75 Ohm 1.6/5.6 Jack Right Angle Bulkhead Connector Crimp/ Solder Attachment For RG179, RG187, .362 inch DD Hole TECHNICAL DATA SHEET PE44268 75 Ohm 1.6/5.6 Jack Right Angle Bulkhead Connector Crimp/Solder Attachment For RG179, RG187, .362 inch DD Hole Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style Mount Method 1.6/5.6 Jack RG179,RG187 Crimp/Solder Right Angle Bulkhead Electrical Specifications Impedance, Ohms 75 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 1.035 [26.29] 0.433 [11.00] 0.705 [17.91] Weight, lbs [g] 0.027 [12.25] Connector Type Contact Material and Plating Contact Plating Specification Body Material and Plating Body Plating Specification Dielectric Type 1.6/5.6 Jack Beryllium Copper, Gold 30µ in. minimum Brass, Nickel 100µ in. minimum Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm 1.6/5.6 Jack Right Angle Bulkhead Connector Crimp/Solder Attachment For RG179, RG187, .362 inch DD Hole PE44268 PE44268 REV 01 1 75 Ohm 1.6/5.6 Jack Right Angle Bulkhead Connector Crimp/ Solder Attachment For RG179, RG187, .362 inch DD Hole TECHNICAL DATA SHEET PE44268 Plotted and Other Data Notes: Values at 25 °C, sea level 75 Ohm 1.6/5.6 Jack Right Angle Bulkhead Connector Crimp/Solder Attachment For RG179, RG187, .362 inch DD Hole from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm 1.6/5.6 Jack Right Angle Bulkhead Connector Crimp/Solder Attachment For RG179, RG187, .362 inch DD Hole PE44268 URL: http://www.pasternack.com/1.6-5.6-jack-standard-rg179-rg187-connector-pe44268-p.aspx PE44268 REV 01 2 © 2013 Pasternack Enterprises All Rights Reserved PE44268 REV 01 INSTALL CABLE INTO BODY OF. CONNECTOR AND SOFT SOLDER CENTER CONDUCTOR IN PLACE. CRIMP FERRULE, INSERT INSULATOR & SCREW CAP. 2. 3. FERRULE: .128" HEX CRIMP TOOL CRIMP SIZE REQUIRED STRIP CABLE AS SHOWN. SLIDE FERRULE OVER CABLE 1. ASSEMBLY PROCEDURES FSCM NO. 53919 PE44268 DWG TITLE CAD FILE 070202 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. 75 Ohm 1.6/5.6 Jack Right Angle Bulkhead Connector Crimp/ Solder Attachment For RG179, RG187, .362 inch DD Hole PE44268 CAD Drawing 3