MGA-31716 0.1 W High Linearity Driver Amplifier Data Sheet Description Features Avago Technologies MGA-31716 is a high linearity driver MMIC Amplifier housed in a standard QFN 3X3 16 lead plastic package. It features high gain, low operating current, low noise figure with good input and output return loss. Power consumption can be further reduced by reducing the quiescent bias current using two external bias resistors. The device can be easily matched at different frequencies to obtain optimal linearity performance at those frequencies. x Very high linearity at low DC bias power [1] MGA-31716 is especially ideal for 50 : wireless infrastructure application operating from DC to 2 GHz frequency range. With the high linearity, excellent gain flatness and low noise figure the MGA-31716 may be utilized as a driver amplifier in the transmit chain and as a second stage LNA in the receiver chain. x Lead-free MSL1 This device uses Avago Technologies proprietary 0.25 Pm GaAs Enhancement mode PHEMT process. Pin connections and Package Marking x High Gain with good gain flatness x ROHS compliant x Good Noise Figure x Halogen free x Advanced enhancement-mode PHEMT Technology x QFN 3X3 16-Lead standard package Specifications At 900 MHz, Vd = 5 V, Id = 58 mA (typ) @ 25° C x OIP3 = 41.0 dBm x Noise Figure = 1.9 dB x Gain = 20.2 dB x P1dB = 21.2 dBm x IRL = 16.7dB, ORL = 15.9 dB Note: 1. The MGA-31716 has a superior LFOM of 16.5 dB. Linearity-Figure-ofMerit (LFOM) is the ratio of OIP3 to total DC bias power. 31716 YYWW XXXX Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model = 60 V ESD Human Body Model = 300 V Refer to Avago Application Note A004R: Electrostatic Discharge, Damage and Control. TOP VIEW Vbias 16 NC 14 Vctrl 15 Vd 13 NC 12 1 NC RFout 11 2 NC Gnd RFout 10 3 RFin NC 9 4 NC 5 NC 6 NC 7 NC 8 NC NC - not connected BOTTOM VIEW Notes: Package marking provides orientation and identification “31716” = Device Part Number “YYWW” = Work Week and Year of manufacturing “XXXX” = Last 4 digit of Lot Number Figure 1. Simplified Application Circuit Table 1. MGA-31716 Absolute Maximum Rating [1] TA = 25° C Thermal Resistance Symbol Parameter Units Absolute Maximum Vd, max Drain Voltage V 5.5 Vbias, max Bias Voltage V 5.5 Vctrl, max Control Voltage V 5.5 Pd Power Dissipation [2] mW 605 Pin CW RF Input Power dBm 24 Tj Junction Temperature °C 150 Tstg Storage Temperature °C -65 to 150 Tamb Ambient Temperature °C -40 to 85 Thermal Resistance [3] (Vd = 5.0 V, Tc = 85° C) Tjc = 67.0°C/W Notes: 1. Operation of this device in excess of any of these limits may cause permanent damage 2. Source lead temperature is 25° C. Derate 14.9 mW/°C for TL > 130.0° C. 3. Thermal resistance measured using 150° C Infra-Red Microscopy Technique. Table 2. MGA-31716 Electrical Specification [1] TC = 25° C, Vd = 5.0 V, unless otherwise noted Symbol Parameter and Test Condition Frequency Units Min. Typ. Max. Ids Quiescent Current 450 MHz 900 MHz 1500 MHz mA 37 63 58 54 83 NF Noise Figure 450 MHz 900 MHz 1500 MHz dB – 1.8 1.9 1.8 2.7 Gain Gain 450 MHz 900 MHz 1500 MHz dB 18.5 21.0 20.2 19.6 21.5 OIP3 [2, 4] Output Third Order Intercept Point 450 MHz 900 MHz 1500 MHz dBm 37 40.5 41.0 41.0 – LFOM [3] Linearity Figure of Merit 450 MHz 900 MHz 1500 MHz dBm P1dB Output Power at 1dB Gain Compression 450 MHz 900 MHz 1500 MHz dBm PAE Power Added Efficiency at P1dB 450 MHz 900 MHz 1500 MHz % 45.3 43.9 42.5 IRL Input Return Loss 450 MHz 900 MHz 1500 MHz dB 15.3 16.7 18.7 ORL Output Return Loss 450 MHz 900 MHz 1500 MHz dB 13.8 15.9 12.0 ISOL Isolation 450 MHz 900 MHz 1500 MHz dB 25.2 25.7 26.7 15.5 16.5 16.8 19.5 22.1 21.2 21.1 – Notes: 1. Measurements obtained from test circuit and demoboard detailed in Figures 46 and 47 and Table 3. 2. OIP3 test condition: F1 – F2 = 1 MHz, with input power of -12 dBm per tone measured at worst case side band. 3. LFOM is defined as LFOM = OIP3 (in dBm) – PDC (in dBm). It is a measure of the linearity of an amplifier per unit of DC power consumed. 4. Demoboard tuned to best OIP3 with minimum over-temperature drift. 2 MGA-31716 Consistency Distribution Chart [1, 2] LSL USL USL 40 50 60 70 80 Figure 2. Id @ 900 MHz; LSL = 37 mA, Nominal = 58 mA, USL = 83 mA LSL 1.6 20 21 2.2 2.4 2.6 LSL 36 Figure 4. Gain @ 900 MHz; LSL = 18.5 dB, Nominal = 20.2 dB, USL = 21.5 dB 2 Figure 3. NF @ 900 MHz; Nominal = 1.9 dB, USL = 2.7 dB USL 19 1.8 38 40 42 44 46 48 50 52 54 56 Figure 5. OIP3 @ 900 MHz; Nominal = 41 dBm, LSL = 37 dBm LSL 20 21 22 23 24 Figure 6. P1dB @ 900 MHz; Nominal = 21.2 dBm, LSL = 19.5 dBm Notes: 1. Data sample size is 4000 samples taken from 4 different wafers and 2 different lots. Future wafers allocated to this product may have nominal values anywhere between the upper and lower limits. 2. Measurements are made on production test board which represents a trade-off between optimal Gain, NF, OIP3 and P1dB. Circuit losses have been de-embedded from actual measurements. 3 MGA-31716 Typical Performance Data for 450 MHz TC = 25° C, Vd = 5.0 V, Id = 63 mA (Based on BOM for 450 MHz optimal linearity tuning in Table 3) 42 40 OIP3 (dBm) OIP3 (dBm) 38 36 34 32 25° C -40° C 85° C 30 28 -20 -19 -18 -17 -16 -15 -14 -13 -12 -11 -10 -9 Pin (dBm) -8 -7 Figure 7. OIP3 vs Pin and Temperature Input Return Loss (dB) 21 Gain (dB) 20 19 18 17 25° C -40° C 85° C 16 250 350 450 550 Frequency (MHz) 650 750 Figure 9. Gain vs Frequency and Temperature 450 550 Frequency (MHz) 650 750 0 -2 -4 -6 -8 -10 -12 -14 -16 -18 -20 150 25° C -40° C 85° C 250 350 450 550 Frequency (MHz) 650 750 -10 -25 -26 Isolation (dB) Output Return Loss (dB) 350 -24 25° C -40° C 85° C -5 -15 -20 -27 -28 -25 -29 -30 -30 250 350 450 550 Frequency (MHz) Figure 11. ORL vs Frequency and Temperature 4 250 Figure 10. IRL vs Frequency and Temperature 0 -35 150 25° C -40° C 85° C Figure 8. OIP3 vs Frequency and Temperature 22 15 150 44 42 40 38 36 34 32 30 28 26 24 150 650 750 -31 25° C -40° C 85° C 150 250 350 450 550 Frequency (MHz) Figure 12. Isolation vs Frequency and Temperature 650 750 MGA-31716 Typical Performance Data for 450 MHz TC = 25° C, Vd = 5.0 V, Id = 63 mA (Based on BOM in Table 3, tuned for optimal linearity with over temperature) 23 3.0 22 2.5 Noise Figure (dB) 20 19 18 25° C -40° C 85° C 17 250 350 450 550 Frequency (MHz) 650 1.0 0.0 150 750 Figure 13. P1dB vs Frequency and Temperature 25° C -40° C 85° C 250 350 450 550 Frequency (MHz) 25° C -40° C 85° C 64 40.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Vd (Volt) 63 62 40.0 61 39.5 39.0 38.5 1000 60 59 OIP3 at R2 = 560 : Current at R2 = 560 : 1100 1200 1300 R1 (Ohm) 58 1400 Figure 16. OIP3 and Quiescent Current with different R1 [1] Figure 15. Current vs Voltage and Temperature 41.5 67 41.0 66 65 64 40.0 63 39.5 62 Id (mA) OIP3 (dBm) 40.5 61 39.0 60 38.5 38.0 470 OIP3 at R1 = 1.2 k: Current at R1 = 1.2 k: 500 530 560 590 R2 (Ohm) 59 620 650 58 680 Figure 17. OIP3 and Quiescent Current with different R2 [1] Note: 1. Vbias and Vctrl can be externally controlled by change external biasing resistors R1 = Rbias and R2 = Rctrl (as shown in Fig. 46). 5 750 65 41.0 100 90 80 70 60 50 40 30 20 10 0 650 Figure 14. Noise Figure vs Frequency and Temperature OIP3 (dBm) Id (mA) 1.5 0.5 16 150 2.0 57 1500 Id (mA) P1dB (dBm) 21 MGA-31716 Typical Performance Data for 450 MHz TC = 25° C, Vd = 5.0 V, Id = 63 mA (Based on BOM in Table 3, tuned for optimal linearity with over temperature) 72 22.2 22.3 72 22.2 71 22.0 22.1 22.0 70 21.9 69 21.9 1000 P1dB at R2 = 560 : Current at R2 = 560 : 1100 1200 1300 R1 (Ohm) 69 21.8 1400 Figure 18. P1dB and Quiescent Current with different R1 [1] 68 1500 21.7 470 P1dB at R1 = 1.2 k: Current at R1 = 1.2 k: 500 530 560 590 R2 (Ohm) 620 650 Figure 19. P1dB and Quiescent Current with different R2 [1] Note: 1. Vbias and Vctrl can be externally controlled by change external biasing resistors R1 = Rbias and R2 = Rctrl (as shown in Fig. 46). 6 68 680 Id (mA) 70 P1dB (dBm) 22.1 Id (mA) P1dB (dBm) 71 MGA-31716 Typical Performance Data for 900 MHz TC = 25° C, Vd = 5.0 V, Id = 58 mA (Based on BOM in Table 3, tuned for optimal linearity with over temperature) 42 38 OIP3 (dBm) OIP3 (dBm) 40 36 34 25° C -40° C 85° C 32 30 -20 -19 -18 -17 -16 -15 -14 -13 -12 -11 -10 -9 Pin (dBm) -8 -7 Figure 20. OIP3 vs Pin and Temperature 45 44 43 42 41 40 39 38 37 36 35 34 33 600 25° C -40° C 85° C 700 800 900 1000 Frequency (MHz) 1100 1200 1100 1200 Figure 21. OIP3 vs Frequency and Temperature -4 21 -6 19 18 25° C -40° C 85° C 17 16 600 700 800 900 1000 Frequency (MHz) 1100 -12 -14 -16 -18 -22 600 0 -24 -5 -25 -10 -15 -20 -25 600 25° C -40° C 85° C 700 25° C -40° C 85° C 700 800 900 1000 Frequency (MHz) Figure 23. IRL vs Frequency and Temperature Isolation (dB) Output Return Loss (dB) -8 -10 -20 1200 Figure 22. Gain vs Frequency and Temperature -26 -27 -28 25° C -40° C 85° C -29 800 900 1000 Frequency (MHz) Figure 24. ORL vs Frequency and Temperature 7 Input Return Loss (dB) Gain (dB) 20 1100 1200 -30 600 700 800 900 1000 Frequency (MHz) Figure 25. Isolation vs Frequency and Temperature 1100 1200 MGA-31716 Typical Performance Data for 900 MHz TC = 25° C, Vd = 5.0 V, Id = 58 mA (Based on BOM in Table 3, tuned for optimal linearity with over temperature) 22.0 3.0 21.5 2.5 Noise Figure (dB) 20.5 20.0 19.5 19.0 25° C -40° C 85° C 18.5 18.0 600 700 800 900 1000 Frequency (MHz) 1100 25° C -40° C 85° C OIP3 (dBm) Id (mA) 40 30 20 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Vd (Volt) 800 900 1000 Frequency (MHz) 1100 41.0 63 40.5 61 40.0 59 39.5 57 39.0 55 38.0 1200 OIP3 at R2 = 560 : Current at R2 = 560 : 1300 1400 1500 1600 R1 (Ohm) 53 1700 62 42.0 61 41.5 60 41.0 59 40.5 58 40.0 57 39.5 56 39.0 Id (mA) 42.5 55 OIP3 at R1 = 1.5 k: Current at R1 = 1.5 k: 500 530 560 590 R2 (Ohm) 54 620 650 53 680 Figure 30. OIP3 and Quiescent current with different R2 [1] Note: 1. Vbias and Vctrl can be externally controlled by change external biasing resistors R1 = Rbias and R2 = Rctrl (as shown in Fig. 46). 8 1200 65 Figure 29. OIP3 and Quiescent current with different R1 [1] Figure 28. Current vs Voltage and Temperature 38.0 470 700 41.5 38.5 10 38.5 25° C -40° C 85° C Figure 27. Noise Figure vs Frequency and Temperature 50 OIP3 (dBm) 1.0 0.0 600 1200 80 60 1.5 0.5 Figure 26. P1dB vs Frequency and Temperature 70 2.0 51 1800 Id (mA) P1dB (dBm) 21.0 MGA-31716 Typical Performance Data for 900 MHz 21.3 68 66 65 21.1 21.0 1200 64 P1dB at R2 = 560 : Current at R2 = 560 : 1300 1400 1500 1600 R1 (Ohm) 1700 Figure 31. P1dB and Quiescent current with different R1 [1] 63 1800 P1dB (dBm) 21.2 Id (mA) P1dB (dBm) 67 21.3 67 21.2 66 21.1 65 21.0 64 P1dB at R1 = 1.5 k: Current at R1 = 1.5 k: 20.9 63 410 440 470 500 530 560 590 620 650 680 R2 (Ohm) Figure 32. P1dB and Quiescent current with different R2 [1] Note: 1. Vbias and Vctrl can be externally controlled by change external biasing resistors R1 = Rbias and R2 = Rctrl (as shown in Fig. 46). 9 Id (mA) TC = 25° C, Vd = 5.0 V, Id = 58 mA (Based on BOM in Table 3, tuned for optimal linearity with over temperature) MGA-31716 Typical Performance Data for 1500 MHz TC = 25° C, Vd = 5.0 V, Id = 54 mA (Based on BOM in Table 3, tuned for optimal linearity with over temperature) 46 44 40 OIP3 (dBm) OIP3 (dBm) 42 38 36 34 25° C -40° C 85° C 32 30 -20 -19 -18 -17 -16 -15 -14 -13 -12 -11 -10 -9 Pin (dBm) -8 -7 Figure 33. OIP3 vs Pin and Temperature -9 20.5 -11 Gain (dB) 19.5 19.0 18.5 18.0 25° C -40° C 85° C 17.5 1300 1400 1500 1600 Frequency (MHz) 1700 Input Return Loss (dB) 21.0 17.0 1200 25° C -40° C 85° C 1300 1800 Figure 35. Gain vs Frequency and Temperature 1800 1700 1800 1700 1800 -13 -15 -17 -19 -21 25° C -40° C 85° C -23 1200 1300 1400 1500 1600 Frequency (MHz) -25.5 25° C -40° C 85° C -26.0 Isolation (dB) -5 -10 -26.5 -27.0 -27.5 -15 25° C -40° C 85° C -28.0 1300 1400 1500 1600 Frequency (MHz) Figure 37. ORL vs Frequency and Temperature 10 1700 Figure 36. IRL vs Frequency and Temperature 0 -20 1200 1400 1500 1600 Frequency (MHz) Figure 34. OIP3 vs Frequency and Temperature 20.0 Output Return Loss (dB) 45 44 43 42 41 40 39 38 37 36 35 34 33 32 1200 1700 1800 -28.5 1200 1300 1400 1500 1600 Frequency (MHz) Figure 38. Isolation vs Frequency and Temperature MGA-31716 Typical Performance Data for 1500 MHz 22.0 3.0 21.5 2.5 Noise Figure (dB) 21.0 20.5 20.0 25° C -40° C 85° C 19.5 19.0 1200 1300 1400 1500 1600 Frequency (MHz) 1700 1.0 0.0 1200 1800 25° C -40° C 85° C 1300 1400 1500 1600 Frequency (MHz) 1700 43.0 25° C -40° C 85° C 70 60 42.5 42.0 OIP3 (dBm) 50 40 30 41.5 41.0 40.5 20 40.0 10 39.5 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Vd (Volt) 55 44.0 54 43.0 53 42.0 52 41.0 51 610 660 710 R2 (Ohm) 1500 1600 1700 R1 (Ohm) 1800 1900 50 OIP3 at R1 = 1.6 k: Current at R1 = 1.6 k: 560 1400 Id (mA) 45.0 39.0 510 39.0 1300 OIP3 at R2 = 620 : Current at R2 = 620 : Figure 42. OIP3 and Quiescent current with different R1 [1] Figure 41. Current vs Voltage and Temperature 40.0 760 810 49 Figure 43. OIP3 and Quiescent current with different R2 [1] Note: 1. Vbias and Vctrl can be externally controlled by change external biasing resistors R1 = Rbias and R2 = Rctrl (as shown in Fig. 46). 11 1800 Figure 40. Noise Figure vs Frequency and Temperature 80 Id (mA) 1.5 0.5 Figure 39. P1dB vs Frequency and Temperature OIP3 (dBm) 2.0 56 55 54 53 52 51 50 49 48 47 46 2000 Id (mA) P1dB (dBm) TC = 25° C, Vd = 5.0 V, Id = 54 mA (Based on BOM in Table 3, tuned for optimal linearity with over temperature) MGA-31716 Typical Performance Data for 1500 MHz 21.3 61 58 21.0 20.9 1300 57 P1dB at R2 = 620 : Current at R2 = 620 : 1400 1500 1600 1700 R1 (Ohm) 1800 1900 Figure 44. P1dB and Quiescent current with different R1 [1] 56 2000 P1dB (dBm) P1dB (dBm) 59 21.1 Id (mA) 60 21.2 21.3 61 21.2 60 21.1 59 21.0 58 P1dB at R1 = 1.6 k: Current at R1 = 1.6 k: 20.9 510 57 560 610 660 710 R2 (Ohm) 760 Figure 45. P1dB and Quiescent current with different R2 [1] Note: 1. Vbias and Vctrl can be externally controlled by change external biasing resistors R1 = Rbias and R2 = Rctrl (as shown in Fig. 46). 12 810 Id (mA) TC = 25° C, Vd = 5.0 V, Id = 54 mA (Based on BOM in Table 3, tuned for optimal linearity with over temperature) VDD GND Application Circuit Description and Layout R1 R2 IN L1 C11 C12 L2 AVAGO Technologies Figure 46. Application Circuit Diagram RK_v3.0 C3 C2 C1 C15 OUT C13 C14 QFN3x3 Oct 2010 Figure 47. Demoboard Table 3. Bill of Materials – Tuned for optimal linearity performance at different frequencies Description Optimum linearity at 450 MHz Optimum linearity at 900 MHz Optimum linearity at 1500 MHz Circuit Symbol Size Value Value Value Manufacturer C2 0402 5 pF 5 pF 1 pF Murata C3 0603 2.2 PF 2.2 PF 2.2 PF Murata C11 0402 100 pF 100 pF 100 pF Murata C13 0402 12 pF 3.3 pF 1.8 pF Murata L1 0402 33 nH 8.2 nH 2.4 nH Murata L2 [2] 0402 NR 2.4 pF 1 pF Murata R1 [1] 0402 1.2 k: 1.5 k: 1.6 k: KOA R2 [1] 0402 560 : 560 : 620 : KOA Notes: NR – Not required in actual PCB design 1. R1 and R2 can be varied to bias Vbias and Vctrl which will provide flexibility to have the product operates at desirable Id, LFOM, and OIP3 drift across temperature also P1dB. 2. Capacitor is used at L2. 50 : 50 : 50 : Bias T Bias T Vbias Bias T Vctrl Vd Biasing Network RF out RF in Note: 1. Measurements are conducted on 0.010 inch think ROGER 4350. The input reference plane is at the end of the RFin pin and the output reference plane is at the end of the RFout pin as shown in Figure 48. Figure 48. Circuit to measure de-embedded S-parameters and Noise Parameter in Table 4 and 5. 13 Table 4. MGA-31716 Typical Scattering Parameters TC = 25° C, Vd = 5.0 V, Id = 58 mA, Zo = 50 : (Data is de-embedded to the RFin & RFout pins on package. Measurements were made with Bias-Tees at Vd, Vctrl and Vbias in Figure 48) Freq GHz S11 Mag. S11 dB S11 Ang. S21 Mag. S21 dB S21 Ang. S12 Mag. S12 dB S12 Ang. S22 Mag. S22 dB S22 Ang. K Factor 0.10 0.160 -15.9 177.0 12.600 22.0 158.0 0.057 -25.0 -12.8 0.156 -16.1 177.0 1.046 0.20 0.152 -16.4 163.0 12.300 21.8 143.0 0.057 -24.9 -29.7 0.153 -16.3 149.0 1.056 0.30 0.150 -16.5 152.0 12.100 21.7 127.0 0.056 -25.1 -43.3 0.145 -16.8 125.0 1.068 0.40 0.149 -16.5 142.0 12.000 21.6 111.0 0.056 -25.1 -58.6 0.139 -17.2 105.0 1.072 0.50 0.155 -16.2 133.0 11.900 21.5 94.0 0.055 -25.2 -73.0 0.132 -17.6 83.8 1.080 0.60 0.157 -16.1 120.0 11.700 21.4 77.5 0.054 -25.3 -87.4 0.123 -18.2 62.3 1.091 0.70 0.162 -15.8 110.0 11.600 21.3 60.9 0.053 -25.4 -102.0 0.117 -18.6 40.3 1.103 0.80 0.167 -15.5 96.3 11.500 21.2 44.4 0.053 -25.6 -116.0 0.110 -19.2 17.6 1.114 0.90 0.169 -15.4 83.1 11.300 21.1 27.7 0.052 -25.6 -131.0 0.106 -19.5 -6.7 1.124 1.00 0.173 -15.2 68.8 11.200 21.0 11.0 0.052 -25.7 -145.0 0.102 -19.8 -30.1 1.138 1.10 0.177 -15.0 53.4 11.000 20.9 -5.6 0.051 -25.8 -159.0 0.101 -19.9 -52.4 1.150 1.20 0.177 -15.0 37.1 10.900 20.7 -22.2 0.050 -26.0 -174.0 0.100 -20.0 -76.0 1.170 1.30 0.179 -14.9 19.6 10.700 20.6 -39.0 0.049 -26.2 171.0 0.101 -19.9 -97.3 1.186 1.40 0.181 -14.9 0.5 10.600 20.5 -55.7 0.048 -26.3 156.0 0.103 -19.8 -117.0 1.205 1.50 0.181 -14.9 -19.2 10.400 20.4 -72.5 0.047 -26.5 142.0 0.105 -19.6 -136.0 1.227 1.60 0.182 -14.8 -40.2 10.200 20.2 -89.4 0.046 -26.7 127.0 0.107 -19.4 -154.0 1.255 1.70 0.186 -14.6 -63.3 10.100 20.1 -106.0 0.045 -26.9 112.0 0.109 -19.2 -169.0 1.280 1.80 0.190 -14.4 -87.6 9.920 19.9 -124.0 0.045 -27.0 97.0 0.113 -18.9 174.0 1.306 1.90 0.199 -14.0 -113.0 9.720 19.8 -141.0 0.044 -27.2 82.1 0.113 -18.9 160.0 1.338 2.00 0.215 -13.3 -138.0 9.510 19.6 -158.0 0.042 -27.5 66.8 0.117 -18.6 147.0 1.378 2.10 0.235 -12.6 -163.0 9.290 19.4 -176.0 0.041 -27.7 51.4 0.120 -18.4 135.0 1.416 2.20 0.260 -11.7 172.0 9.030 19.1 166.0 0.040 -28.0 35.4 0.124 -18.2 122.0 1.462 2.30 0.293 -10.7 147.0 8.740 18.8 149.0 0.038 -28.4 19.9 0.128 -17.8 112.0 1.518 2.40 0.329 -9.7 123.0 8.430 18.5 131.0 0.036 -28.8 3.6 0.137 -17.3 99.7 1.581 2.50 0.369 -8.7 99.9 8.090 18.2 113.0 0.035 -29.2 -12.9 0.143 -16.9 88.0 1.645 3.00 0.602 -4.4 -5.8 5.990 15.5 22.4 0.026 -31.9 -92.1 0.212 -13.5 24.4 2.073 3.50 0.779 -2.2 -96.4 3.830 11.7 -63.3 0.017 -35.4 -168.0 0.302 -10.4 -45.9 2.787 4.00 0.863 -1.3 -174.0 2.290 7.2 -141.0 0.011 -38.8 124.0 0.381 -8.4 -114.0 4.181 5.00 0.887 -1.1 52.5 0.838 -1.5 80.8 0.007 -42.6 -3.9 0.476 -6.4 121.0 13.380 6.00 0.887 -1.0 -69.8 0.353 -9.1 -45.3 0.007 -42.8 -129.0 0.500 -6.0 3.2 31.411 7.00 0.900 -0.9 173.0 0.159 -16.0 -168.0 0.008 -42.0 111.0 0.526 -5.6 -115.0 54.716 8.00 0.902 -0.9 61.0 0.075 -22.5 72.4 0.008 -41.5 -2.2 0.566 -5.0 131.0 99.527 9.00 0.888 -1.0 -47.5 0.038 -28.3 -49.7 0.009 -40.5 -117.0 0.585 -4.7 22.3 192.476 10.00 0.873 -1.2 -155.0 0.021 -33.5 -175.0 0.010 -40.0 128.0 0.584 -4.7 -88.3 375.167 11.00 0.870 -1.2 95.6 0.014 -37.3 54.6 0.010 -39.8 15.9 0.590 -4.6 159.0 572.555 12.00 0.878 -1.1 -13.8 0.009 -40.5 -75.5 0.009 -40.8 -99.3 0.619 -4.2 44.2 821.109 13.00 0.881 -1.1 -117.0 0.004 -48.3 143.0 0.005 -45.7 130.0 0.684 -3.3 -71.2 2981.617 14.00 0.877 -1.1 146.0 0.011 -39.5 103.0 0.009 -41.1 92.2 0.744 -2.6 180.0 557.304 15.00 0.860 -1.3 45.8 0.006 -44.6 -26.7 0.005 -45.5 -34.7 0.795 -2.0 68.4 1534.771 16.00 0.840 -1.5 -67.3 0.007 -42.8 -46.8 0.007 -43.0 -58.6 0.711 -3.0 -71.0 1428.991 17.00 0.849 -1.4 -178.0 0.013 -38.0 173.0 0.012 -38.3 161.0 0.560 -5.0 165.0 624.270 18.00 0.863 -1.3 86.1 0.013 -37.9 59.9 0.012 -38.2 46.2 0.528 -5.6 75.7 583.097 19.00 0.862 -1.3 -7.0 0.014 -37.0 -48.0 0.014 -37.3 -60.8 0.516 -5.8 -12.9 486.734 20.00 0.839 -1.5 -105.0 0.013 -37.8 -177.0 0.016 -36.0 165.0 0.463 -6.7 -117.0 574.400 14 MGA-31716 Stability TC = 25° C, Vd = 5.0 V, Id = 58 mA, Zo = 50 : (Data is de-embedded to the RFin & RFout pins. Measurements were made with Bias-T at Vd, Vctrl and Vbias in Figure 48) 10 9 8 7 6 5 4 3 2 1 0 K Factor K Factor 0 2 4 6 8 10 12 Frequency (GHz) 14 16 18 20 Figure 49. K-Factor vs Frequency Table 5. MGA-31716 Typical Noise Parameters TC = 25° C, Vd = 5.0 V, Id = 58 mA, Zo = 50 : (Data is de-embedded to the RFin & RFout pins on package. Measurements were made with Bias-Tees at Vd, Vctrl and Vbias in Figure 48) Freq (GHz) Fmin (dB) *opt Mag *opt Ang Rn/Z0 Ga (dB) 0.5 1.46 0.159 -146.4 0.1272 21.43 0.8 1.55 0.120 -132.4 0.1384 21.22 0.9 1.60 0.105 -129.3 0.1440 21.13 1.0 1.63 0.097 -124.0 0.1546 21.10 1.5 1.74 0.043 -47.2 0.1972 20.43 2.0 1.92 0.168 36.3 0.2498 19.74 2.5 2.24 0.327 78.4 0.2862 18.89 3.0 2.52 0.544 109.3 0.3296 17.89 3.5 2.87 0.672 138.0 0.4130 18.56 4.0 3.38 0.781 159.6 0.5284 15.33 4.5 4.23 0.85 175.2 0.9124 13.18 5.0 5.12 0.881 -163.3 1.4458 11.13 5.5 6.54 0.919 -148.4 2.9438 7.73 6.0 7.84 0.916 -141.4 4.2160 5.92 15 PCB Layout and Stencil Design 2.92 3.20 0.32 Chamfer 0.24 0.50 0.50 Chamfer 0.192 Chamfer 0.06 ø 0.26 0.56 1.24 0.21 1.55 0.23 0.49 0.32 0.35 0.50 1.24 1.55 PCB LAND PATTERN (TOP VIEW) STENCIL OUTLINE 3.20 0.50 0.50 0.23 1.24 1.55 0.21 0.36 Notes: 1. All dimensions are in milimeters 2. 4mil stencil thickness recommended 16 1.24 1.55 COMBINED PCB & STENCIL LAYOUTS Package Dimensions Pin 1 dot By marking 3.00 ±0.10 1.55 ±0.05 Exp.DAP 0.20 Ref. Pin #1 identification Chamfer 0.30 x 45° 0.40 ±0.05 3.00 ±0.10 0.50 Bsc 31716 YYWW XXXX 1.55 ±0.05 Exp.DAP 0.23 ±0.05 0.00 ±0.05 0.85 ±0.05 TOP VIEW SIDE VIEW Notes: 1. All dimensions are in milimeters. 2. Dimensions are inclusive of plating. 3. Dimensions are exclusive of mold flash and metal burr. Part Number Ordering Information Part Number No. of Devices Container MGA-31716-BLKG 100 Antistatic Bag MGA-31716-TR1G 3000 13” Tape/Reel 17 1.50 Ref. BOTTOM VIEW Device Orientation REEL USER FEED DIRECTION CARRIER TAPE USER FEED DIRECTION 31716 YYWW XXXX 31716 YYWW XXXX 31716 YYWW XXXX TOP VIEW END VIEW COVER TAPE Tape Dimensions 2.0 ± 0.1[1] 0.3 ±0.05 4.0 ±0.1[2] 1.75 ± 0.1 1.55 ±0.05 5.5 ±0.1[1] CL 3.3 ±0.1 1.6 ± 0.1 12.0 ± 0.3 R 0.3 Typical 1.55 ±0.1 8.0 ±0.1 Notes: 1. Measured from centerline of sprocket hole to centerline of pocket 2. Cumulative tolerance of 10 sprocket holes is ±0.20 3. Other material available 4. All dimensions in millimeter unless otherwise stated 18 3.3±0.1 Reel Dimension – 13” Reel 12 mm Width 11 12 1 2 3 4 0 2 10 9 7 6 5 DATE CODE 12MM 8 EMBOSSED LETTERING 16.0 mm HEIGHT x MIN. 0.4 mm THICK. Ø329.0±1.0 HUB Ø100.0±0.5 6 PS 0 2 1 1112 2 3 10 4 9 8 7 6 5 MP N CPN EMBOSSED LETTERING 7.5 mm HEIGHT EMBOSSED LETTERING 7.5 mm HEIGHT Ø13.0 +0.5 -0.2 20.2 (MIN.) (MI N.) FRONT VIEW 1.5 EMBOSSED LINE (2x) 89.0 mm LENGTH LINES 147.0 mm AWAY FROM CENTER POINT Ø16.0 11.9-15.4** ESD LOGO Detail "X" 12.4 +2.0* -0.0 6 PS RECYCLE LOGO SEE DETAIL "X" Ø100.0±0.5 Ø329.0±1.0 6 PS SLOT 5.0±0.5 (3x) R19.0±0.5 Ø12.3±0.5(3x) BACK VIEW For product information and a complete list of distributors, please go to our web site: 18.4 MAX.* www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. AV02-3264EN - December 8, 2011