Q68-Z Series - Zigbee H.A 1.2 compatible External Antenna Stud-mount metal case Input voltage from 110-277Vac Soft-start with low inrush current Turn-on time less than 1 second SPECIFICATIONS : Input Range : 100 ~ 277VAC Power Factor: > 0.92 at 65% to 100% load, 115VAC or 230VAC Input Current : 0.83 Amps max. at 115VAC Output Current Regulation : ±3% Protection : OCP, SCP, OLP – Auto Recovery Control : 0-10V dimmer; PWM (250-3KHz); Potentiometer; Enable Hold up time: Half cycle min. at 120VAC and 80% rated load Frequency : 47 to 63Hz ° Inrush Current : 35.0 Amps max. at 230VAC, cold start 25 C Efficiency : 87% Typical Maximum Power : 70W Leakage Current : 50uA typ. Dimension: XP: TBD / XM:108.3x76.3x30mm (LxWxH) Regulation Compliance: UL8750 or EN61347, EN55015, EN61547 MODEL SELECTION : Model Number Constant Voltage Mode V (DC) A (mA) Max. W 24, ±5% 2830 70 Q68-U24-Xz 36, ±5% 1880 70 Q68-U36-Xz 48, ±5% 1410 70 Q68-U48-Xz Notes: 1. “Xz” is optional : “Blank” = 5VA plastic case ; “Xp” = 94V-0 plastic case ; “Xm” = stud-mount metal case 2. yyyy = Output current 3. 72VDC output is not UL certified Model Number Q68-U24-Cyyyy-Xz Q68-U30-Cyyyy-Xz Q68-U36-Cyyyy-Xz Q68-U42-Cyyyy-Xz Q68-U48-Cyyyy-Xz Q68-U54-Cyyyy-Xz Q68-U72-Cyyyy-Xz Constant Current Mode A (mA) V (DC) Max. W 3150 ~ 1450 2500 ~ 1200 2080 ~ 950 1780 ~ 810 1560 ~ 710 1380 ~ 630 1050 ~ 480 14 ~ 24 19 ~ 30 23 ~ 36 27 ~ 42 30 ~ 48 34 ~ 54 47 ~ 72 70 70 70 70 70 70 70 Indicator and output functions LED Indicators Solid on (Power On) Blinking (Netword Error) 5.01 [127.3] Rst Reset Button 4.26 [108.3] Ext. Antenna External Antenna connector 4.74 [120.3] Units: IN [mm] 0.16 [4.0] 0.16 [4.0] 0.28 [7.0] 1.61 [40.8] R0.20 [R5.0] 0.20 [5.0] 3.00 [76.3] 1.02 [26.0] 0.81 [20.5] Rec 0.43x0.63 [11.0x16.0] 0.43 [11.0] Rec 0.43x1.02 [11.0x26.0] 1.18 [30.0] 2.00 [50.8] www.magtechind.com 702-364-9998 [email protected]