Series AM15E-IZ 15 Watt | DC-DC Converter FEATURES: Models Single output Model AM15E-1203SIZ AM15E-1205SIZ AM15E-1212SIZ AM15E-1215SIZ AM15E-2403SIZ AM15E-2405SIZ AM15E-2412SIZ AM15E-2415SIZ AM15E-4803SIZ AM15E-4805SIZ AM15E-4812SIZ AM15E-4815SIZ AM15E-1203SH30IZ AM15E-1205SH30IZ AM15E-1212SH30IZ AM15E-1215SH30IZ AM15E-2403SH30IZ AM15E-2405SH30IZ AM15E-2412SH30IZ AM15E-2415SH30IZ AM15E-4803SH30IZ AM15E-4805SH30IZ AM15E-4812SH30IZ AM15E-4815SH30IZ Models Dual output Model AM15E-1205DIZ AM15E-1212DIZ AM15E-1215DIZ AM15E-2405DIZ AM15E-2412DIZ AM15E-2415DIZ AM15E-4805DIZ AM15E-4812DIZ AM15E-4815DIZ AM15E-1205DH30IZ AM15E-1212DH30IZ AM15E-1215DH30IZ www.aimtec.com F 051e R12.C • • • • • RoHS compliant 2:1 input range Low ripple and noise • • • • Remote On/Off control Synchronous rectifier Power modules for PCB mounting Regulated output Operating temperature range: -40 to +85ºC Capacitive loading up to 41000 µF (36-75V input) Input Voltage (V) Output Voltage (V) Output Current max (A) Ripple & Noise typ Isolation (VDC) Efficiency (%) 3.3 5 12 15 3.3 5 12 15 3.3 5 12 15 4 3 1.25 1 4 3 1.25 1 4 3 1.25 1 80mV p-p 80mV p-p 120mVp-p 150mVp-p 80mV p-p 80mV p-p 120mVp-p 150mVp-p 80mV p-p 80mV p-p 120mVp-p 150mVp-p 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 79 83 85 85 81 83 88 87 81 83 88 87 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 3.3 5 12 15 3.3 5 12 15 3.3 5 12 15 4 3 1.25 1 4 3 1.25 1 4 3 1.25 1 80mV p-p 80mV p-p 120mVp-p 150mVp-p 80mV p-p 80mV p-p 120mVp-p 150mVp-p 80mV p-p 80mV p-p 120mVp-p 150mVp-p 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 74 78 82 83 75 77 84 83 75 76 85 85 Input Voltage (V) Output Voltage (V) Output Current max (A) Ripple & Noise typ Isolation (VDC) Efficiency (%) ±5 ±12 ±15 ±5 ±12 ±15 ±5 ±12 ±15 ±1.5 ±0.62 ±0.5 ±1.5 ±0.62 ±0.5 ±1.5 ±0.62 ±0.5 50mVp-p 120mVp-p 150mVp-p 50mVp-p 120mVp-p 150mVp-p 50mVp-p 120mVp-p 150mVp-p 1500 1500 1500 1500 1500 1500 1500 1500 1500 85 85 85 83 88 87 83 88 87 ±5 ±12 ±15 ±1.5 ±0.62 ±0.5 50mVp-p 120mVp-p 150mVp-p 3000 3000 3000 78 82 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 9-18 9-18 9-18 18-36 18-36 18-36 36-75 36-75 36-75 9-18 9-18 9-18 Tel: +1 514 620 2722 1 of 5 81 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15E-IZ Models Dual output (continued) Model AM15E-2405DH30IZ AM15E-2412DH30IZ AM15E-2415DH30IZ AM15E-4805DH30IZ AM15E-4812DH30IZ AM15E-4815DH30IZ Input Voltage (V) 18-36 18-36 18-36 36-75 36-75 36-75 15 Watt | DC-DC Converter Output Voltage (V) ±5 ±12 ±15 ±5 ±12 ±15 Output Current max (A) Ripple & Noise typ Isolation (VDC) Efficiency (%) ±1.5 ±0.62 ±0.5 ±1.5 ±0.62 ±0.5 50mVp-p 120mVp-p 150mVp-p 50mVp-p 120mVp-p 150mVp-p 3000 3000 3000 3000 3000 3000 80 82 84 76 83 85 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Voltage range Filter Remote On/Off Control Absolute Maximum Rating Permissible absolute maximum duration Recommended Input Fuse (slow blow) Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Output Specifications Parameters Voltage accuracy Short Circuit protection Short Circuit restart Over voltage protection Over load protection Line voltage regulation (Single) Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Dual) Temperature coefficient Transient response recovery time www.aimtec.com F 051e R12.C Nominal 12 24 48 On Off 12 Vin 24 Vin 48 Vin 12 Vin 24 Vin 48 Vin Conditions 3 sec Conditions HL-LL HL-LL 25-100% 25-100% 25% load step change Typical 9-18 18-36 37-75 Maximum Units VDC π (Pi) Network 3.5 to 12VDC or open circuit 0 to 1.2VDC or short circuit between pin 2 and 4; typical idle current 3mA 25 50 VDC 100 2 h 4A/250V 2A/250V 1A/250V Typical Maximum Typical Maximum 1500 & 3000 > 1000 1000 ±2 Continuous Auto recovery Zener diode clamp protection Over 110% full load with auto-recovery ±0.5 ±0.5 ±0.5 ±2 ±0.05 300 Tel: +1 514 620 2722 2 of 5 Units VDC MOhm pF Units % % % % % %/oC uS Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15E-IZ 15 Watt | DC-DC Converter General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum Case temperature Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Conditions Typical 100% load With derating above +75 Maximum 200 -40 to+75 -55 to +115 Free air convection Units KHz o C o C o C 95 95 Nickel coated copper 33 2.00 x 1.00 x 0.40 inches 50.80 x 25.40 x 10.50 mm > 800 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) % g Safety Specifications Parameters Agency approvals Standards CE EN 55022, EN 55024 class B Pin Out Specifications Pin Single 1 2 3 4 5 6 Dual On/Off Control -V Input +V Input -V Output No pin +V Output On/Off Control -V Input +V Input -V Output Common +V Output Derating 1500 vdc Isolation 3000VDC Isolation Free Air Convection Free Air Convection 75 ºC 80 80 60 Output Power (%) 100 Output Power (%) 100 Safe Operating Area 40 20 Safe Operating Area 60 40 20 0 - 40 50º C - 20 0 20 40 60 80 85 0 100 - 40 - 20 Ambient Temperature º C www.aimtec.com F 051e R12.C 0 20 40 60 80 85 100 Ambient Temperature º C Tel: +1 514 620 2722 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15E-IZ 15 Watt | DC-DC Converter Dimensions 1 10.16 (0.40) Bottom View 5 4 20.32 (0.80) 15.24 (0.60) 2.54 (0.10) 2 10.16 (0.40) 3 7.62 5.08 (0.30) (0.20) 25.40 (1.00) 10.16 (0.40) 6 15.24 (0.60) Notes: All dimensions are typical in millimeters (inches). Tolerance ±0.25 (±0.01) 6.00 (0.24) 10.50 (0.41) DIA 1.00 (0.04) 2.54 (0.10) 50.80 (2.00) Block diagram www.aimtec.com F 051e R12.C Tel: +1 514 620 2722 4 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15E-IZ 15 Watt | DC-DC Converter Control ON/OFF pin connection example: Single Output Dual Output The converter output can be disabled by moving SW to position “a”. When SW is in position “b”, the converter operates normally. The SW can be replaced by a NPN transistor with connection as follows: Note: The control voltage is referenced to negative input (-Vi ) Digital Control Circuit: NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.C Tel: +1 514 620 2722 5 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only