MAPD-007352-000100 Low Cost Three-Way GMIC SMT Power Divider, 1761.5 - 2047.6 MHz Features • • • • • • • • • • • • Rev. V2 Functional Diagram Small Size and Low Profile Industry Standard SOIC-8 SMT Plastic Package Excellent Amplitude and Phase Balance Superior Repeatability Typical Insertion Loss: 1.0 dB Typical Isolation: 18 dB 1 Watt Power Handling Lead-Free SOIC-8 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS Compliant GND RF1 RF IN RF2 GND GND GND RF3 Pin Configuration Description M/A-COM’s MAPD-007352-000100 is an IC-based monolithic power divider using M/A-COM’s GMIC technology in a low cost SOIC-8 plastic package. This 3-way power divider is ideally suited for applications where small size, low insertion loss, superior phase/amplitude tracking and low cost are required. Typical applications include personal communication systems and other communication applications where size and PCB real estate are at a premium. Available in tape and reel. Pin No. Function Pin No. Function 1 GND 5 RF3 2 RF IN 6 GND 3 GND 7 RF2 4 GND 8 RF1 Ordering Information The MAPD-007352-000100 is fabricated using a passive-integrated circuit process. The process features full-chip passivation for increased performance and reliability. Part Number Package MAPD-007352-000100 Bulk Packaging MAPD-007352-0001TR 1000 piece reel MAPD-007352-0001TB Sample Test Board Note: Reference Application Note M513 for reel size information. Electrical Specifications: TA = 25°C1 Parameter Units Min Typ Max Insertion Loss above 4.8 dB dB — 1.0 1.4 Isolation dB 12 18 — VSWR Input Ratio — 1.8:1 2.0:1 Amplitude Balance dB — 0.3 0.6 1. All specifications apply with a 50-ohm source and load impedance. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPD-007352-000100 Low Cost Three-Way GMIC SMT Power Divider, 1761.5 - 2047.6 MHz Absolute Maximum Ratings 2,3 2. Recommended PIN Configuration Absolute Maximum Parameter Input Power Rev. V2 4 1W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. With internal load dissipation of 0.125W maximum. 3. 4. Handling Procedures Typical Performance Curves Please observe the following precautions to avoid damage: Insertion Loss Static Sensitivity Insertion Loss vs. Frequency 2.00 Insertion Loss (dB) GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 1.50 1.00 0.50 0.00 1750 1800 1850 1900 1950 2000 2050 2000 2050 Frequency (MHz) RF1 VSWR RF2 RF3 Isolation VSWR vs. Frequency Isolation vs. Frequency 2.00 35 1.90 30 Isolation (dB) 1.80 VSWR 1.70 1.60 1.50 1.40 1.30 1.20 25 20 15 10 5 1.10 1.00 1750 1800 1850 1900 1950 2000 RF1 RF2 0 1750 1800 1850 1900 1950 Frequency (MHZ) Frequency (MHz) RFIN 2050 RF3 RF1-RF2 RF1-RF3 RF2-RF3 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPD-007352-000100 Low Cost Three-Way GMIC SMT Power Divider, 1761.5 - 2047.6 MHz Rev. V2 Typical Performance Curves Phase Balance (Relative to RF1) Phase Balance vs. Frequency Phase Balance (deg) 10 8 6 4 2 0 1750 1800 1850 1900 1950 2000 2050 Frequency (MHz) RF2 Phase (Ref RF1) RF3 Phase (Ref RF1) Lead-Free SOIC-8† † Reference Application Note M538 for lead-free solder reflow recommendations. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.