TNC Male Right Angle Connector Crimp/Solder Attachment For RG55, RG141, RG142, RG223, RG400 TECHNICAL DATA SHEET PE4450 Configuration Connector Connector Specification Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style Electrical Specifications Impedance, Ohms Maximum Operating Voltage, Volts TNC Male MIL-STD-348A RG55,RG141,RG142,RG223,RG400 Crimp/Solder Right Angle 50 500 Mechanical Specifications Temperature Operating Range, deg C -65 to +165 Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 1.39 [35.31] 0.57 [14.48] 1.14 [28.96] Weight, lbs [g] 0.068 [30.84] Connector Type Contact Material and Plating Contact Plating Specification Coupling Nut Material and Plating Coupling Nut Plating Specification Body Material and Plating Body Plating Specification Dielectric Type TNC Male Brass, Gold 30µ in. minimum Brass, Nickel 100µ in. minimum Brass, Nickel 100µ in. minimum Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: TNC Male Right Angle Connector Crimp/Solder Attachment For RG55, RG141, RG142, RG223, RG400 PE4450 PE4450 REV 1.0 1 TNC Male Right Angle Connector Crimp/Solder Attachment For RG55, RG141, RG142, RG223, RG400 TECHNICAL DATA SHEET PE4450 Plotted and Other Data Notes: Values at 25 °C, sea level TNC Male Right Angle Connector Crimp/Solder Attachment For RG55, RG141, RG142, RG223, RG400 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: TNC Male Right Angle Connector Crimp/Solder Attachment For RG55, RG141, RG142, RG223, RG400 PE4450 URL: http://www.pasternack.com/tnc-male-standard-rg55-rg141-rg142-rg223-rg400-connector-pe4450-p.aspx PE4450 REV 1.0 2 © 2014 Pasternack Enterprises All Rights Reserved PE4450 REV 1.0 INSTALL CABLE INTO BODY. PUSH CABLE FORWARD UNTIL CONTACT IS IN THE CORRECT POSITION. SLIDE FERRULE OVER BRAID & CRIMP. 2. 3. CONTACT: .068" HEX CRIMP TOOL FERRULE: .213" HEX CRIMP TOOL CRIMP SIZE REQUIRED STRIP CABLE AS SHOWN. SLIDE FERRULE OVER CABLE & CRIMP CONTACT TO CENTER CONDUCTOR. 1. ASSEMBLY PROCEDURES REV. - CAD FILE 051502 SCALE N/A SIZE A 2233 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE4450 DWG TITLE TNC Male Right Angle Connector Crimp/Solder Attachment For RG55, RG141, RG142, RG223, RG400 PE4450 CAD Drawing 3