SSMB Jack Bulkhead Connector Crimp/Solder Attachment For RG178, RG196, .126 inch D Hole TECHNICAL DATA SHEET PE4337 SSMB Jack Bulkhead Connector Crimp/Solder Attachment For RG178, RG196, .126 inch D Hole Configuration Connector Connector Specification Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style Mount Method Electrical Specifications Frequency Range, GHz Impedance, Ohms Maximum VSWR Maximum Operating Voltage, Volts SSMB Jack MIL-PRF-39012 RG178,RG196 Crimp/Solder Straight Bulkhead DC to 12.4 50 1.5:1 250 Mechanical Specifications Temperature Operating Range, deg C -65 to +165 Size Length, in [mm] Width/Dia., in [mm] 0.73 [18.54] 0.156 [3.96] Weight, lbs [g] 0.006 [2.72] Connector Type Mating Cycles Contact Material and Plating Contact Plating Specification Body Material and Plating Body Plating Specification Dielectric Type SSMB Jack 500 Beryllium Copper, Gold MIL-PRF-39012 Brass, Gold MIL-PRF-39012 Teflon . Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SSMB Jack Bulkhead Connector Crimp/Solder Attachment For RG178, RG196, .126 inch D Hole PE4337 PE4337 REV 01 1 SSMB Jack Bulkhead Connector Crimp/Solder Attachment For RG178, RG196, .126 inch D Hole TECHNICAL DATA SHEET PE4337 Compliance Certifications (visit www.Pasternack.com for current document) Plotted and Other Data Notes: Values at 25 °C, sea level SSMB Jack Bulkhead Connector Crimp/Solder Attachment For RG178, RG196, .126 inch D Hole from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SSMB Jack Bulkhead Connector Crimp/Solder Attachment For RG178, RG196, .126 inch D Hole PE4337 URL: http://www.pasternack.com/ssmb-jack-standard-rg178-rg196-connector-pe4337-p.aspx PE4337 REV 01 2 © 2013 Pasternack Enterprises All Rights Reserved PE4337 REV 01 CONTACT: SOLDER FERRULE: .100" HEX CRIMP TOOL CRIMP SIZE REQUIRED 4. SLIDE ASSEMBLY INTO BODY & TIGHTEN. 3. SLIDE PTFE (3) OVER CENTER CONDUCTOR. SOLDER CONTACT (4) TO CENTER CONDUCTOR. 2. ADD CRIMP NUT (2) BY SLIDING EXTENSION BETWEEN BRAID & DIELECTRIC. SLIDE FERRULE (1) OVER BRAID & CRIMP. 1. STRIP CABLE AS SHOWN & SLIDE FERRULE (1) ONTO CABLE. TIN CENTER CONDUCTOR. ASSEMBLY PROCEDURES REV. - CAD FILE 050802 SCALE N/A SIZE A 2233 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE4337 DWG TITLE SSMB Jack Bulkhead Connector Crimp/Solder Attachment For RG178, RG196, .126 inch D Hole PE4337 CAD Drawing 3