PTN www.vishay.com Vishay Dale Thin Film Commercial Thin Film Chip Resistor, Surface Mount Chip FEATURES • • • • Actual Size 1505 These chip resistors are available in both “top side” and “wraparound” termination styles in a variety of sizes. They incorporate self passivated, enhanced Tantalum Nitride films, to give superior performance on moisture resistance, voltage coefficient, power handling and resistance stability. The terminations consist of an adhesion layer, a leach resistant nickel barrier, and solder coating. This product will out-perform all requirements of characteristic E of MIL-PRF-55342. CONSTRUCTION Passivation Tantalum Nitride Resistive Film • • • • • • • • Moisture resistant High purity alumina substrate Non-standard values available Will pass + 85 °C, 85 % relative humidity and 10 % rated power 100 % visual inspected per MIL-PRF-55342 Non-inductive Very low noise and voltage coefficient (< - 30 dB) Laser-trimmed tolerances to ± 0.1 % Wraparound resistance less than 10 m Epoxy bondable termination available Sulfur resistant (per ASTM B809-95 humid vapor test) Material categorization: For definitions please see www.vishay.com/doc?99912 Note * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. TYPICAL PERFORMANCE Solder Coating ABSOLUTE Nickel Barrier High Purity Alumina Substrate Adhesion Layer TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Resistance Range TCR: Absolute Tolerance: Absolute Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Shelf Life Stability: Absolute SPECIFICATIONS Tantalum nitride 10 to 3 M ± 25 ppm/°C to ± 100 ppm/°C ± 0.1 % to ± 5 % R ± 0.03 % 0.1 ppm/V 75 V to 200 V - 55 °C to + 125 °C - 55 °C to + 150 °C < - 30 dB - CONDITIONS - 55 °C to + 125 °C + 25 °C 2000 h at 70 °C - COMPONENT RATINGS CASE SIZE (1) POWER RATING (mW) 0402 50 0502 100 0505 150 0603 150 0705 200 0805 200 1005 250 1010 500 1206 400 1505 400 2208 750 2010 800 2512 1000 Note (1) 0705 and 0805 are the same (only use 0805 when ordering) Revision: 07-Mar-12 WORKING VOLTAGE (V) 75 75 75 75 100 100 100 150 200 150 150 200 200 RESISTANCE RANGE () 20 to 51.1K 20 to 65K 20 to 130K 10 to 130K 10 to 301K 10 to 301K 10 to 360K 50 to 600K 10 to 1M 10 to 1M 10 to 1.75M 10 to 2M 10 to 3M Document Number: 60026 76 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PTN www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches D W T E L CASE SIZE L W T D E 0402 0.042 ± 0.008 0.022 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.010 ± 0.005 0502 0.055 ± 0.006 0.025 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.015 ± 0.005 0505 0.055 ± 0.006 0.050 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.015 ± 0.005 0.064 ± 0.006 0.032 ± 0.005 0.020 max. 0.012 ± 0.005 0.015 ± 0.005 0.080 ± 0.006 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005 1005 0.105 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005 1010 0.105 ± 0.007 0.100 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005 1206 0.126 ± 0.008 0.063 ± 0.005 0.015 to 0.033 1505 0.155 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005 2010 0.209 ± 0.009 0.098 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005 2208 0.230 ± 0.007 0.075 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005 2512 0.259 ± 0.009 0.124 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005 0603 0705, 0805 (1) 0.020 + 0.005/ - 0.010 0.020 + 0.005/ - 0.010 Note (1) 0705 and 0805 are the same (only use 0805 when ordering) ENVIRONMENTAL TESTS (Vishay Performance vs. MIL-PRF-55342 Requirements) LIMITS MIL-PRF-55342 CHARACTERISTIC “E” TYPICAL VISHAY PERFORMANCE Resistance Temperature Characteristic ± 25 ppm/°C ± 15 ppm/°C Max. Ambient Temp. at Rated Wattage + 70 °C + 70 °C Max. Ambient Temp. at Power Derating + 150 °C + 150 °C ENVIRONMENTAL TEST Thermal Shock R ± 0.1 % ± 0.040 % Low Temperature Operation R ± 0.1 % ± 0.001 % Short Time Overload R ± 0.10 % ± 0.002 % High Temperature Exposure R ± 0.1 % ± 0.04 % Resistance to Soldering Heat R ± 0.2 % ± 0.008 % Moisture Resistance R ± 0.2 % ± 0.004 % Life + 70 °C at 1000 h R ± 0.50 % ± 0.02 % 10 000 minimum > 100 000 M Insulation Resistance Revision: 07-Mar-12 Document Number: 60026 77 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PTN www.vishay.com Vishay Dale Thin Film FILM LOAD LIFE STABILITY (at + 125 °C) DERATING CURVE 100 Percent of Rated Power 0.1 % 0.06 % 0.05 % 0.04 % 0.03 % 0.02 % Maximum Absolute Change 0.01 % 0.006 % 0.005 % 0.004 % 0.003 % 0.002 % 80 60 40 20 0 0.001 % 200 400 600 800 1000 1200 1400 1600 1800 2000 0 70 Time in h at + 125 °C 125 150 Ambient Temperature °C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PTN1206E1002BBT1 P T N 1 2 GLOBAL MODEL CASE SIZE TCR CHARACTERISTIC PTN 0402 0502 0505 0603 0805 1005 1010 1206 1505 2208 2010 2512 E = ± 25 ppm/°C H = ± 50 ppm/°C K = ± 100 ppm/°C 0 6 E 1 0 0 2 B RESISTANCE TOLERANCE TERMINATION The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. “R” designates the decimal point. B = ± 0.1 % D = ± 0.5 % F =±1% G=±2% J =±5% B = Wraparound Sn/Pb solder Sn63 w/nickel barrier G = Wraparound Au over Ni (gold) termination epoxy bondable RoHS compliant - e4 S = Wraparound electroplated 100 % pure matte tin RoHS-compliant - e3 Example: 10R0 = 10 1000 = 100 1001 = 1 k B T 1 PACKAGING BS = BULK 100 min., 1 mult WS = WAFFLE 100 min., 1 mult W0 = WAFFLE 100 min., 100 mult TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (1) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult Historical Part Number example: PTN0805H8801BBT (for reference purposes only) PTN 0805 H 8801 B B T STYLE CASE SIZE TCR CHARACTERISTIC OHMIC VALUE TOLERANCE TERMINATION PACKAGING Note (1) Preferred packaging code Revision: 07-Mar-12 Document Number: 60026 78 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000