TI CSD17551Q5A

CSD17551Q5A
www.ti.com
SLPS375 – MAY 2012
30V, N-Channel NexFET™ Power MOSFETs
Check for Samples: CSD17551Q5A
FEATURES
1
•
•
•
•
•
•
•
PRODUCT SUMMARY
Ultra Low Qg and Qgd
Low Thermal Resistance
Avalanche Rated
Pb Free Terminal Plating
RoHS Compliant
Halogen Free
SON 5-mm × 6-mm Plastic Package
VDS
Drain to Source Voltage
30
V
Qg
Gate Charge Total (4.5V)
6.0
nC
Qgd
Gate Charge Gate to Drain
RDS(on)
Drain to Source On Resistance
VGS(th)
Threshold Voltage
•
nC
9
mΩ
VGS = 10V
7
mΩ
1.7
V
ORDERING INFORMATION
Device
Package
Media
CSD17551Q5A
SON 5-mm × 6-mm
Plastic Package
13-Inch
Reel
APPLICATIONS
•
1.4
VGS = 4.5V
Point of load Synchronous Buck in
Networking, Telecom and Computing Systems
Optimized for Control FET Applications
Qty
Ship
2500
Tape and
Reel
ABSOLUTE MAXIMUM RATINGS
TA = 25°C unless otherwise stated
VALUE
UNIT
DESCRIPTION
VDS
Drain to Source Voltage
30
V
The NexFET power MOSFET has been designed to
minimize losses in power conversion applications.
VGS
Gate to Source Voltage
±20
V
Continuous Drain Current, TC = 25°C
48
A
13.5
A
Figure 1. Top View
S
8
1
D
S
2
7
D
S
3
6
D
G
4
Continuous Drain Current, TA = 25°C(1)
IDM
Pulsed Drain Current, TA = 25°C(2)
85
A
PD
Power Dissipation(1)
3
W
TJ,
TSTG
Operating Junction and Storage
Temperature Range
–55 to 150
°C
EAS
Avalanche Energy, single pulse
ID = 25A, L = 0.1mH, RG = 25Ω
31.3
mJ
(1) Typical RθJA = 41.9°C/W on a 1-inch2 (6.45-cm2),
2-oz. (0.071-mm thick) Cu pad on a 0.06-inch (1.52-mm) thick
FR4 PCB.
(2) Pulse duration ≤300μs, duty cycle ≤2%
D
5
ID
D
P0093-01
RDS(on) vs VGS
GATE CHARGE
10
TC = 25°C Id = 11A
TC = 125ºC Id = 11A
VGS - Gate-to-Source Voltage (V)
RDS(on) - On-State Resistance - mΩ
25
20
15
10
5
0
0
2
4
6
8
10
12
14
16
VGS - Gate-to- Source Voltage - V
18
20
G001
ID = 11A
VDS = 15V
8
6
4
2
0
0
3
6
9
Qg - Gate Charge - nC (nC)
12
15
G001
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated
CSD17551Q5A
SLPS375 – MAY 2012
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ELECTRICAL CHARACTERISTICS
(TA = 25°C unless otherwise stated)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
Static Characteristics
BVDSS
Drain to Source Voltage
VGS = 0V, ID = 250μA
IDSS
Drain to Source Leakage Current
VGS = 0V, VDS = 24V
IGSS
Gate to Source Leakage Current
VDS = 0V, VGS = 20V
VGS(th)
Gate to Source Threshold Voltage
VDS = VGS, ID = 250μA
RDS(on)
Drain to Source On Resistance
gfs
Transconductance
30
1.2
V
1
μA
100
nA
1.7
2.2
V
9
11
mΩ
VGS = 10V, ID = 11A
7
8.8
mΩ
VDS = 15V, ID = 11A
107
VGS = 4.5V, ID = 11A
S
Dynamic Characteristics
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
RG
Series Gate Resistance
Qg
Gate Charge Total (4.5V)
Qgd
Gate Charge Gate to Drain
Qgs
Gate Charge Gate to Source
Qg(th)
Gate Charge at Vth
Qoss
Output Charge
td(on)
Turn On Delay Time
tr
Rise Time
td(off)
Turn Off Delay Time
tf
Fall Time
VGS = 0V, VDS = 15V, f = 1MHz
VDS = 15V, ID = 11A
VDS = 13V, VGS = 0V
VDS = 15V, VGS = 4.5V,
IDS = 11A, RG = 2Ω
1060
1272
pF
247
296
pF
19
24
pF
1.4
1.9
Ω
6
7.2
nC
1.4
nC
2.8
nC
1.6
nC
7.2
nC
9.1
ns
15.5
ns
11.9
ns
4.3
ns
Diode Characteristics
VSD
Diode Forward Voltage
ISD = 11A, VGS = 0V
0.8
Qrr
Reverse Recovery Charge
8.7
nC
trr
Reverse Recovery Time
VDS= 13.5V, IF = 11A,
di/dt = 300A/μs
1
V
13.5
ns
THERMAL CHARACTERISTICS
(TA = 25°C unless otherwise stated)
PARAMETER
RθJC
Thermal Resistance Junction to Case (1)
RθJA
Thermal Resistance Junction to Ambient (1) (2)
(1)
(2)
2
MIN
TYP
MAX
UNIT
4.2
°C/W
52.3
°C/W
RθJC is determined with the device mounted on a 1-inch2 (6.45-cm2), 2-oz. (0.071-mm thick) Cu pad on a 1.5-inch × 1.5-inch (3.81-cm ×
3.81-cm), 0.06-inch (1.52-mm) thick FR4 PCB. RθJC is specified by design, whereas RθJA is determined by the user’s board design.
Device mounted on FR4 material with 1-inch2 (6.45-cm2), 2-oz. (0.071-mm thick) Cu.
Copyright © 2012, Texas Instruments Incorporated
CSD17551Q5A
www.ti.com
GATE
SLPS375 – MAY 2012
GATE
Source
N-Chan 5x6 QFN TTA MIN Rev3
N-Chan 5x6 QFN TTA MAX Rev3
Max RθJA = 52.3°C/W
when mounted on
1 inch2 (6.45 cm2) of 2oz. (0.071-mm thick)
Cu.
Source
Max RθJA = 133°C/W
when mounted on a
minimum pad area of
2-oz. (0.071-mm thick)
Cu.
DRAIN
DRAIN
M0137-02
M0137-01
TYPICAL MOSFET CHARACTERISTICS
(TA = 25°C unless otherwise stated)
Figure 2. Transient Thermal Impedance
Copyright © 2012, Texas Instruments Incorporated
3
CSD17551Q5A
SLPS375 – MAY 2012
www.ti.com
TYPICAL MOSFET CHARACTERISTICS (continued)
(TA = 25°C unless otherwise stated)
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
100
100
IDS - Drain-to-Source Current - A
IDS - Drain-to-Source Current - A
VDS = 5V
80
60
40
VGS =10V
VGS =6.5V
VGS =3.5V
20
0
0
1
2
3
4
VDS - Drain-to-Source Voltage - V
80
60
40
0
5
TC = 125°C
TC = 25°C
TC = −55°C
20
0
1
G001
Figure 3. Saturation Characteristics
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
8
C − Capacitance − nF
VGS - Gate-to-Source Voltage (V)
Ciss = Cgd + Cgs
Coss = Cds + Cgd
Crss = Cgd
6
4
2
1.2
0.9
0.6
0.3
0
3
6
9
Qg - Gate Charge - nC (nC)
12
0
15
0
5
10
15
20
25
VDS - Drain-to-Source Voltage - V
G001
Figure 5. Gate Charge
30
G001
Figure 6. Capacitance
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
25
2.5
RDS(on) - On-State Resistance - mΩ
ID = 250uA
VGS(th) - Threshold Voltage - V
G001
1.5
ID = 11A
VDS = 15V
0
5
Figure 4. Transfer Characteristics
10
2
1.5
1
0.5
−75
−25
25
75
125
TC - Case Temperature - ºC
Figure 7. Threshold Voltage vs. Temperature
4
2
3
4
VGS - Gate-to-Source Voltage - V
175
G001
TC = 25°C Id = 11A
TC = 125ºC Id = 11A
20
15
10
5
0
0
2
4
6
8
10
12
14
16
VGS - Gate-to- Source Voltage - V
18
20
G001
Figure 8. On-State Resistance vs. Gate-to-Source Voltage
Copyright © 2012, Texas Instruments Incorporated
CSD17551Q5A
www.ti.com
SLPS375 – MAY 2012
TYPICAL MOSFET CHARACTERISTICS (continued)
(TA = 25°C unless otherwise stated)
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
1.8
1.6
100
VGS = 4.5V
VGS = 6V
VGS = 10V
ID =11A
ISD − Source-to-Drain Current - A
Normalized On-State Resistance
2
1.4
1.2
1
0.8
0.6
0.4
−75
−25
25
75
125
TC - Case Temperature - ºC
175
TC = 25°C
TC = 125°C
10
1
0.1
0.01
0.001
0.0001
0
0.2
0.4
0.6
0.8
VSD − Source-to-Drain Voltage - V
G001
Figure 9. Normalized On-State Resistance vs. Temperature
1
G001
Figure 10. Typical Diode Forward Voltage
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
− IAV - Peak Avalanche Current- A
200
TC = 25ºC
TC = 125ºC
100
10
1
0.001
Figure 11. Maximum Safe Operating Area
0.01
0.1
TAV - Time in Avalanche - mS
1
G001
Figure 12. Single Pulse Unclamped Inductive Switching
TEXT ADDED FOR SPACING
− IDS - Drain- to- Source Current - A
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0.0
−50
−25
0
25
50
75
100 125
TC - Case Temperature - ºC
150
175
G001
Figure 13. Maximum Drain Current vs. Temperature
Copyright © 2012, Texas Instruments Incorporated
5
CSD17551Q5A
SLPS375 – MAY 2012
www.ti.com
MECHANICAL DATA
Q5A Package Dimensions
L
E2
H
K
7
D2
3
4
b
4
5
5
6
3
6
e
D1
7
2
2
8
8
1
1
q
L1
Top View
Bottom View
Side View
c
A
q
E1
E
Front View
M0135-01
DIM
6
MILLIMETERS
MIN
NOM
MAX
A
0.90
1.00
1.10
b
0.33
0.41
0.51
c
0.20
0.25
0.34
D1
4.80
4.90
5.00
D2
3.61
3.81
4.02
E
5.90
6.00
6.10
E1
5.70
5.75
5.80
E2
3.38
3.58
3.78
e
1.17
1.27
1.37
H
0.41
0.56
0.71
K
1.10
L
0.51
0.61
0.71
L1
0.06
0.13
0.20
θ
0°
12°
Copyright © 2012, Texas Instruments Incorporated
CSD17551Q5A
www.ti.com
SLPS375 – MAY 2012
Figure 14. Recommended PCB Pattern
DIM
F1
F7
F3
8
1
F2
F11
F5
F9
5
4
F6
MILLIMETERS
INCHES
MIN
MAX
MIN
MAX
F1
6.205
6.305
0.244
0.248
F2
4.46
4.56
0.176
0.18
F3
4.46
4.56
0.176
0.18
F4
0.65
0.7
0.026
0.028
F5
0.62
0.67
0.024
0.026
F6
0.63
0.68
0.025
0.027
F7
0.7
0.8
0.028
0.031
F8
0.65
0.7
0.026
0.028
F9
0.62
0.67
0.024
0.026
F10
4.9
5
0.193
0.197
F11
4.46
4.56
0.176
0.18
F8
F4
F10
M0139-01
For recommended circuit layout for PCB designs, see application note SLPA005 – Reducing Ringing Through
PCB Layout Techniques.
K0
4.00 ±0.10 (See Note 1)
0.30 ±0.05
2.00 ±0.05
+0.10
–0.00
12.00 ±0.30
Ø 1.50
1.75 ±0.10
Q5A Tape and Reel Information
5.50 ±0.05
B0
R 0.30 MAX
A0
8.00 ±0.10
Ø 1.50 MIN
A0 = 6.50 ±0.10
B0 = 5.30 ±0.10
K0 = 1.40 ±0.10
R 0.30 TYP
M0138-01
Notes:
1. 10-sprocket hole-pitch cumulative tolerance ±0.2
2. Camber not to exceed 1mm in 100mm, noncumulative over 250mm
3. Material: black static-dissipative polystyrene
4. All dimensions are in mm (unless otherwise specified)
5. A0 and B0 measured on a plane 0.3mm above the bottom of the pocket
Copyright © 2012, Texas Instruments Incorporated
7
PACKAGE OPTION ADDENDUM
www.ti.com
10-Jul-2012
PACKAGING INFORMATION
Orderable Device
CSD17551Q5A
Status
(1)
ACTIVE
Package Type Package
Drawing
SON
DQJ
Pins
Package Qty
8
2500
Eco Plan
(2)
Pb-Free (RoHS
Exempt)
Lead/
Ball Finish
CU SN
MSL Peak Temp
(3)
Samples
(Requires Login)
Level-1-260C-UNLIM
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
10-Jul-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
CSD17551Q5A
Package Package Pins
Type Drawing
SON
DQJ
8
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
2500
330.0
12.4
Pack Materials-Page 1
6.3
B0
(mm)
K0
(mm)
P1
(mm)
5.3
1.2
8.0
W
Pin1
(mm) Quadrant
12.0
Q1
PACKAGE MATERIALS INFORMATION
www.ti.com
10-Jul-2012
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
CSD17551Q5A
SON
DQJ
8
2500
340.0
340.0
38.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Mobile Processors
www.ti.com/omap
Wireless Connectivity
www.ti.com/wirelessconnectivity
TI E2E Community Home Page
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated