IRF PVI5033RPBF

Data Sheet No. PD10048 revL
Series PVI5033RPbF
Photovoltaic Isolator
Solid-State
Opto-Isolated MOSFET Gate Driver
Dual-Channel, 5V, 5µA
General Description
The PVI5033R Photovoltaic Isolator is a dualchannel, opto-isolated driver capable of directly
driving gates of power MOSFETs or IGBTs. It util­izes
a monolithic integrated circuit photovoltaic generator of
novel construction as its output. The output is controlled
by radiation from a GaAlAs light emit­ting diode (LED)
which is optically isolated from the photovol­t aic
generator.
Features






Monolithic construction
3,750 VRMS I/O isolation
1,200 VDC output-to-output isolation
Dual-Channel application flexibility
Solid-State Reliability
UL Recognized and BABT Certified
The PVI5033R is ideally suited for applications
requiring high-current and/or high voltage switching
with optical isolation between the low-level driving
circuitry and high-energy or high- voltage load
circuits. It can be used for directly driving gates of
power MOSFETs. The dual- channel configuration
allows its outputs to drive independent discrete power
MOSFETs, or be connected in parallel or in series to
provide higher-current drive for power MOSFETs or
higher-voltage drive for IGBTs. PVI5033R employs a
fast turn-off circuitry.
PVI5033R Photovoltaic Isolators are packaged in
an 8-pin, molded DIP package with either thru-hole or
“gull-wing” termi­nals. It is avail­able in standard plastic
ship­ping tubes or on tape-and-reel. Refer to Part
Identifica­tion in­formation.
Applications





Telecommunications
Load Distribution
Industrial Controls
Instrumentation and Measurement
Electronic Ballast
www.irf.com
Part Identification
PVI5033RPbF PVI5033RSPbF
PVI5033RS-TPbF
thru-hole
SMT
SMT, Tape and Reel
1
PVI5033RPbF
Electrical Specifications (-40°C ≤ TA ≤ +85°C unless otherwise specified)
INPUT CHARACTERISTICS
Limits
Min. Input Current (See Fig.1)
Input Current Range (See Fig. 1)
Max. Continuous Input Current @ TA=+25°C
LED Forward Voltage Drop @ 5mA, TA=+25°C (See Fig. 3)
Max. Reverse Voltage
Max. Reverse Current @ -6VDC, TA=+25°C
5.0
3.0 to 25
40 1.4
6.0
10 Units
OUTPUT CHARACTERISTICS
mA
mA
mA
V
V
µA
Limits
Unit
Min. Forward Voltage Max. Reverse Current 8.0
10
VDC
µADC
COUPLED CHARACTERISTICS
Min. Output Voltage @ ILED = 10mA, RL = 10MΩ
Limits
5
@ TA=0°C to +70°C (See Fig. 1 & 2)
Max. Output Voltage @ ILED = 10mA, RL = 10MΩ
10
@ TA=0°C to +70°C (See Fig. 1 & 2)
Max. Voltage Differential Between Outputs
1.0
@ ILED = 5mA, RL = 10MΩ
Min. Output Short-Circuit Current
1.65
@ ILED = 5mA, @ TA=+25°C (See Fig. 1 & 2)
Typical Output Short-Circuit Current
5
@ ILED = 10mA, @ TA=+25°C (See Fig. 1 & 2)
Max. Turn-On Time @ ILED = 5mA, CLOAD = 200pF (See Fig. 4)
2.5
Max. Turn-Off Time @ ILED = 5mA, CLOAD = 200pF (See Fig. 4)
.5
Off-State Clamping Resistance:minimum
350
maximum
1500
GENERAL CHARACTERISTICS
Min. Dielectric Strength, Input-Output
Min. Dielectric Strength, Output-to-Output
Min. Insulation Resistance, Input-to-Output
@TA=+25°C, 50%RH, 100VDC
Max. Capacitance, Input-Output
Max. Pin Soldering Temperature (10 seconds max.)
Ambient Temperature Range: Operating
Storage
Limits
3750
1200
1012
5.0
+260
40 to +85
40 to +125
Connection Diagram
International Rectifier does not recommend the use of this
product in aerospace, avionics, military or life support applications. Users of this International Rectifier product in
such applications assume all risks of such use and indemnify
International Rectifier against all damages resulting from
such use.
www.irf.com
Units
V
V
V
µA
µA
ms
ms
Ω
Ω
Units
VRMS
VDC
Ω
pF
°C
°C
°C
1
8 (+)
2
7 (-)
3
6 (+)
4
5 (-)
2
PVI5033RPbF
1.4
27
1.3
24
8
Output Voltage (VDC)
30
7
21
R L =10M Ω
6
18
5
15
4
12
3
9
2
0
6
S hort C ircuit C urrent
1
0
5
10
15
20
25
30
3
35
40
IL E D=5mA
1.2
Normalized Output
Open C irc u it Vo lta ge
9
Output Short-Circuit Current (µA)
10
1.1
1.0
Output Voltage
0.9
0.8
0.7
S h ort-C irc uit C urrent
0.6
0
0.5
-40
-20
0
Figure 1. Typical Output Characteristics
Response Time (µs)
deg. C limit
Max. devic
e and -40
TYPICAL
5 deg. C
limit
0
5000
0.5
1.0
1.5
3000
2000
1000
2.0
LED Forward Voltage Drop (Volts DC)
Figure 3. Input Characteristics (Current Controlled)
www.irf.com
Ton
4000
0
0
100
IL E D=5mA
6000
Min. devic
e and +8
Input Current (mA)
4
85
7000
16
8
60
Figure 2. Typical Variation of Output
CAUTION: provide current limiting
so that 25 mA maximum steadystate control current rating is
not exceeded
12
40
Ambient Temperature (deg. C)
Input Current (mA)
20
25
Toff
0
200
400
600
800
1000
Load Capacitance (pF)
Figure 4. Typical Response Time
3
PVI5033R
Case Outlines
01-2004 04
01-2005 04
4
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105
Data and specifications subject to change without notice. 2/2008
www.irf.com