MAPDCC0010 Low Cost Two-Way GMIC SMT Power Divider, 2200 - 2500 MHz Rev. V2 Features • • • • • • • • • Small Size and Low Profile Typical Insertion Loss: 1.0 dB Typical Amplitude Balance: 0.1 dB 1 Watt Power Handling Lead-Free SOT-25 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of DS52-0007 Functional Block Diagram GND RF IN 4 5 Description M/A-COM’s MAPDCC0010 is an IC-based monolithic power divider using M/A-COM’s GMIC technology in a low cost SOT-25 plastic package. This 2way power divider is ideally suited for applications where small size, low insertion loss, superior phase/ amplitude tracking and low cost are required. Typical applications include handsets, base station switching networks and other communication applications where size and PCB real estate are at a premium. Available in Tape and Reel. 1 2 3 RF2 (Out) RF1 (Out) GND The MAPDCC0010 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. Ordering Information Pin Configuration Part Number Package MAPDCC0010 Bulk Packaging MAPDCC0010-TR 1000 piece reel 2 GND Sample Test Board 3 RF2 (OUT) 4 GND 5 RF IN MAPDCC0010-TB Note: Reference Application Note M513 for reel size information. Pin No. Function 1 RF1 (OUT) * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0010 Low Cost Two-Way GMIC SMT Power Divider, 2200 - 2500 MHz Rev. V2 Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Frequency Units Min Typ Max Insertion Loss (above 3.0 dB theoretical loss) 2200 - 2500 MHz dB — 1.0 1.1 Isolation 2200 - 2500 MHz dB 15 22 — Input VSWR 2200 - 2500 MHz Ratio — 1.6:1 1.8:1 Output VSWR 2200 - 2500 MHz Ratio — 1.3:1 1.5:1 Amplitude Balance 2200 - 2500 MHz dB — 0.1 — Phase Balance 2200 - 2500 MHz ° — 2 — Absolute Maximum Ratings 1,2 Parameter Input Power 3 Absolute Maximum 1 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Recommended PCB Configuration 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 3. With internal load dissipation of 0.125 W maximum. Handling Procedures Please observe the following precautions to avoid damage: Dimensions in inches. Circuit Material: FR-4, .016 Thick. Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0010 Low Cost Two-Way GMIC SMT Power Divider, 2200 - 2500 MHz Rev. V2 Typical Performance Curves @ 25ºC Isolation vs. Frequency Insertion Loss vs. Frequency 1.5 26 Isolation (dB) Insertion Loss (dB) 24 1.0 0.5 22 20 18 16 0.0 2200 2275 2350 2425 14 2200 2500 Fre que ncy (MHz ) 2275 2350 2425 2500 Fre que ncy (MHz ) VSWR vs. Frequency Lead-Free, SOT-25† Inp ut Out p ut 2.0 VSW R 1.8 1.6 1.4 1.2 1.0 2200 2275 2350 2425 2500 Frequency (MHz) † Reference Application Note M538 for lead-free solder reflow recommendations. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.