CSD17522Q5A SLPS341A – JUNE 2011 – REVISED AUGUST 2011 www.ti.com 30V, N-Channel NexFET™ Power MOSFETs Check for Samples: CSD17522Q5A FEATURES 1 • • • • • • • • 2 PRODUCT SUMMARY Optimized for 5V Gate Drive Ultralow Qg and Qgd Low Thermal Resistance Avalanche Rated Pb Free Terminal Plating RoHS Compliant Halogen Free SON 5-mm × 6-mm Plastic Package Notebook Point of Load Point-of-Load Synchronous Buck in Networking, Telecom and Computing Systems DESCRIPTION The NexFET™ power MOSFET has been designed to minimize losses in power conversion applications, and optimized for 5V gate drive applications. Figure 1. Top View S 1 8 D S 2 7 D S 3 6 D G 4 5 D Drain to Source Voltage 30 V Qg Gate Charge Total (4.5V) 3.6 nC Qgd Gate Charge Gate to Drain RDS(on) Drain to Source On Resistance VGS(th) Threshold Voltage 1.1 nC VGS = 4.5V 10 mΩ VGS = 10V 6.7 mΩ 1.6 V ORDERING INFORMATION APPLICATIONS • • VDS Device Package Media CSD17522Q5A SON 5-mm × 6-mm Plastic Package 13-Inch Reel Qty Ship 2500 Tape and Reel ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise stated VALUE UNIT VDS Drain to Source Voltage 30 V VGS Gate to Source Voltage ±20 V Continuous Drain Current, TC = 25°C 87 A Continuous Drain Current(1) 16 A IDM Pulsed Drain Current, TA = 25°C(2) 104 A PD Power Dissipation(1) 3 W TJ, TSTG Operating Junction and Storage Temperature Range –55 to 150 °C EAS Avalanche Energy, single pulse ID = 33A, L = 0.1mH, RG = 25Ω 54 mJ ID (1) Typical RθJA = 41°C/W on a 1-inch2 (6.45-cm2), 2-oz. (0.071-mm thick) Cu pad on a 0.06-inch (1.52-mm) thick FR4 PCB. (2) Pulse duration ≤300μs, duty cycle ≤2% D P0093-01 RDS(on) vs VGS GATE CHARGE 30 20 VGS - Gate-to-Source Voltage (V) RDS(on) - On-State Resistance - mΩ ID = 14A 25 20 15 10 5 0 TC = 25°C TC = 125ºC 0 2 4 6 ID = 14A VDD = 15V 18 16 14 12 10 8 6 4 2 8 10 12 14 VGS - Gate-to- Source Voltage - V 16 18 20 0 0 2 4 6 8 10 12 14 Qg - Gate Charge - nC (nC) 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. NexFET is a trademark of Texas Instruments. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2011, Texas Instruments Incorporated CSD17522Q5A SLPS341A – JUNE 2011 – REVISED AUGUST 2011 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise stated) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT Static Characteristics BVDSS Drain to Source Voltage VGS = 0V, ID = 250μA IDSS Drain to Source Leakage Current VGS = 0V, VDS = 24V IGSS Gate to Source Leakage Current VDS = 0V, VGS = ±20V VGS(th) Gate to Source Threshold Voltage VDS = VGS, ID = 250μA RDS(on) Drain to Source On Resistance gfs Transconductance 30 1.1 V 1 μA 100 nA 1.6 2.0 V VGS = 4.5V, ID = 14A 10 12.4 mΩ VGS = 10V, ID = 14A 6.7 8.1 mΩ VDS = 15V, ID = 14A 37 S Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance RG Series Gate Resistance 4.7 Qg Gate Charge Total (4.5V) 3.6 Qgd Gate Charge Gate to Drain 1.1 nC Qgs Gate Charge Gate to Source 1.6 nC Qg(th) Gate Charge at Vth 0.9 nC Qoss Output Charge 8.6 nC td(on) Turn On Delay Time 6.7 ns tr Rise Time 12 ns td(off) Turn Off Delay Time 10.5 ns tf Fall Time 3.7 ns VGS = 0V, VDS = 15V, f = 1MHz VDS = 15V, ID = 14A VDS = 13V, VGS = 0V VDS = 15V, VGS = 4.5V, IDS = 14A, RG = 2Ω 580 695 pF 390 470 pF 35 44 pF Ω 4.3 nC Diode Characteristics VSD Diode Forward Voltage ISD = 14A, VGS = 0V 0.85 Qrr Reverse Recovery Charge 19.6 nC trr Reverse Recovery Time VDD= 13V, IF = 14A, di/dt = 300A/μs 1 V 17.8 ns THERMAL CHARACTERISTICS (TA = 25°C unless otherwise stated) MAX UNIT RθJC Thermal Resistance Junction to Case (1) PARAMETER 1.8 °C/W RθJA Thermal Resistance Junction to Ambient (1) (2) 51 °C/W (1) (2) 2 MIN TYP RθJC is determined with the device mounted on a 1-inch2 (6.45-cm2), 2-oz. (0.071-mm thick) Cu pad on a 1.5-inch × 1.5-inch (3.81-cm × 3.81-cm), 0.06-inch (1.52-mm) thick FR4 PCB. RθJC is specified by design, whereas RθJA is determined by the user’s board design. Device mounted on FR4 material with 1-inch2 (6.45-cm2), 2-oz. (0.071-mm thick) Cu. Copyright © 2011, Texas Instruments Incorporated CSD17522Q5A SLPS341A – JUNE 2011 – REVISED AUGUST 2011 www.ti.com GATE GATE Source N-Chan 5x6 QFN TTA MIN Rev3 N-Chan 5x6 QFN TTA MAX Rev3 Max RθJA = 51°C/W when mounted on 1 inch2 (6.45 cm2) of 2-oz. (0.071-mm thick) Cu. Source Max RθJA = 125°C/W when mounted on a minimum pad area of 2-oz. (0.071-mm thick) Cu. DRAIN DRAIN M0137-02 M0137-01 TYPICAL MOSFET CHARACTERISTICS (TA = 25°C unless otherwise stated) ZqJA - Normalized Thermal Impedance 10 1 0.5 0.3 0.1 Duty Cycle = t1/t2 0.1 0.05 P 0.02 0.01 0.01 t1 t2 Single Pulse Typical RqJA = 100°C/W (min Cu) TJ = P ´ ZqJA ´ RqJA 0.001 0.001 0.01 0.1 1 tp - Pulse Duration - s 10 100 1k G012 Figure 2. Transient Thermal Impedance Copyright © 2011, Texas Instruments Incorporated 3 CSD17522Q5A SLPS341A – JUNE 2011 – REVISED AUGUST 2011 www.ti.com TYPICAL MOSFET CHARACTERISTICS (continued) (TA = 25°C unless otherwise stated) TEXT ADDED FOR SPACING TEXT ADDED FOR SPACING 50 40 30 20 10 0 VGS = 4.5V VGS = 8V VGS = 10V VDS = 5V 45 IDS - Drain-to-Source Current - A IDS - Drain-to-Source Current - A 50 40 35 30 T C = 125°C 25 T C = 25°C 20 15 T C = -55°C 10 5 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 1 1.5 2 2.5 VGS - Gate-to-Source Voltage - V VDS - Drain-to-Source Voltage - V Figure 3. Saturation Characteristics TEXT ADDED FOR SPACING TEXT ADDED FOR SPACING 1.8 f = 1MHz VGS = 0V 1.6 16 1.4 C - Capacitance - nF VGS - Gate-to-Source Voltage (V) ID = 14A VDD = 15V 18 14 12 10 8 6 1.2 Coss = Cds + Cgd 1 Ciss = Cgd + Cgs 0.8 0.6 0.4 4 Crss = Cgd 0.2 2 0 0 2 4 6 8 10 12 14 0 5 Qg - Gate Charge - nC (nC) 10 15 20 VDS - Drain-to-Source Voltage - V Figure 5. Gate Charge TEXT ADDED FOR SPACING G004 TEXT ADDED FOR SPACING ID = 14A ID = 250µA RDS(on) - On-State Resistance - mΩ VGS(th) - Threshold Voltage - V 30 30 1.4 1.2 1 0.8 0.6 0.4 0.2 25 20 15 10 5 0 -25 25 75 T C - Case Temperature - °C 125 175 Figure 7. Threshold Voltage vs. Temperature 4 25 Figure 6. Capacitance 1.6 0 -75 G002 Figure 4. Transfer Characteristics 20 0 3 G005 TC = 25°C TC = 125ºC 0 2 4 6 8 10 12 14 16 18 20 VGS - Gate-to- Source Voltage - V Figure 8. On-State Resistance vs. Gate-to-Source Voltage Copyright © 2011, Texas Instruments Incorporated CSD17522Q5A SLPS341A – JUNE 2011 – REVISED AUGUST 2011 www.ti.com TYPICAL MOSFET CHARACTERISTICS (continued) (TA = 25°C unless otherwise stated) TEXT ADDED FOR SPACING TEXT ADDED FOR SPACING 100 ID = 14A VGS = 4.5V 1.4 ISD - Source-to-Drain Current - A Normalized On-State Resistance 1.6 1.2 1 0.8 0.6 0.4 0.2 -75 10 1 T C = 125°C 0.1 T C = 25°C 0.01 0.001 0.0001 -25 25 75 T C - Case Temperature - °C 125 0 175 0.2 Figure 9. Normalized On-State Resistance vs. Temperature TEXT ADDED FOR SPACING G008 TEXT ADDED FOR SPACING I(AV) - Peak Avalanche Current - A IDS - Drain-to-Source Current - A 1.2 1k 100 10 1ms 10ms 100ms 11110 1 Area Limited by RDS(on) 0.01 0.01 1 Figure 10. Typical Diode Forward Voltage 1k 0.1 0.4 0.6 0.8 VSD - Source-to-Drain Voltage - V G007 1s Single Pulse Typical R θJA = 100°C/W (min Cu) DC 0.1 1 10 VDS - Drain-to-Source Voltage - V 100 100 T C = 25°C 10 T C = 125°C 1 0.01 G009 Figure 11. Maximum Safe Operating Area 0.1 1 10 t(AV) - Time in Avalanche - ms 100 G010 Figure 12. Single Pulse Unclamped Inductive Switching TEXT ADDED FOR SPACING IDS - Drain-to-Source Current - A 120 100 80 60 40 20 0 -50 -25 0 25 50 75 100 125 T C - Case Temperature - °C 150 175 G011 Figure 13. Maximum Drain Current vs. Temperature Copyright © 2011, Texas Instruments Incorporated 5 CSD17522Q5A SLPS341A – JUNE 2011 – REVISED AUGUST 2011 www.ti.com MECHANICAL DATA Q5A Package Dimensions L E2 H K 7 D2 3 4 b 4 5 5 6 3 6 e D1 7 2 2 8 8 1 1 q L1 Top View Bottom View Side View c A q E1 E Front View M0135-01 DIM 6 MILLIMETERS MIN NOM MAX A 0.90 1.00 1.10 b 0.33 0.41 0.51 c 0.20 0.25 0.34 D1 4.80 4.90 5.00 D2 3.61 3.81 4.02 E 5.90 6.00 6.10 E1 5.70 5.75 5.80 E2 3.38 3.58 3.78 e 1.17 1.27 1.37 H 0.41 0.56 0.71 K 1.10 L 0.51 0.61 0.71 L1 0.06 0.13 0.20 θ 0° 12° Copyright © 2011, Texas Instruments Incorporated CSD17522Q5A SLPS341A – JUNE 2011 – REVISED AUGUST 2011 www.ti.com Figure 14. Recommended PCB Pattern DIM F1 F7 F3 8 1 F2 F11 F5 F9 5 4 F6 MILLIMETERS INCHES MIN MAX MIN MAX F1 6.205 6.305 0.244 0.248 F2 4.46 4.56 0.176 0.18 F3 4.46 4.56 0.176 0.18 F4 0.65 0.7 0.026 0.028 F5 0.62 0.67 0.024 0.026 F6 0.63 0.68 0.025 0.027 F7 0.7 0.8 0.028 0.031 F8 0.65 0.7 0.026 0.028 F9 0.62 0.67 0.024 0.026 F10 4.9 5 0.193 0.197 F11 4.46 4.56 0.176 0.18 F8 F4 F10 M0139-01 For recommended circuit layout for PCB designs, see application note SLPA005 – Reducing Ringing Through PCB Layout Techniques. K0 4.00 ±0.10 (See Note 1) 0.30 ±0.05 2.00 ±0.05 +0.10 –0.00 12.00 ±0.30 Ø 1.50 1.75 ±0.10 Q5A Tape and Reel Information 5.50 ±0.05 B0 R 0.30 MAX A0 8.00 ±0.10 Ø 1.50 MIN A0 = 6.50 ±0.10 B0 = 5.30 ±0.10 K0 = 1.40 ±0.10 R 0.30 TYP M0138-01 Notes: 1. 10-sprocket hole-pitch cumulative tolerance ±0.2 2. Camber not to exceed 1mm in 100mm, noncumulative over 250mm 3. Material: black static-dissipative polystyrene 4. All dimensions are in mm (unless otherwise specified) 5. A0 and B0 measured on a plane 0.3mm above the bottom of the pocket SPACER Copyright © 2011, Texas Instruments Incorporated 7 CSD17522Q5A SLPS341A – JUNE 2011 – REVISED AUGUST 2011 www.ti.com REVISION HISTORY Changes from Original (June 2011) to Revision A Page • Changed VGS From: +20 / –12V To: ±20V in the Abs Max Ratings table ............................................................................ 1 • Changed IGSS the Test Conditions From: VDS = 0V, VGS = +20/-12V To: VDS = 0V, VGS = ±20V ......................................... 2 8 Copyright © 2011, Texas Instruments Incorporated PACKAGE OPTION ADDENDUM www.ti.com 22-Aug-2011 PACKAGING INFORMATION Orderable Device CSD17522Q5A Status (1) ACTIVE Package Type Package Drawing SON DQJ Pins Package Qty 8 2500 Eco Plan (2) Pb-Free (RoHS Exempt) Lead/ Ball Finish CU SN MSL Peak Temp (3) Samples (Requires Login) Level-1-260C-UNLIM (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 30-May-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device CSD17522Q5A Package Package Pins Type Drawing SON DQJ 8 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 2500 330.0 12.4 Pack Materials-Page 1 6.3 B0 (mm) K0 (mm) P1 (mm) 5.3 1.2 8.0 W Pin1 (mm) Quadrant 12.0 Q1 PACKAGE MATERIALS INFORMATION www.ti.com 30-May-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) CSD17522Q5A SON DQJ 8 2500 340.0 340.0 38.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2012, Texas Instruments Incorporated