VTSR, VSSR, VSOR www.vishay.com Vishay Dale Thin Film Molded, 25 mil or 50 mil Pitch, Dual-In-Line Thin Film Resistor, Surface Mount Network FEATURES Actual Size Vishay Dale Thin Film resistor networks are designed to be used in either analog or digital circuits. The use of thin film resistive elements within the network allows you to achieve an infinite number of very low noise and high stability circuits for industrial, medical and scientific instrumentation. Vishay Dale Thin Film resistor networks are packaged in molded plastic packages with sizes that are recognized throughout the world. The rugged packaging offers superior environmental protection and consistent dimensions for ease of placement with automatic SMT equipment. Vishay Dale Thin Film stocks many designs and values for off-the-shelf convenience. With Vishay Dale Thin Film you can depend on quality products delivered on time with service backing the product. • Reduces total assembly costs • Compatible with automatic surface mounting equipment • UL 94 V-0 flame resistant • Thin film tantalum nitride on silicon • Choice of package sizes: VTSR (TSSOP) JEDEC MC-153, VSSR (SSOP or QSOP) JEDEC MS-137, VSOR (SOIC narrow) JEDEC MS-012 • Moisture sensitivity level 1 (per IPC/JEDEC STD-20C) • Isolated/bussed/dual terminator/differential terminator circuits • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 TYPICAL PERFORMANCE ABSOLUTE TCR TOL. TRACKING 100 NA ABSOLUTE RATIO 5, 2, 1 NA SCHEMATICS 01 SCHEMATIC Resistance Range: 10 Ω to 47 kΩ Lead #1 03 SCHEMATIC Resistance Range: 10 Ω to 47 kΩ Lead #1 05 SCHEMATIC R1 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R2 R1 R2 R2 R1 R1 R2 R2 R2 R1 R1 R1 R2 R1 R2 Pin 1 47 SCHEMATIC VCC R1 R2 R3 Lead #1 Revision: 08-Jan-12 RESISTORS WITH ONE PIN COMMON The 01 circuit provides nominally equal resistors connected between a common pin and a discrete PC board pin. Commonly used in the following applications: • MOS/ROM • TTL input pull-down pull-up/-down • Digital pulse squaring • Open collector pull-up • TTL unused gate pull-up • “Wired OR” pull-up • High speed parallels pull-up • Power driven pull-up Broad selection of standard values available ISOLATED RESISTORS The 03 circuit provides nominally equal resistors isolated from all others and wired directly across. Commonly used in the following applications: • “Wired OR” pull-up • Long-line impedance balancing • Power driven pull-up • LED current limiting • Powergate pull-up • ECL output pull-down • Line termination • TTL input pull-down Broad selection of standard values available DUAL-LINE TERMINATOR; PULSE SQUARING The 05 circuit contains pairs of resistors connected between ground and a common line. The junctions of these resistor pairs are connected to the input leads. The 05 circuits are designed for dual-line termination and pulse squaring. Standard values are: VSSR1605: VSSR2005: R1 = 220 , R2 = 330 R1 = 220 , R2 = 330 R1 = 330 , R2 = 470 R1 = 220 , R2 = 1.8 k R1 = 1.5 k, R2 = 3.3 k DIFFERENTIAL TERMINATOR The 47 schematic consists of series resistor sections connected between VCC and ground. Each contains 3 resistors of 2 different resistance values. Standard values are: VSSR20 and VTSR20: VSSR16 and VTSR16: R1 = 270 , R2 = 120 R1 = 330 , R2 = 150 R1 = 330 , R2 = 220 GND Document Number: 60003 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VTSR, VSSR, VSOR www.vishay.com Vishay Dale Thin Film STANDARD ELECTRICAL SPECIFICATIONS TEST Material Pin/Lead Number Resistance Range TCR: Absolute TCR: Tracking SPECIFICATIONS Tantalum nitride 16, 20, 24 10 to 47 k ± 100 ppm/°C n/a ± 5 % standard (± 2 % available) ± 1 % standard (check factory) NA 100 mW max. 16 = 1.0 W, 20 = 1.2 W, 24 = 1.4 W 5 ppm/V (typical) 50 VDC - 55 °C to + 125 °C - 55 °C to + 150 °C < - 35 dB - Tolerance: Absolute Tolerance: Ratio Power Rating: Resistor Power Rating: Package Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Thermal EMF Shelf Life Stability: Absolute Shelf Life Stability: Ratio CONDITIONS Per E-24 table - 55 °C to + 125 °C Per E-24 table Per E-96 table At + 70 °C 0 °C to + 70 °C - DIMENSIONS AND IMPRINTING in inches (millimeters) B C Part Marking-Model, Pin Count (Optional), Schematic E Resistance Value Code xxxx F Date Code H G Pin #1 J A W D DIMENSION A - 16 PIN A - 20 PIN A - 24 PIN B (Ref.) C (Ref.) D E (Typ.) F G H J (Ref.) W VTSR-xxxx 0.206 ± 0.003 (5.23 ± 0.08) 0.256 ± 0.003 (6.50 ± 0.08) 0.306 ± 0.003 (7.77 ± 0.08) 0.0256 (0.65) 0.0087 (0.22) 0.004 (0.10) 0.024 (0.61) 0.173 ± 0.003 (4.39 ± 0.08) 0.015 × 45° (0.38) 0.252 ± 0.005 (6.40 ± 0.13) 0.005 (0.13) 0.043 ± 0.005 (1.09 ± 0.13) VSSR-xxxx 0.193 ± 0.004 (4.90 ± 0.010) 0.341 ± 0.003 (8.66 ± 0.08) 0.341 ± 0.003 (8.66 ± 0.08) 0.025 (0.64) 0.010 (0.25) 0.006 (0.15) 0.025 (0.64) 0.154 ± 0.003 (3.91 ± 0.08) 0.015 × 45° (0.38) 0.236 ± 0.008 (5.99 ± 0.20) 0.010 (0.25) 0.064 ± 0.005 (1.63 ± 0.13) VSOR-xxxx 0.390 ± 0.010 (9.91 ± 0.25) NA NA 0.050 (1.27) 0.016 (0.41) 0.008 (0.20) 0.030 (0.76) 0.152 ± 0.003 (3.86 ± 0.08) 0.015 × 45° (0.38) 0.236 ± 0.005 (5.99 ± 0.13) 0.008 (0.20) 0.064 ± 0.005 (1.63 ± 0.13) MARKING MODEL PIN COUNT (Optional) VXXX XX XX VSOR VSSR VTSR 16 20 24 01, 03, 05 or 47 Revision: 08-Jan-12 SCHEMATIC RESISTANCE RESISTANCE DATE CODE XXXX XXX XXXX 1 % RESISTANCE e.g.: 43R2 4 digits are used to express ohmic values only less than 100 . R is used to designate the decimal position 1 %, 2 %, 5 % RESISTANCE e.g.: 103 = 10K The first 2 digits are significant figures, the last digit specifies the number of zeros to follow. OR Document Number: 60003 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VTSR, VSSR, VSOR www.vishay.com Vishay Dale Thin Film MECHANICAL SPECIFICATIONS Resistive Element Tantalum nitride Substrate Material Silicon Body Molded epoxy Terminals Copper alloy Plating 100 % matte tin Lead Coplanarity 0.0005" Marking Resistance to Solvents Permanency testing per MIL-STD-202, method 215 PACKAGING INFORMATION LEADS TAPE AND REEL TUBES 16 2500 94 20 2500 74 24 2500 62 16 2500 98 20 2500 55 24 2500 55 16 2500 48 VTSR (TSSOP) VSSR (QSOP) VSOR (SOIC) 100 Precent of Rated Power MODEL DERATING CURVE 80 60 40 20 0 0 70 125 150 Ambient Temperature °C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VTSR1601103JTF V T S R 1 6 0 1 V S O R 1 6 0 5 GLOBAL MODEL PIN COUNT SCHEMATIC VTSR VSSR VSOR Lead (Pb)-free (e3) date code > 2705 20 (not VSOR) 24 (not VSOR) 01 (bussed) 03 (isolated) 16 (not VTSR) 20 (not VSOR) 05 (terminator) 47 (terminator) 1 3 3 0 1 RESISTANCE (3, 4 or 6 digits) 3 4 7 1 J T F G T F TOLERANCE PACKAGING XXX: 100R and all 1 %, 2 % and 5 % First 2 digits are significant figures. Last digit specifies number of zeros to follow. XXXX: < 100R 1 % First 3 digits are significant figures. Last digit specifies number of zeros to follow. F = 1.0 % G = 2.0 % J = 5.0 % TAPE AND REEL TF = Full reel 2500 UF = Tubed xxx xxx First 2 digits are significant figures. Last digit specifies number of zeros. G = 2.0 % J = 5.0 % Historical Part Number example: VSSR2001102GT/R (for reference purposes only) VSSR 20 01 102 G T/R MODEL PIN COUNT SCHEMATIC RESISTANCE TOLERANCE PACKAGING Revision: 08-Jan-12 Document Number: 60003 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000