODH) II(ODL) II IOFF IOZ ICCA/B ICCZ Parameter Bus-Hold Input Overdrive High Current(4) Conditions VCCA (V) VCCB (V) Min. 3.60 3.60 450.00 2.70 2.70 300.00 1.95 1.95 200.00 1.60 1.60 120.00 1.40 1.40 80.00 3.60 3.60 -450.00 2.70 2.70 -300.00 1.95 1.95 -200.00 1.60 1.60 -120.00 1.40 1.40 -80.00 1.10 to 3.60 3.60 ±1.0 An VO=0V to 3.6V 0 3.6 ±2.0 Bn VO=0V to 3.6V 3.60 0 ±2.0 An, Bn VO=0V or 3.6V, /OE=VIH 3.6 3.60 ±5.0 An VO=0V or 3.6V, /OE=GND 3.60 0 ±5.0 Bn VO=0V or 3.6V, /OE=GND 0 3.60 ±5.0 Data Inputs An, Bn Bus-Hold Input Overdrive Low Current(5) Data Inputs An, Bn Input Leakage Current Control Inputs /OE, VI=VCCA or GND Power-Off Leakage Current 3-State Output Leakage Quiescent Supply Current(6, 7) ICCA Quiescent Supply Current ICCB Max. Units µA µA µA µA µA VI=VCCI or GND; IO=0, /OE=GND 1.10 to 3.60 1.10 to 3.60 10.0 µA VI=VCCI or GND; IO=0, /OE=VIH 1.10 to 3.60 1.10 to 3.60 10.0 µA VI=VCCB or GND; IO=0 B-to-A Direction, /OE=GND 0 VI=VCCA or GND; IO=0 A-to-B Direction 1.10 to 3.60 0 10.0 VI=VCCA or GND; IO=0, A-to-B Direction, /OE=GND 1.10 to 3.60 0 -10.0 VI=VCCB or GND; IO=0 B-to-A Direction 0 1.10 to 3.60 FXLA108 — Low-Voltage Dual-Supply 8-Bit Voltage Translator DC Electrical Characteristics (Continued) -10.0 µA µA 1.10 to 3.60 10.0 Notes: 3. This is the output voltage for static conditions. Dynamic drive specifications are given in the Dynamic Output Electrical Characteristics table. 4. An external drive must source at least the specified current to switch LOW-to-HIGH. 5. An external drive must source at least the specified current to switch HIGH-to-LOW. 6. VCCI is the VCC associated with the input side. 7. Reflects current per supply, VCCA or VCCB. © 2009 Fairchild Semiconductor Corporation FXLA108 • Rev. 1.0.5 www.fairchildsemi.com 7 A Port (An) Output Load: CL=15pF, RL ≥ MΩ (CI/O=4pF), TA=-40 to 85°C Symbol Parameter VCCA=3.0V to 3.6V Typ. Max. VCCA=2.3V to 2.7V Typ. VCCA=1.65V to 1.95V Max. Typ. Max VCCA=1.4V to 1.6V Typ. VCCA=1.1V to 1.3V Max. Typ. Units trise Output Rise Time A Port(9) 3.0 3.5 4.0 5.0 7.5 ns tfall Output Fall Time A Port(10) 3.0 3.5 4.0 5.0 7.5 ns IOHD Dynamic Output Current High(9) -11.4 -7.5 -4.7 -3.2 -1.7 mA IOLD Dynamic Output Current Low(10) +11.4 +7.5 +4.7 +3.2 +1.7 mA VCCB=1.1V to 1.3V Units B Port (Bn) Output Load: CL=15pF, RL ≥ MΩ (CI/O=5pF), TA=-40 to 85°C Symbol Parameter VCCB=3.0V to 3.6V Typ. Max. VCCB=2.3V to 2.7V Typ. VCCB=1.65V to 1.95V Max. Typ. Max VCCB=1.4V to 1.6V Typ. Max. Typ. trise Output Rise Time B Port(9) 3.0 3.5 4.0 5.0 7.5 ns tfall Output Fall Time B Port(10) 3.0 3.5 4.0 5.0 7.5 ns IOHD Dynamic Output Current High(9) -12.0 -7.9 -5.0 -3.4 -1.8 mA IOLD Dynamic Output Current Low(10) +12.0 +7.9 +5.0 +3.4 +1.8 mA FXLA108 — Low-Voltage Dual-Supply 8-Bit Voltage Translator Dynamic Output Electrical Characteristic Notes: 8. Dynamic output characteristics are guaranteed, but not tested. 9. See Figure 7. 10. See Figure 8. © 2009 Fairchild Semiconductor Corporation FXLA108 • Rev. 1.0.5 www.fairchildsemi.com 8 VCCA = 3.0V to 3.6V, TA=-40 to 85°C Symbol tPLH,tPHL Parameter VCCB=3.0V to 3.6V VCCB=2.3V to 2.7V VCCB=1.65V to 1.95V VCCB=1.4V to 1.6V VCCB=1.1V to 1.3V Units Min. Max. Min. Max. Min. Max Min. Max. Typ. A to B 0.2 4.0 0.3 4.2 0.5 5.4 0.6 6.8 6.9 ns B to A 0.2 4.0 0.2 4.1 0.3 5.0 0.5 6.0 4.5 ns tPZL,tPZH /OE to A, /OE to B 1.7 1.7 1.7 1.7 1.7 µs tSKEW A Port, (11) B Port 0.5 0.5 0.5 1.0 1.0 ns VCCB=1.1V to 1.3V Units VCCA = 2.3V to 2.7V, TA=-40 to 85°C Symbol tPLH,tPHL Parameter VCCB=3.0V to 3.6V VCCB=2.3V to 2.7V VCCB=1.65V to 1.95V VCCB=1.4V to 1.6V Min. Max. Min. Max. Min. Max Min. Max. Typ. A to B 0.2 4.1 0.4 4.5 0.5 5.6 0.8 6.9 7.0 ns B to A 0.3 4.2 0.4 4.5 0.5 5.5 0.5 6.5 4.8 ns tPZL,tPZH /OE to A, /OE to B 1.7 1.7 1.7 1.7 1.7 µs tSKEW A Port, (11) B Port 0.5 0.5 0.5 1.0 1.0 ns VCCB=1.1V to 1.3V Units FXLA108 — Low-Voltage Dual-Supply 8-Bit Voltage Translator AC Characteristics VCCA = 1.65V to 1.95V, TA=-40 to 85°C Symbol tPLH,tPHL Parameter VCCB=3.0V to 3.6V VCCB=2.3V to 2.7V VCCB=1.65V to 1.95V VCCB=1.4V to 1.6V Min. Max. Min. Max. Min. Max Min. Max. Typ. A to B 0.3 5.0 0.5 5.5 0.8 6.7 0.9 7.5 7.5 ns B to A 0.5 5.4 0.5 5.6 0.8 6.7 1.0 7.0 5.4 ns tPZL,tPZH /OE to A, /OE to B 1.7 1.7 1.7 1.7 1.7 µs tSKEW A Port, B Port(11) 0.5 0.5 0.5 1.0 1.0 ns Note: 11. Skew is the variation of propagation delay between output signals and applies only to output signals on the same port (An or Bn) and switching with the same polarity (LOW-to-HIGH or HIGH-to-LOW) (see Figure 10). Skew is guaranteed, but not tested. © 2009 Fairchild Semiconductor Corporation FXLA108 • Rev. 1.0.5 www.fairchildsemi.com 9 VCCA = 1.4V to 1.6V, TA=-40 to 85°C Symbol tPLH,tPHL VCCB=3.0V to 3.6V Parameter VCCB=2.3V to 2.7V VCCB=1.65V to 1.95V VCCB=1.4V to 1.6V VCCB=1.1V to 1.3V Units Min. Max. Min. Max. Min. Max Min. Max. Typ. A to B 0.5 6.0 0.5 6.5 1.0 7.0 1.0 8.5 7.9 ns B to A 0.6 6.8 0.8 6.9 0.9 7.5 1.0 8.5 6.1 ns tPZL,tPZH /OE to A, /OE to B 1.7 1.7 1.7 1.7 1.7 µs tSKEW A Port, (12) B Port 1.0 1.0 1.0 1.0 1.0 ns Units VCCA = 1.1V to 1.3V, TA=-40 to 85°C Symbol tPLH,tPHL tPZL,tPZH tSKEW Parameter A to B VCCB=3.0V to 3.6V VCCB=2.3V to 2.7V VCCB=1.65V to 1.95V VCCB=1.4V to 1.6V VCCB=1.1V to 1.3V Typ. Typ. Typ. Typ. Typ. 4.6 4.8 5.4 6.2 9.2 ns B to A 6.8 7.0 7.4 7.8 9.1 ns /OE to A, /OE to B 1.7 1.7 1.7 1.7 1.7 µs A Port, B Port(12) 1.0 1.0 1.0 1.0 1.0 ns Note: 12. Skew is the variation of propagation delay between output signals and applies only to output signals on the same port (An or Bn) and switching with the same polarity (LOW-to-HIGH or HIGH-to-LOW) (see Figure 10). Skew is guaranteed, but not tested. © 2009 Fairchild Semiconductor Corporation FXLA108 • Rev. 1.0.5 FXLA108 — Low-Voltage Dual-Supply 8-Bit Voltage Translator AC Characteristics (Continued) www.fairchildsemi.com 10 TA=-40 to 85°C. VCCB=3.0V to 3.6V VCCB=2.3V to 2.7V VCCB=1.65V to 1.95V VCCB=1.4V to 1.6V VCCB=1.1V to 1.3V Min. Min. Min. Min. Typ. VCCA=3.00V to 3.60V 140 120 100 80 40 Mbps VCCA=2.30V to 2.70V 120 120 100 80 40 Mbps VCCA=1.65V to 1.95V 100 100 80 60 40 Mbps VCCA=1.40V to 1.60V 80 80 60 60 40 Mbps Typ. Typ. Typ. Typ. Typ. 40 40 40 40 40 VCCA VCCA=1.10V to 1.30V Units Mbps Notes: 13. Maximum data rate is guaranteed, but not tested. 14. Maximum data rate is specified in megabits per second (see Figure 9). It is equivalent to two times the F-toggle frequency, specified in megahertz. For example, 100Mbps is equivalent to 50MHz. Capacitance Symbol CIN Parameter Conditions Input Capacitance Control Pin (/OE) An CI/O Input/Output Capacitance Cpd Power Dissipation Capacitance © 2009 Fairchild Semiconductor Corporation FXLA108 • Rev. 1.0.5 Bn VCCA=VCCB=GND VCCA=VCCB=3.3V, /OE=VCCA VCCA=VCCB=3.3V, VI=0V or VCC, f=10MHz TA=+25°C Typical Units 3 pF 4 5 25 FXLA108 — Low-Voltage Dual-Supply 8-Bit Voltage Translator Maximum Data Rate pF pF www.fairchildsemi.com 11 bus hold can be over ridden in the event of a direction change. The strong driver allows the FXLA108 to quickly charge and discharge capacitive transmission lines during dynamic mode. Static mode conserves power, where ICC is typically < 5µA. The FXLA108 I/O architecture benefits the end user, beyond level translation, in the following three ways: Auto Direction without an external direction pin. Drive Capacitive Loads. Automatically shifts to a higher current drive mode only during “Dynamic Mode” or HL / LH transitions. Bus Hold Minimum Drive Current Specifies the minimum amount of current the bus hold driver can source/sink. The bus hold minimum drive current (IIHOLD) is VCC dependent and guaranteed in the DC Electrical tables. The intent is to maintain a valid output state in a static mode, but that can be overridden when an input data transition occurs. Lower Power Consumption. Automatically shifts to low-power mode during “Static Mode” (no transitions), lowering power consumption. The FXLA108 does not require a direction pin. Instead, the I/O architecture detects input transitions on both side and automatically transfers the data to the corresponding output. For example, for a given channel, if both A and B side are at a static LOW, the direction has been established as A B, and a LH transition occurs on the B port; the FXLA108 internal I/O architecture automatically changes direction from A B to B A. Bus Hold Input Overdrive Drive Current Specifies the minimum amount of current required (by an external device) to overdrive the bus hold in the event of a direction change. The bus hold overdrive (IIODH, IIODL) is VCC dependent and guaranteed in the DC Electrical tables. During HL / LH transitions, or “Dynamic Mode,” a strong output driver drives the output channel in parallel with a weak output driver. After a typical delay of approximately 10ns – 50ns, the strong driver is turned off, leaving the weak driver enabled for holding the logic state of the channel. This weak driver is called the “bus hold.” “Static Mode” is when only the bus hold drives the channel. The © 2009 Fairchild Semiconductor Corporation FXLA108 • Rev. 1.0.5 Dynamic Output Current The strength of the output driver during LH / HL transitions is referenced on page 8, Dynamic Output Electrical Characteristics, IOHD, and IOLD. FXLA108 — Low-Voltage Dual-Supply 8-Bit Voltage Translator I/O Architecture Benefit www.fairchildsemi.com 12 VCC TEST SIGNAL DUT C1 R1 Figure 3. Test Circuit Table 1. Table 2. AC Test Conditions Test Input Signal Output Enable Control tPLH, tPHL Data Pulses 0V tPZL 0V HIGH to LOW Switch tPZH VCCI HIGH to LOW Switch AC Load VCCo C1 R1 1.2V± 0.1V 15pF 1MΩ 1.5V± 0.1V 15pF 1MΩ 1.8V ± 0.15V 15pF 1MΩ 2.5V ± 0.2V 15pF 1MΩ 3.3V ± 0.3V 15pF 1MΩ DATA IN Vmi FXLA108 — Low-Voltage Dual-Supply 8-Bit Voltage Translator Test Diagrams VCCI GND tpxx tpxx DATA OUT Vmo VCCO Figure 4. Waveform for Inverting and Non-Inverting Functions Notes: 15. Input tR = tF = 2.0ns, 10% to 90%. 16. Input tR = tF = 2.5ns, 10% to 90%, at VI = 3.0V to 3.6V only. © 2009 Fairchild Semiconductor Corporation FXLA108 • Rev. 1.0.5 www.fairchildsemi.com 13 Notes: 17. Input tR = tF = 2.0ns, 10% to 90%. 18. Input tR = tF = 2.5ns, 10% to 90%, at VI = 3.0V to 3.6V only. Figure 6. 3-State Output High Enable Time for Low Voltage Logic FXLA108 — Low-Voltage Dual-Supply 8-Bit Voltage Translator Figure 5. 3-State Output Low Enable Time for Low Voltage Logic Notes: 19. Input tR = tF = 2.0ns, 10% to 90%. 20. Input tR = tF = 2.5ns, 10% to 90%, at VI = 3.0V to 3.6V only. Table 3. Test Measure Points Symbol VMI VDD (21) VCCI /2 VMO VCCo /2 VX 0.9 x VCCo VY 0.1 x VCCo Note: 21. VCCI=VCCA for control pin /OE or VMI=(VCCA/2). © 2009 Fairchild Semiconductor Corporation FXLA108 • Rev. 1.0.5 www.fairchildsemi.com 14 VOH 80% x VCCO VOUT 20% x VCCO VOL Time IOHD ≈ (CL + CI / O ) × ΔVOUT (20% − 80%) • VCCO = (CL + CI / O ) × Δt t RISE Figure 7. Active Output Rise Time and Dynamic Output Current High VOH tfall 80% x VCCO VOUT 20% x VCCO VOL Time IOLD ≈ (CL + CI / O ) × Figure 8. ΔVOUT (80% − 20%) • VCCO = (CL + CI / O ) × Δt t FALL FXLA108 — Low-Voltage Dual-Supply 8-Bit Voltage Translator trise Active Output Fall Time and Dynamic Output Current Low tW VCCI DATA IN VCCI/2 VCCI/2 GND Maximum Data Rate, f = 1/tW Figure 9. Maximum Data Rate VCCO DATA OUTPUT Vmo Vmo GND tskew tskew VCCO DATA OUTPUT Vmo Vmo GND Figure 10. Output Skew Time Note: 22. tSKEW = (tpHLmax – tpHLmin) or (tpLHmax – tpLHmin) © 2009 Fairchild Semiconductor Corporation FXLA108 • Rev. 1.0.5 www.fairchildsemi.com 15 FXLA108 — Low-Voltage Dual-Supply 8-Bit Voltage Translator Physical Dimensions Figure 11. 20-Terminal DQFN 2.5mm x 4.5mm Package Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. © 2009 Fairchild Semiconductor Corporation FXLA108 • Rev. 1.0.5 www.fairchildsemi.com 16 FXLA108 — Low-Voltage Dual-Supply 8-Bit Voltage Translator © 2009 Fairchild Semiconductor Corporation FXLA108 • Rev. 1.0.5 www.fairchildsemi.com 17