IRF PVG613PBF

Data Sheet No. PD 10058 revH
Series PVG613PbF
Microelectronic Power IC
HEXFET® Power MOSFET Photovoltaic Relay
Single Pole, Normally Open, 0-60V, 1.0A AC/ 2.0 A DC
General Description
The PVG613 Series Photovoltaic Relay is a sin­glepole, normally open solid-state re­lay that can replace
electromechani­cal re­lays in many applications. It util­
izes International Rectifier’s proprietary HEXFET power
MOSFET as the output switch, driven by an inte­grated
circuit photovoltaic gen­erator of novel construction. The
output switch is con­trolled by radiation from a GaAlAs
light emit­ting diode (LED) which is optically isolated
from the photovol­taic generator.
These units exceed the performance capabilities of
electromechanical relays in operating life, sensitivity,
stable on-resistance, low off-state leakage, miniaturization, insensitivity to magnetic fields and ruggedess.
The compact PVG613 is particularly suited for isolated
switching of high currents from 12 to 48 Volt AC or DC
power sources.
Series PVG613 Relays are packaged in a 6-pin,
molded DIP package with either thru-hole or surface
mount (gull-wing) termi­nals. It is avail­able in standard
plastic ship­ping tubes or on tape-and-reel. Please refer
to Part Identifica­tion in­formation opposite.
Features
 Bounce-free operation
High load current capacity
Extremely low off-state leakage
Linear AC/DC operation
4,000 VRMS I/O Isolation
Solid-State reliability
 UL recognized
 ESD Tolerance:
4000V Human Body Model
500V Machine Model
Application
Industrial Control
Computers and Peripheral Devices
Audio Equipment
Power Supplies and Power Distribution
Factory Automation
Part Identification
PVG613PbF PVG613SPbF PVG613S-TPbF thru-hole
surface-mount
surface-mount, tape and reel
(HEXFET is the registered trademark for International Rectifier Power MOSFETs)
www.irf.com
1
Series PVG613PbF
Electrical Specifications (-40°C ≤ TA ≤ +85°C unless otherwise specified)
INPUT CHARACTERISTICS
Minimum Control Current (see figure 1)
Maximum Control Current for Off-State Resistance @ TA = +25°C Control Current Range (Caution: current limit input LED, see figure 6)
Maximum Reverse Voltage
Limits
Units
6.0
V
5.0
0.4
5.0 to 25
OUTPUT CHARACTERISTICS
Operating Voltage Range
Maximum Load Current @ TA = +40°C, 10mA Control (see figure 1)
A Connection B Connection
C Connection
Maximum Pulsed Load Current @ TA =+25°C (100 ms @ 10% Duty Cycle)
A Connection
Maximum On-State Resistance @TA =+25°C
For 1A pulsed load, 10mA Control (see figure 4)
A Connection
B Connection
C Connection
Maximum Off-State Leakage @TA =+25°C, ±48V (see figure 5)
Maximum Turn-On Time @TA =+25°C (see figure 7)
For 500mA, 50 VDC load, 10mA Control
Maximum Turn-Off Time @TA =+25°C (see figure 7)
For 500mA, 50 VDC load, 10mA Control
Maximum Output Capacitance @ 50VDC (see figure 2)
GENERAL CHARACTERISTICS
Minimum Dielectric Strength, Input-Output
Minimum Insulation Resistance, Input-Output, @TA =+25°C, 50%RH, 100VDC
Maximum Capacitance, Input-Output
Maximum Pin Soldering Temperature (10 seconds maximum)
Ambient Temperature Range:
Operating
Storage
Limits
mA
mA
mA
Units
0 to ±60
V(DC or AC peak)
1.0
1.5
2.0
A (AC or DC)
A (DC)
A (DC)
2.4A (AC or DC)
500
250
150
10
mΩ
mΩ
mΩ
nA
2.0
ms
0.5
130
ms
pF
Limits
Units
4000
1012
1.0
+260
-40 to +85
-40 to +100
VRMS
Ω
pF
°C
International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications.
Users of this International Rectifier product in such applications assume all risks of such use and indemnify International
Rectifier against all damages resulting from such use.
Connection Diagrams
www.irf.com
2
Series PVG613PbF
1.00
5 mA
0.75
0.50
0.25
0
0
20
600
'A' Connectio n
I
LED=10 mA
Typ ic al Ca pa c ita nc e (p F)
Max. Loa d Current (A)
1.25
40
60
80
450
300
150
0
0
100
15
30
45
Vd d, Dra in to Drain Voltage (V)
Amb ient Temp era ture (d eg. C)
'A' Connection
Figure 1. Current Derating Curves*
60
Figure 2. Typical Output Capacitance
* Derating of ‘B’ and ‘C’ connection at +85°C will be 70% of that specified at +40°C and is linear from +40°C to +85°C.
2.5
1.00
0.75
Loa d Current (A)
0.50
0.25
-0.5 -0.4 -0.3 -0.2 -0.1
0.1 0.2 0.3 0.4 0.5
-0.25
10 mA Control
-0.50
@25C, p ulsed
-0.75
Rd -on (Normalized to 25 d eg. C)
1.25
2.0
'A' Connec tion
10 mA Control
ID = 500 mA
1.5
1.0
0.5
-1.00
-1.25
Connec tion 'A' Volta ge Drop (Vdd )
Figure 3. Linearity Characteristics
www.irf.com
0
-50
-25
0
25
50
75
100
125
Ambient Temp era ture (d eg. C)
Figure 4. Typical Normalized On-Resistance
3
3.0
1.0
a nd +85 d eg
. C limit
10
12
8
M in. d ev ice
Inp ut Current (mA)
16
4
0.3
0.1
-35
-15
5
25
45
65
85
105
Ambient Temperature (deg. C)
Figure 5. Typical Normalized Off-State Leakage
0
TYPIC AL
30
CAUTION: provide current limiting
so that 25 mA maximum steadystate control current rating is
not exceeded
0
Ma x. d e vic
20
I
D-OFF/ I D-OFF 25 deg. C
100
e an d -40 de
g . C limit
Series PVG613PbF
0.5
1.0
2.0
1.5
LED Forwa rd Voltag e Drop (Volts DC)
Figure 6. Input Characteristics (Current Controlled)
LED Current (mA)
20
10
t d ly
t on
I
LED
90%
5
I 10%
D
t off
3
20
50
100
200
500
1000 2000
Delay Time (microsec ond s)
Figure 7. Typical Delay Times
www.irf.com
tdly
t on
t off
Figure 8. Delay Time Definitions
4
Series PVG613PbF
Case Outlines
01-2008 01
01-2009 01
www.irf.com
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105
Data and specifications subject to change without notice. 2/2008
5