MGA-31389 0.1W High Gain Driver Amplifier 50MHz ~ 2GHz Data Sheet Description Features Avago Technologies MGA-31389 is a high performance Driver Amplifier MMIC, housed in a standard SOT-89 plastic package. The device features flat high gain with excellent input and output return loss, as well as superior linearity performance. The device can be easily matched to obtain desired performance. • ROHS compliant MGA-31389 is especially ideal for 50 Ω wireless infrastructure application within the 50 MHz to 2GHz frequency range applications. With high IP3 and low noise figure and wideband operation, the MGA-31389 may be utilized as a driver amplifier in the transmit chain and as a second stage LNA in the receiver chain. • Advanced enhancement mode PHEMT Technology This device uses Avago Technologies proprietary 0.25 mm GaAs Enhancement mode PHEMT process. At 0.9 GHz, Vd = 5 V, Id = 73 mA (typ) @ 25° C Pin connections and Package Marking • Noise Figure = 2.0 dB • Halogen free • High IP3 at low DC bias power(1) • High gain, with good gain flatness • Low noise figure • Excellent uniformity in product specification • SOT-89 standard package Specifications • OIP3 = 38.6 dBm • Gain = 21.3 dB, Gain flatness (± 50 MHz) = 0.14 dB • P1dB = 22.2 dBm • IRL = 30.5 dB, ORL = 14.7 dB 13X #1 #2 RFin GND Top View Note: 1. The MGA-31389 has a superior LFOM of 13.3 dB. Linearity Figure of Merit (LFOM) is essentially OIP3 divided by DC bias power. #3 RFout #3 #2 RFout GND #1 RFin Simplified Schematic Vdd Bottom View Note: Package marking provides orientation and identification “13”=Device Code “X” =Date Code character indentifies month of manufacturing Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model = 75 V ESD Human Body Model = 1000 V Refer to Avago Application Note A004R: Electrostatic Discharge, Damage and Control. C C C L RFin C Figure 1. Simplified Schematic diagram RFout C MGA-31389 Absolute Maximum Rating (1) TA=25° C Thermal Resistance Symbol Parameter Units Absolute Max. Vd, max Drain Voltage, RF output to ground V 5.5 Pd Power Dissipation (2) mW 605 Pin CW RF Input Power dBm 20 Tj Junction Temperature °C 150 TSTG Storage Temperature °C -65 to 150 Thermal Resistance (3) (Vd = 5.0 V, Tc = 85° C), θjc = 60.0° C/W Notes: 1. Operation of this device in excess of any of these limits may cause permanent damage. 2. Source lead temperature is 25° C. Derate 16.7 mW/° C for TL>128.0° C. 3. Thermal resistance measured using 150° C Infra-Red Microscopy Technique. MGA-31389 Electrical Specification (1) TC = 25° C, Vd = 5 V, unless noted Symbol Parameter and Test Condition Frequency Units Min. Typ. Max. Ids Quiescent Current N/A mA 62 73 90 NF Noise Figure 0.45 GHz 0.9 GHz 1.5 GHz dB – 2.3 2.0 2.0 2.5 Gain Gain 0.45 GHz 0.9 GHz 1.5 GHz dB 20 21.5 21.3 20.6 23 OIP3 (2) Output Third Order Intercept Point 0.45 GHz (2) 0.9 GHz (2) 1.5 GHz (2) dBm 36.3 38.6 38.6 41.3 – P1dB Output Power at 1 dB Gain Compression 0.45 GHz 0.9 GHz 1.5 GHz dBm 20.6 22.0 22.2 21.7 – PAE Power Added Efficiency at P1dB 0.45 GHz 0.9 GHz 1.5 GHz % – 41.0 41.2 38.4 – IRL Input Return Loss 0.45 GHz 0.9 GHz 1.5 GHz dB – 24.3 30.5 15.3 – ORL Output Return Loss 0.45 GHz 0.9 GHz 1.5 GHz dB – 11.4 14.7 12.1 – ISOL Isolation 0.45 GHz 0.9 GHz 1.5 GHz dB – 27.2 27.6 28.6 – Note : 1. Measurements obtained from a test circuit described in Figure 34 2. OIP3 test condition: F1 - F2 = 10 MHz, with input power of -14 dBm per tone measured at worst case side band. 2 MGA-31389 Consistency Distribution Chart (1,2) 70 80 1.7 Figure 2. Id @ 900MHz, Vd=5V, LSL=62mA, Nominal=76mA, USL=90mA 20.8 21 21.1 21.3 21.5 21.7 21.9 22 22.1 Figure 4. Gain @ 900MHz, Vd=5V, LSL=20dB, Nominal=21.5dB, USL=23dB 1.8 1.8 2 2.1 2.2 2.3 Figure 3. NF @ 900MHz, Vd=5V, Nominal=2.0dB, USL=2.5dB 38 39 40 41 Figure 5. OIP3 @ 900MHz, Vd=5V, LSL=36.3dBm, Nominal=39.3dBm 21 22 23 Figure 6. P1dB @ 900MHz, Vd=5V, LSL= 20.6dBm, Nominal=22.2dBm Notes: 1. Data sample size is 3000 samples taken from 3 different wafers and 2 different lots. Future wafers allocated to this product may have nominal values anywhere between the upper and lower limits. 2. Measurements are made on production test board which represents a trade-off between optimal Gain, NF, OIP3 and OP1dB. Circuit losses have been de-embedded from actual measurements. 3 MGA-31389 Application Circuit Data for 450 MHz 44 43 42 41 40 39 38 37 36 35 34 33 23 22 P1dB (dBm) OIP3 (dBm) Tc = 25° C, Vd = 5.0 V, Id = 73 mA 25° C -40° C 85° C 150 250 350 450 550 Frequency (MHz) 650 22 -5 21 -10 18 350 450 550 Frequency (MHz) 650 250 350 450 550 Frequency (MHz) 750 25° C -40° C 85° C 650 -20 -25 -30 25° C -40° C 85° C 17 -35 -40 150 750 Figure 9. Gain vs Frequency and Temperature 250 350 450 550 Frequency (MHz) 650 750 Figure 10. IRL vs Frequency and Temperature -26 0 25° C -40° C 85° C -27 Isolation (dB) -5 -10 -15 -20 -25 150 250 -15 19 16 150 25° C -40° C 85° C Figure 8. P1dB vs Frequency and Temperature IRL (dB) Gain (dB) 19 17 150 750 20 ORL (dB) 20 18 Figure 7. OIP3 vs Frequency and Temperature -28 -29 25° C -40° C 85° C -30 250 350 450 550 Frequency (MHz) Figure 11. ORL vs Frequency and Temperature 4 21 650 750 -31 150 250 350 450 550 Frequency (MHz) Figure 12. Isolation vs Frequency and Temperature 650 750 MGA-31389 Application Circuit Data for 450 MHz (cont'd) Tc = 25° C, Vd = 5.0 V, Id = 73 mA 3.0 2.0 OIP3 (dBm) Noise Figure (dB) 2.5 1.5 1.0 25° C -40° C 85° C 0.5 0.0 150 250 350 450 550 Frequency (MHz) 650 750 Figure 13. Noise Figure vs Frequency and Temperature 25° C -40° C 85° C 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Voltage (Volt) Figure 15. Current vs Voltage and Temperature 5 25° C -40° C 85° C -20 -19 -18 -17 -16 -15 -14 -13 -12 -11 -10 -9 -8 -7 -6 -5 Pin (dBm) Figure 14. OIP3 vs Input Power and Temperature Current (mA) 110 100 90 80 70 60 50 40 30 20 10 0 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 MGA-31389 Application Circuit Data for 900 MHz 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 600 23.0 25° C -40° C 85° C 22.5 P1dB (dBm) OIP3 (dBm) Tc = 25° C, Vd = 5.0 V, Id = 73 mA 700 800 900 1000 Frequency (MHz) 1100 21.0 20.0 1200 22.0 -10 21.5 -15 IRL (dB) 20.5 20.0 25° C -40° C 85° C 19.5 19.0 600 25° C -40° C 85° C 700 800 900 1000 Frequency (MHz) 600 700 800 900 1000 Frequency (MHz) 1100 1100 1200 -25 -35 600 1200 25° C -40° C 85° C 700 800 900 1000 Frequency (MHz) Figure 19. IRL vs Frequency and Temperature 0 -27.0 25° C -40° C 85° C -5 -27.5 Isolation (dB) -10 -15 -20 -25 -28.0 -28.5 25° C -40° C 85° C -30 600 700 800 900 1000 Frequency (MHz) Figure 20. ORL vs Frequency and Temperature 6 1200 -20 -30 Figure 18. Gain vs Frequency and Temperature -35 1100 Figure 17. P1dB vs Frequency and Temperature 21.0 Gain (dB) 21.5 20.5 Figure 16. OIP3 vs Frequency and Temperature ORL (dB) 22.0 1100 1200 -29.0 600 700 800 900 1000 Frequency (MHz) Figure 21. Isolation vs Frequency and Temperature 1100 1200 MGA-31389 Application Circuit Data for 900 MHz (cont'd) Tc = 25° C, Vd = 5.0 V, Id = 73 mA 3.0 2.0 OIP3 (dBm) Noise Figure (dB) 2.5 1.5 1.0 25° C -40° C 85° C 0.5 0.0 600 700 800 900 1000 Frequency (MHz) 1100 1200 Figure 22. Noise Figure vs Frequency and Temperature 25° C -40° C 85° C 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Voltage (Volt) Figure 24. Current vs Voltage and Temperature 7 25° C -40° C 85° C -20 -19 -18 -17 -16 -15 -14 -13 -12 -11 -10 -9 -8 -7 -6 -5 Pin (dBm) Figure 23. OIP3 vs Input Power and Temperature Current (mA) 110 100 90 80 70 60 50 40 30 20 10 0 43 42 41 40 39 38 37 36 35 34 33 32 31 30 MGA-31389 Application Circuit Data for 1500MHz Tc = 25° C, Vd = 5.0 V, Id = 73 mA 44 23.0 25° C -40° C 85° C 43 22.5 41 P1dB (dBm) OIP3 (dBm) 42 40 39 22.0 21.5 21.0 38 36 1200 1300 1400 1500 1600 Frequency (MHz) 1700 20.0 1200 1800 Figure 25. OIP3 vs Frequency and Temperature IRL (dB) Gain (dB) 20.5 20.0 19.5 25° C -40° C 85° C 1300 1400 1500 1600 Frequency (MHz) 1700 1800 Figure 27. Gain vs Frequency and Temperature 1800 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 1200 25° C -40° C 85° C 1300 1400 1500 1600 Frequency (MHz) 1700 1800 -28.0 Isolation (dB) ORL (dB) 1700 -27.5 25° C -40° C 85° C -5 -10 -28.5 -29.0 -15 1300 1400 1500 1600 Frequency (MHz) Figure 29. ORL vs Frequency and Temperature 8 1400 1500 1600 Frequency (MHz) Figure 28. IRL vs Frequency and Temperature 0 -20 1200 1300 Figure 26. P1dB vs Frequency and Temperature 21.0 19.0 1200 25° C -40° C 85° C 20.5 37 1700 1800 -29.5 1200 25° C -40° C 85° C 1300 1400 1500 1600 Frequency (MHz) Figure 30. Isolation vs Frequency and Temperature 1700 1800 MGA-31389 Application Circuit Data for 1500 MHz (cont'd) Tc = 25° C, Vd = 5.0 V, Id = 73 mA 3.0 2.0 OIP3 (dBm) Noise Figure (dB) 2.5 1.5 1.0 25° C -40° C 85° C 0.5 0.0 1200 1300 1400 1500 1600 Frequency (MHz) 1700 1800 Figure 31. Noise Figure vs Frequency and Temperature 25° C -40° C 85° C 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Voltage (Volt) Figure 33. Current vs Voltage and Temperature 9 25° C -40° C 85° C -20 -19 -18 -17 -16 -15 -14 -13 -12 -11 -10 -9 -8 -7 -6 -5 Pin (dBm) Figure 32. OIP3 vs Input Power and Temperature Current (mA) 110 100 90 80 70 60 50 40 30 20 10 0 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 C12 C2 C7 RFout SOT-89 REV 3.2 Jul 2009 0805 2.2UF/15V VDD RFin L4 C4 C5 VSENSE L1 L2 C9 GND 13X L3 AVAGO TECHNOLOGIES OUT C6 GND C1 C2 C1 L1 C8 CTxx C7 C3 0805 2.2UF/15V C11 C10 IN GND VDD VSENSE GND 2.2UF/15V C3 0805 GND Vdd VCTRL Application Circuit Description and Layout C8 Figure 34. Circuit diagram Figure 35. Demoboard Bill of Materials Description For 0.45 GHz (1) For 0.9 GHz (2) For 1.5 GHz (3) Circuit Symbol Size Value Manufacturer Value Manufacturer Value Manufacturer C1 0402 10 pF Murata 3.0 pF Murata 3.9 pF Murata C2 0402 0.1 mF Murata 0.1 mF Murata 0.1 mF Murata C3 0603 2.2 mF Murata 2.2 mF Murata 2.2 mF Murata C7 0402 100 pF Murata 100 pF Murata 100 pF Murata C8 0402 15 pF Murata 5.6 pF Murata 3 pF Murata L1 0402 39 nH Murata 12 nH Murata 3.9 nH Murata DCin RFin Input Matching Circuit 1. Γ_mag = 0.055, G_ang = -94.4° 2. Γ_mag = 0.070, G_ang = -98.9° 3. Γ_mag = 0.095, G_ang = -117.1° 13X Output Matching Circuit 1. Γ_mag = 0.066, G_ang = -21.4° 2. Γ_mag = 0.152, G_ang = 15.1° 3. Γ_mag = 0.275, G_ang = 60.1° RFout Figure 36. Input and output tuned Gamma location for 450MHz (1), 900MHz (2) and 1500MHz (3) For best performance, MGA-31389 is an input and output prematched driver amplifier. To bias MGA-31389, a +5V supply (Vdd) is connected to the output pin through a RF choke, L1 (which isolates the inband signal from the DC supply). The bypass capacitor helps to eliminate out of low band frequency signals from the power supply, C3, C2 and C1. Blocking capacitors are required for its input (C7) and output (C8), to isolate the supply voltage from preceeding and succeeding circuits. C7 also plays a part in input tuning to improve input return loss while L1 and C8 help in tuning output. The recommended output tuning is for achieving best OIP3, while meeting typical specifications for other parameters. 10 MGA-31389 Typical Scatter Parameters (1) Tc = 25° C, Vd = 5.0 V, Id = 73 mA, Zo = 50 Ω Freq GHz S11 Mag. S11 dB S11 Ang. S21 Mag. S21 dB S21 Ang. S12 Mag. S12 dB S12 Ang. S22 Mag. S22 dB S22 Ang. K Factor 0.10 0.046 -26.7 -127.5 12.372 21.8 169.8 0.046 -26.8 -3.3 0.281 -11.0 172.9 1.100 0.20 0.034 -29.4 -146.1 12.409 21.9 162.4 0.046 -26.7 -9.9 0.270 -11.4 160.6 1.104 0.30 0.032 -29.9 -150.7 12.415 21.9 154.2 0.046 -26.7 -15.9 0.258 -11.8 149.5 1.108 0.40 0.035 -29.0 -146.0 12.406 21.9 145.8 0.046 -26.8 -21.9 0.240 -12.4 138.9 1.117 0.50 0.040 -27.9 -138.6 12.386 21.9 137.2 0.046 -26.8 -27.8 0.216 -13.3 128.8 1.130 0.60 0.047 -26.5 -135.8 12.350 21.8 128.6 0.045 -26.9 -33.7 0.189 -14.5 118.3 1.143 0.70 0.053 -25.5 -137.3 12.308 21.8 119.8 0.045 -27.0 -39.6 0.161 -15.9 107.3 1.158 0.80 0.057 -24.8 -141.8 12.247 21.8 111.1 0.044 -27.0 -45.6 0.133 -17.5 95.1 1.174 0.90 0.059 -24.5 -149.0 12.179 21.7 102.2 0.044 -27.2 -51.5 0.106 -19.5 81.1 1.192 1.00 0.058 -24.8 -158.8 12.092 21.7 93.4 0.043 -27.3 -57.6 0.081 -21.8 63.4 1.211 1.10 0.051 -25.8 -168.3 12.003 21.6 84.5 0.043 -27.4 -63.3 0.067 -23.5 39.1 1.230 1.20 0.042 -27.6 170.5 11.913 21.5 75.4 0.042 -27.5 -69.2 0.054 -25.3 10.9 1.248 1.30 0.035 -29.1 131.7 11.805 21.4 66.2 0.041 -27.7 -75.2 0.049 -26.3 -21.3 1.266 1.40 0.042 -27.5 83.8 11.686 21.4 56.9 0.041 -27.8 -81.2 0.052 -25.7 -53.4 1.282 1.50 0.067 -23.5 50.5 11.545 21.2 47.4 0.040 -27.9 -87.4 0.060 -24.4 -78.5 1.298 1.60 0.102 -19.9 28.8 11.382 21.1 37.7 0.040 -28.0 -93.6 0.070 -23.1 -98.5 1.311 1.70 0.143 -16.9 12.1 11.165 21.0 27.8 0.039 -28.2 -100.3 0.080 -22.0 -114.8 1.324 1.80 0.189 -14.5 -2.8 10.908 20.8 17.9 0.039 -28.3 -107.1 0.089 -21.0 -128.9 1.335 1.90 0.240 -12.4 -16.6 10.600 20.5 7.7 0.038 -28.4 -114.4 0.096 -20.3 -141.7 1.348 2.00 0.292 -10.7 -30.0 10.230 20.2 -2.5 0.037 -28.6 -121.8 0.102 -19.8 -153.3 1.364 2.10 0.346 -9.2 -43.5 9.831 19.9 -12.8 0.036 -28.8 -129.5 0.107 -19.4 -164.5 1.384 2.20 0.398 -8.0 -56.6 9.365 19.4 -23.1 0.035 -29.1 -137.6 0.108 -19.3 -175.7 1.411 2.30 0.450 -6.9 -69.7 8.862 19.0 -33.4 0.034 -29.4 -145.7 0.107 -19.4 174.4 1.447 2.40 0.501 -6.0 -82.4 8.323 18.4 -43.6 0.033 -29.7 -154.1 0.104 -19.7 165.1 1.489 2.50 0.549 -5.2 -94.7 7.764 17.8 -53.5 0.031 -30.1 -162.4 0.098 -20.1 156.7 1.546 3.00 0.744 -2.6 -148.3 5.017 14.0 -99.1 0.023 -32.8 157.6 0.040 -27.9 148.5 1.973 3.50 0.853 -1.4 174.9 3.042 9.7 -135.2 0.017 -35.6 124.7 0.089 -21.0 -133.1 2.645 4.00 0.900 -0.9 150.2 1.908 5.6 -163.5 0.014 -37.2 98.7 0.195 -14.2 -142.0 3.446 5.00 0.908 -0.8 105.9 0.945 -0.5 147.1 0.014 -37.2 55.9 0.328 -9.7 -167.2 6.072 6.00 0.903 -0.9 41.9 0.502 -6.0 91.2 0.016 -36.0 9.0 0.340 -9.4 156.6 10.230 7.00 0.943 -0.5 -1.6 0.240 -12.4 42.9 0.015 -36.5 -28.8 0.431 -7.3 112.4 12.763 8.00 0.958 -0.4 -16.7 0.131 -17.7 5.7 0.014 -37.1 -55.2 0.509 -5.9 71.7 16.973 9.00 0.938 -0.6 -38.6 0.082 -21.8 -33.5 0.013 -37.9 -83.4 0.546 -5.3 29.8 40.810 10.00 0.941 -0.5 -75.0 0.045 -26.9 -76.8 0.009 -41.2 -117.9 0.610 -4.3 -16.1 92.313 11.00 0.961 -0.3 -101.8 0.020 -33.8 -108.6 0.003 -49.3 -143.7 0.740 -2.6 -49.3 245.787 12.00 0.974 -0.2 -116.2 0.009 -41.4 -122.2 0.000 -68.3 -14.2 0.824 -1.7 -66.2 2552.738 13.00 0.969 -0.3 -127.3 0.004 -49.0 -108.5 0.003 -49.4 -6.7 0.839 -1.5 -85.5 746.065 14.00 0.951 -0.4 -145.5 0.004 -48.2 -63.1 0.006 -43.8 -28.7 0.836 -1.6 -115.5 573.063 15.00 0.956 -0.4 -168.7 0.006 -44.3 -70.1 0.008 -41.9 -57.1 0.871 -1.2 -144.7 211.605 16.00 0.966 -0.3 178.6 0.006 -45.1 -101.7 0.007 -43.5 -89.3 0.910 -0.8 -158.6 153.352 17.00 0.966 -0.3 171.8 0.002 -53.8 -69.5 0.003 -49.9 -64.3 0.924 -0.7 -162.9 749.036 18.00 0.949 -0.5 158.3 0.004 -49.1 -14.3 0.004 -47.2 -27.6 0.906 -0.9 -170.2 587.481 19.00 0.946 -0.5 139.4 0.007 -42.5 -13.5 0.008 -42.1 -21.2 0.852 -1.4 171.1 244.925 20.00 0.947 -0.5 125.2 0.012 -38.7 -17.0 0.012 -38.7 -21.6 0.822 -1.7 145.1 122.769 11 MGA-31389 K-Factor (1) Tc = 25° C, Vd = 5.0 V, Id = 73 mA, Zo = 50 Ω K Factor K Factor 10 9 8 7 6 5 4 3 2 1 0 0 2 4 6 8 10 12 Frequency (GHz) 14 16 18 20 MGA-31389 Typical Noise Parameters (1) Tc = 25° C, Vd = 5.0 V, Id = 73 mA, Zo = 50 Ω Freq (GHz) Fmin (dB) Γopt Mag Γopt Ang Rn/Z0 Ga (dB) 0.5 2.08 0.204 4.8 0.34 22.11 0.8 1.85 0.247 20.6 0.33 21.73 0.9 1.71 0.312 6.2 0.36 21.44 1 1.75 0.309 18.7 0.36 21.38 1.5 1.90 0.264 20.6 0.31 21.06 2 2.24 0.254 90.3 0.28 20.27 2.5 2.35 0.470 118.8 0.28 18.99 3 2.88 0.601 157.6 0.13 16.91 3.5 3.53 0.714 -173.1 0.08 14.77 4 5.03 0.769 -148.1 0.49 12.19 4.5 7.91 0.855 -124.3 3.88 10.11 5 7.65 0.883 -103.0 7.78 7.38 5.5 8.82 0.868 -80.5 18.35 4.51 6 10.27 0.929 -56.6 41.09 2.21 Note: 1. Measurements are made using 10 mils Rogers RO4350 TRL Board. 12 Part Number Ordering Information Part Number No. of Devices Container MGA-31389-BLKG 100 Antistatic Bag MGA-31389-TR1G 3000 13" Tape/Reel SOT89 Package Dimensions D D D1 D1 POLISH E1 OR E1 E L L e e S S e1 C e1 1.625 D2 MATTE FINISH HALF ETCHING DEPTH 0.100 1.23 2.35 0.77 0.2 D1 E b b1 b POLISH 1.24 E A OR b1 Dimensions in mm 13 Dimensions in inches Symbols Minimum Nominal Maximum Minimum Nominal Maximum A 1.40 1.50 1.60 0.055 0.059 0.063 0.047 L 0.89 1.04 1.20 0.0350 0.041 b 0.36 0.42 0.48 0.014 0.016 0.018 b1 0.41 0.47 0.53 0.016 0.018 0.030 C 0.38 0.40 0.43 0.014 0.015 0.017 D 4.40 4.50 4.60 0.173 0.177 0.181 D1 1.40 1.60 1.75 0.055 0.062 0.069 D2 1.45 1.65 1.80 0.055 0.062 0.069 E 3.94 - 4.25 0.155 - 0.167 E1 2.40 2.50 2.60 0.094 0.098 0.102 e1 2.90 3.00 3.10 0.114 0.118 0.122 S 0.65 0.75 0.85 0.026 0.030 0.034 e 1.40 1.50 1.60 0.054 0.059 0.063 Device Orientation USER FEED DIRECTION 13X 13X 13X CARRIER TAPE 13X REEL COVER TAPE Tape Dimensions Ø 1.5 +0.1/-0.0 8.00 0.30 ± .05 Ø 1.50 MIN. 2.00 ± .05 SEE NOTE 3 4.00 SEE NOTE 1 A R 0.3 MAX. 1.75 ± .10 5.50 ± .05 SEE NOTE 3 Bo 12.0 ± .3 Ko SECTION A - A 14 Ao Ao = 4.60 Bo = 4.90 Ko = 1.90 R 0.3 TYP. A DIMENSIONS IN MM NOTES: 1. 10 SPROCKET HOLE PITCH CUMULATIVE TOLERANCE ±0.2 2. CAMBER IN COMPLIANCE WITH EIA 481 3. POCKET POSITION RELATIVE TO SPROCKET HOLE MEASURED AS TRUE POSITION OF POCKET, NOT POCKET HOLE Reel Dimensions – 13” Reel R LOKREEL R MINNEAPOLIS USA U.S PAT 4726534 102.0 REF 1.5 ATTENTION Electrostatic Sensitive Devices Safe Handling Required 88 REF 330.0 REF "A" 96.5 6 PS Detail "B" 6 PS Detail "A" 8.4 - 0.2 (MEASURED AT HUB) 11.1 MAX. Ø 20.2 Dimensions in mm M IN +0.5 Ø 13.0 -0.2 2.0 ± 0.5 For product information and a complete list of distributors, please go to our web site: +0.3 (MEASURED AT HUB) www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2013 Avago Technologies. All rights reserved. AV02-2586EN - May 23, 2013