MAPDCC0021 Low Cost Eight-Way GMIC SMT Power Divider 824 – 960 MHz Features • • • • • • • • • • • Rev. V2 Functional Block Diagram Small Size, Low Profile Superior Repeatability (Lot-to-Lot Variation) Typical Isolation: 30 dB Typical Insertion Loss: 1.5 dB Low Cost 1 Watt Power Handling Lead-Free QSOP-20 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of DS58-0001 Description M/A-COM’s MAPDCC0021 is an IC-based monolithic power divider in a low cost QSOP-20 plastic package. This 8-way power divider is ideally suited for applications where PCB real estate is at a premium and part count reduction and cost are critical. Typical applications include base station switching networks and other cellular equipment, including subscriber units. Available in tape and reel. The MAPDCC0021 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. 1. Pins 1, 3, 5, 7, 9, 12, 14, 16, 18, and 20 should be RF and DC grounded. Pin Configuration Pin No. Function Pin No. Function 1 GND 11 NC 2 RF 4 (OUT) 12 GND 3 GND 13 RF 8 (OUT) 4 RF 3 (OUT) 14 GND 5 GND 15 RF 7 (OUT) Ordering Information Part Number Package 6 RF 2 (OUT) 16 GND MAPDCC0021 Bulk Packaging 7 GND 17 RF 6 (OUT) MAPDCC0021-TR 1000 piece reel 8 RF 1 (OUT) 18 GND MAPDCC0021-TB Sample Test Board 9 GND 19 RF 5 (OUT) 10 RF IN 20 GND Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0021 Low Cost Eight-Way GMIC SMT Power Divider 824 – 960 MHz Rev. V2 Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Units Min Typ Max Insertion Loss Above 9.0 dB dB — 1.5 2.0 Isolation dB 20 30 — VSWR — — 1.7:1 2.0:1 dB — 0.4 0.8 Deg. — 5 10 Amplitude Balance Phase Balance Absolute Maximum Ratings 2,3 2. 3. 4. Handling Procedures Please observe the following precautions to avoid damage: Parameter Absolute Maximum Input Power4 1W CW Operating Temperature -40°C to +85°C Static Sensitivity Storage Temperature -65°C to +150°C GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. With internal load dissipation of 0.125 W maximum. Typical Performance Curves @ 25ºC Insertion Loss vs. Frequency VSWR vs. Frequency 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0021 Low Cost Eight-Way GMIC SMT Power Divider 824 – 960 MHz Rev. V2 Typical Performance Curves @ 25ºC Isolation vs. Frequency Lead-Free, QSOP-20† † Reference Application Note M538 for lead-free solder reflow recommendations. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.